[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i3-2105 CPU @ 3.10GHz (3093.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 21474836480 (20480 MB) [...] avail memory = 20778491904 (19815 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <GBT GBTUACPI> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] arc4random: no preloaded entropy cache [...] ioapic0: MADT APIC ID 2 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1546522174 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14385152 bytes at 0xffffffff8249bcc0 [...] 000.000047 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <GBT GBTUACPI> on motherboard [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20200430/dspkginit-605) [...] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PCI0.LNK9 (20200430/dspkginit-605) [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xf9000000-0xf9ffffff,0xd0000000-0xdfffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xfaffc000-0xfaffffff irq 17 at device 0.1 on pci1 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Cougar Point HDA Controller> mem 0xfbff4000-0xfbff7fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfbdf8000-0xfbdfffff irq 17 at device 0.0 on pci2 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus1 on xhci0 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 18 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x2c800000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <PCI bus> on pcib6 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb1f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 [...] ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] orm0: <ISA Option ROM> at iomem 0xcf000-0xd17ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] arc4random: no preloaded entropy cache [...] hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC889 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC889 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm6: <Realtek ALC889 (Rear Digital)> at nid 30 on hdaa1 [...] pcm7: <Realtek ALC889 (Onboard Digital)> at nid 17 on hdaa1 [...] ugen1.1: <0x1b6f XHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] arc4random: no preloaded entropy cache [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: pass0,cd0 in 'Slot 04', SATA Slot: scbus4 target 0 [...] cd0 at ahcich4 bus 0 scbus4 target 0 lun 0 [...] cd0: <PIONEER BD-RW BDR-206 1.05> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub0: 4 ports with 4 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.3: <A4TECH USB Device> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <A4TECH USB Device, class 0/0, rev 1.10/1.91, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <vendor 0x04d9 USB Keyboard> at usbus0 [...] ukbd1 on uhub3 [...] ukbd1: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus0 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen2.3: <UFD 3.0 Silicon-Power8G> at usbus2 [...] umass0 on uhub4 [...] umass0: <UFD 3.0 Silicon-Power8G, class 0/0, rev 2.10/0.0a, addr 3> on usbus2 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:7:0: Attached to scbus7 [...] da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da0: <UFD 3.0 Silicon-Power8G 1.00> Removable Direct Access SPC-3 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7408MB (15171584 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT header is not in the last LBA. [...] ugen0.5: <EPSON USB2.0 Printer (Hi-speed)> at usbus0 [...] GEOM: iso9660/LIVE: the secondary GPT header is not in the last LBA. [...] ugen2.4: <Realtek Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter> at usbus2 [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.6: <Sonix Technology Co., Ltd. A4tech FHD 1080P PC Camera> at usbus0 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT [...] ugen1.2: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen1.2: <Samsung Flash Drive> at usbus1 [...] umass1 on uhub0 [...] umass1: <Samsung Flash Drive, class 0/0, rev 2.10/11.00, addr 1> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0x4000 [...] umass1:8:1: Attached to scbus8 [...] da1 at umass-sim1 bus 1 scbus8 target 0 lun 0 [...] da1: <Samsung Flash Drive 1100> Removable Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 40.000MB/s transfers [...] da1: 61188MB (125313283 512 byte sectors) [...] da1: quirks=0x2<NO_6_BYTE> [...] Trying to mount root from zfs:livecd []... [...] Cuse v0.1.36 @ /dev/cuse [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ums0 on uhub3 [...] ums0: <A4TECH USB Device, class 0/0, rev 1.10/1.91, addr 3> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=0 [...] uhid0 on uhub3 [...] uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus0 [...] ulpt0 on uhub3 [...] ulpt0: <EPSON USB2.0 Printer (Hi-speed), class 0/0, rev 2.00/1.00, addr 5> on usbus0 [...] ulpt0: using bi-directional mode [...] GEOM: iso9660/LIVE: the secondary GPT header is not in the last LBA. [...] ubt0 on uhub4 [...] ubt0: <Bluetooth Radio> on usbus2 [...] uaudio0 on uhub3 [...] uaudio0: <A4tech FHD 1080P PC Camera> on usbus0 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 22050 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 11025 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm8: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ichwd0: <Intel Cougar Point watchdog timer> on isa0 [...] ichwd0: ICH WDT present but disabled in BIOS or hardware [...] device_attach: ichwd0 attach returned 6 [...] nvidia0: <GeForce GTX 950> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.67 Thu Mar 11 00:01:57 UTC 2021 [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type