[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.84-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8171589632 (7793 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa9000000-0xa9ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xaa314000-0xaa317fff irq 16 at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xaa300000-0xaa30ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] hdac1: <Intel Broadwell HDA Controller> mem 0xaa310000-0xaa313fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xaa204000-0xaa204fff,0xaa200000-0xaa203fff irq 18 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwn0: <Intel Centrino Advanced-N 6205> mem 0xaa100000-0xaa101fff irq 19 at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xaa004000-0xaa004fff,0xaa000000-0xaa003fff irq 16 at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xaa31a000-0xaa31a3ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xaa319000-0xaa3197ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1147343866 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SSD 128GB X0528A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub1: 15 ports with 15 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.3: <CHICONY Asus Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <CHICONY Asus Keyboard, class 0/0, rev 2.00/0.70, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] re0: link state changed to UP [...] re1: link state changed to DOWN [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x5040-0x505f mem 0xaa318000-0xaa3180ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub1 [...] uhid0: <CHICONY Asus Keyboard, class 0/0, rev 2.00/0.70, addr 2> on usbus0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 6m49s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.79-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8171560960 (7793 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa9000000-0xa9ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xaa314000-0xaa317fff irq 16 at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xaa300000-0xaa30ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] hdac1: <Intel Broadwell HDA Controller> mem 0xaa310000-0xaa313fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xaa204000-0xaa204fff,0xaa200000-0xaa203fff irq 18 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwn0: <Intel Centrino Advanced-N 6205> mem 0xaa100000-0xaa101fff irq 19 at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xaa004000-0xaa004fff,0xaa000000-0xaa003fff irq 16 at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xaa31a000-0xaa31a3ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xaa319000-0xaa3197ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1147343857 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SSD 128GB X0528A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub1: 15 ports with 15 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.3: <CHICONY Asus Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <CHICONY Asus Keyboard, class 0/0, rev 2.00/0.70, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] re0: link state changed to UP [...] re1: link state changed to DOWN [...] ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x5040-0x505f mem 0xaa318000-0xaa3180ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub1 [...] uhid0: <CHICONY Asus Keyboard, class 0/0, rev 2.00/0.70, addr 2> on usbus0 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 21m32s [...] uhub3: detached [...] uhub0: detached [...] re0: link state changed to DOWN [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x1f to 0x2f [...] CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.76-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8159145984 (7781 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-39 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa9000000-0xa9ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Broadwell HDA Controller> mem 0xaa314000-0xaa317fff irq 16 at device 3.0 on pci0 [...] xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xaa300000-0xaa30ffff irq 21 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] hdac1: <Intel Broadwell HDA Controller> mem 0xaa310000-0xaa313fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xaa204000-0xaa204fff,0xaa200000-0xaa203fff irq 18 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwn0: <Intel Centrino Advanced-N 6205> mem 0xaa100000-0xaa101fff irq 19 at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xaa004000-0xaa004fff,0xaa000000-0xaa003fff irq 16 at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xaa31a000-0xaa31a3ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xaa319000-0xaa3197ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1147343912 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SSD 128GB X0528A0> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub1: 15 ports with 15 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <CHICONY Asus Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <CHICONY Asus Keyboard, class 0/0, rev 2.00/0.70, addr 2> on usbus0 [...] kbd2 at ukbd0