[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.68-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3887554560 (3707 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC" frequency 1497675528 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <network> at device 12.0 (no driver attached) [...] hdac0: <Intel (0x3198) HDA Controller> mem 0xa1610000-0xa1613fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1618000-0xa1619fff,0xa1622000-0xa16220ff,0xa1621000-0xa16217ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xa1200000-0xa12fffff,0xa1404000-0xa1407fff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xa1100000-0xa11fffff,0xa1400000-0xa1403fff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xa1504000-0xa1504fff,0xa1500000-0xa1503fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1600000-0xa160ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa161c000-0xa161cfff,0xa161b000-0xa161bfff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel (0x280d) HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel (0x280d) Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel (0x280d) (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SK hynix SC308 SATA 256GB 30001P10> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] mmcsd0: 16GB <MMCHC HAG8a4 15.2 SN ... MFG 04/2018 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.5: <vendor 0x8087 product 0x0aaa> at usbus0 [...] ugen0.6: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.7: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] re0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pid 1972 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 48349 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 70847 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 51711 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 66054 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] [HBSD SEGVGUARD] [syslog-ng (66054)] Suspending execution for 600 seconds after 5 crashes. [...] -> pid: 66054 ppid: 96645 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] [HBSD SEGVGUARD] [syslog-ng (96645)] Preventing execution due to repeated segfaults. [...] -> pid: 96645 ppid: 1 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 4 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 48m42s [...] uhub1: detached [...] ukbd0: detached [...] ums0: detached [...] uhub2: detached [...] uhub3: detached [...] uhub4: detached [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p16-HBSD #0 36f2183a3f4(stable/21.1)-dirty: Tue May 25 10:43:32 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 800x600 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz (1497.66-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000000<IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xa<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3887554560 (3707 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 2 3 1 [...] Timecounter "TSC" frequency 1497661712 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib0: no PRT entry for 0.0.INTA [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <network> at device 12.0 (no driver attached) [...] hdac0: <Intel (0x3198) HDA Controller> mem 0xa1610000-0xa1613fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0 [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1618000-0xa1619fff,0xa1622000-0xa16220ff,0xa1621000-0xa16217ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xa1200000-0xa12fffff,0xa1404000-0xa1407fff at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xa1100000-0xa11fffff,0xa1400000-0xa1403fff at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 20.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xa1504000-0xa1504fff,0xa1500000-0xa1503fff at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1600000-0xa160ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] sdhci_pci0: <Generic SD HCI> mem 0xa161c000-0xa161cfff,0xa161b000-0xa161bfff irq 39 at device 28.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 [...] ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode [...] ppbus0: <Parallel port bus> on ppc1 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC225 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC225 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC225 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] pcm1: <Realtek ALC225 (Front Analog Line-out)> at nid 27 on hdaa0 [...] hdacc1: <Intel (0x280d) HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel (0x280d) Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel (0x280d) (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SK hynix SC308 SATA 256GB 30001P10> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] mmcsd0: 16GB <MMCHC HAG8a4 15.2 SN ... MFG 04/2018 by 144 0x004a> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 (read-only) at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 (read-only) at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] mmcsd0: Error indicated: 2 Bad CRC [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 1> on usbus0 [...] uhub1: MTT enabled [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.4: <Generic 2-Port USB 2.0 Hub> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <Generic 2-Port USB 2.0 Hub, class 9/0, rev 2.10/1.41, addr 3> on usbus0 [...] uhub2: MTT enabled [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.5: <vendor 0x8087 product 0x0aaa> at usbus0 [...] ugen0.6: <Generic 4-Port USB 3.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <Interrupt In Interface> on usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] ugen0.7: <Generic 2-Port USB 3.0 Hub> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <Interrupt In Interface> on usbus0 [...] uhub4: 2 ports with 2 removable, self powered [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] GEOM: mmcsd0: corrupt or invalid GPT detected. [...] GEOM: mmcsd0: GPT rejected -- may not be recoverable. [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. [...] Error indicated: 1 Timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005200 | Blk cnt: 0x00000010 [...] sdhci_pci0-slot0: Argument: 0x00000010 | Trn mode: 0x00000037 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Error indicated: 1 Timeout [...] Blk size: 0x00005200 | Blk cnt: 0x00000010 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000037 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. [...] Error indicated: 1 Timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005200 | Blk cnt: 0x00000010 [...] sdhci_pci0-slot0: Argument: 0x00000200 | Trn mode: 0x00000037 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0001, but there is no active command. [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Error indicated: 1 Timeout [...] Blk size: 0x00005200 | Blk cnt: 0x00000010 [...] sdhci_pci0-slot0: Argument: 0x00000080 | Trn mode: 0x00000037 [...] sdhci_pci0-slot0: Present: 0x010f0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] sdhci_pci0-slot0: Controller timeout [...] sdhci_pci0-slot0: ============== REGISTER DUMP ============== [...] sdhci_pci0-slot0: Sys addr: 0x04040000 | Version: 0x00001002 [...] sdhci_pci0-slot0: Blk size: 0x00005080 | Blk cnt: 0x00000001 [...] sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000012 [...] sdhci_pci0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000025 [...] sdhci_pci0-slot0: Power: 0x0000000b | Blk gap: 0x00000080 [...] sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 [...] sdhci_pci0-slot0: Timeout: 0x00000007 | Int stat: 0x00000000 [...] sdhci_pci0-slot0: Int enab: 0x00000020 | Sig enab: 0x00000020 [...] sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000000b [...] sdhci_pci0-slot0: Caps: 0x546ec881 | Caps2: 0x80000807 [...] sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000 [...] sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 [...] sdhci_pci0-slot0: =========================================== [...] sdhci_pci0-slot0: Tuning failed, using fixed sampling clock [...] mmcsd0: Error indicated: 1 Timeout [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] mmcsd0: Partition switch error [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 2> on usbus0 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] re0: link state changed to UP [...] igb0: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled