[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1366x768 [...] module_register: cannot register pci/em from kernel; already loaded from if_em.ko [...] Module pci/em failed to register: 17 [...] module_register: cannot register pci/igb from kernel; already loaded from if_em.ko [...] Module pci/igb failed to register: 17 [...] CPU microcode: updated from 0xd6 to 0xf0 [...] CPU: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (3700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7655198720 (7300 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 8062 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] Cuse v0.1.37 @ /dev/cuse [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] [ath_dfs] loaded [...] [ath_rate] loaded [...] [ar9300] loaded [...] [ar5212] loaded [...] [ar5416] loaded [...] [ar5211] loaded [...] [ar5210] loaded [...] [ath] loaded [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xab7f2000-0xab7f201e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168 Gigabit Ethernet> port 0x3000-0x30ff mem 0xe1004000-0xe1004fff,0xe1000000-0xe1003fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff at device 2.0 on pci0 [...] acpi_video0: <ACPI video extension> on vgapci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xe1300000-0xe130ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5040-0x505f mem 0xe1328000-0xe1329fff,0xe132e000-0xe132e0ff,0xe132c000-0xe132c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xe1104000-0xe1104fff,0xe1100000-0xe1103fff at device 0.0 on pci2 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] ath0: <Atheros AR938x> mem 0xe1200000-0xe121ffff at device 0.0 on pci3 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 stream STBC transmit enabled [...] ath0: [HT] LDPC transmit/receive enabled [...] ath0: [HT] 2 RX streams; 2 TX streams [...] ath0: AR9380 mac 448.3 RF5110 phy 0.0 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0xe1324000-0xe1327fff,0xe1310000-0xe131ffff at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1847996247 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] hdacc0: <Realtek ALC221 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC221 (Analog)> at nid 23 and 26,27 on hdaa0 [...] pcm1: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from ufs:/dev/ada0p2 [noatime,rw]... [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <CT240BX500SSD1 M6CR013> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: cd0,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <hp HLDS DVDRW GUD0N SD02> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm] Got stolen memory base 0xae800000, size 0x20000000 [...] skl_dmc_ver1_27.bin: could not load binary firmware /boot/firmware/skl_dmc_ver1_27.bin either [...] i915/skl_dmc_ver1_27.bin: could not load binary firmware /boot/firmware/i915/skl_dmc_ver1_27.bin either [...] i915_skl_dmc_ver1_27.bin: could not load binary firmware /boot/firmware/i915_skl_dmc_ver1_27.bin either [...] drmn0: successfully loaded firmware image 'i915/skl_dmc_ver1_27.bin' [...] drmn0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] lkpi_iic2: <LinuxKPI I2C> on drmn0 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic3: <LinuxKPI I2C> on drm1 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drm3 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] lkpi_iic5: <LinuxKPI I2C> on drm6 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 [...] uhub0: 20 ports with 20 removable, self powered [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=768 width=1366 depth=32 [...] pbase=0xd0000000 vbase=0xfffff800d0000000 [...] name=drmn0 flags=0x0 stride=5504 bpp=32 [...] end FB_INFO [...] pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xe132a000-0xe132afff at device 20.2 on pci0 [...] ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xefa0-0xefbf mem 0xe132d000-0xe132d0ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] wlan0: Ethernet address: ... [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] re0: changing name to 'eth0' [...] re1: changing name to 'eth1' [...] lo0: link state changed to UP [...] ugen0.2: <Realtek USB 10/100/1000 LAN> at usbus0 [...] eth0: link state changed to UP [...] ugen0.3: <Sonix Technology Co., Ltd. JOYACCESS JA-Webcam> at usbus0 [...] ugen0.4: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.5: <Jieli Technology Captain 100> at usbus0 [...] uaudio0 on uhub0 [...] uaudio0: <Jieli Technology Captain 100, class 0/0, rev 1.10/1.00, addr 4> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: No MIDI sequencer. [...] pcm3 on uaudio0 [...] uaudio0: HID volume keys found. [...] ugen0.6: <UGREEN USB3.0 Card Reader> at usbus0 [...] umass0 on uhub0 [...] umass0: <UGREEN USB3.0 Card Reader, class 0/0, rev 3.00/1.00, addr 5> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0402 [...] umass0:3:0: Attached to scbus3 [...] ure0 on uhub0 [...] ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 2.10/30.00, addr 1> on usbus0 [...] uaudio1 on uhub0 [...] uaudio1: <Sonix Technology Co., Ltd. JOYACCESS JA-Webcam, class 239/2, rev 2.00/1.00, addr 2> on usbus0 [...] uaudio1: No playback. [...] uaudio1: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio1: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio1: Record[0]: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio1: Record[0]: 22050 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio1: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio1: Record[0]: 11025 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio1: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio1: No MIDI sequencer. [...] pcm4 on uaudio1 [...] uaudio1: No HID volume keys found. [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 3> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub0 [...] uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.11, addr 3> on usbus0