[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz (2600.14-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 139586437120 (133120 MB) [...] avail memory = 133664645120 (127472 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 64 CPUs [...] FreeBSD/SMP: 2 package(s) x 16 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 1 16 32 35 55 22 46 45 23 63 60 47 56 3 31 37 48 6 18 53 11 54 2 41 30 57 27 21 49 51 10 19 44 20 61 43 40 8 7 12 39 17 50 42 26 13 15 38 25 62 52 29 59 58 24 34 9 33 14 28 36 5 4 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.5 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.5 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] mpr0: <Avago Technologies (LSI) SAS3008> port 0x2000-0x20ff mem 0x9cb00000-0x9cb0ffff,0x9ba00000-0x9bafffff irq 26 at device 0.0 numa-domain 0 on pci3 [...] mpr0: Firmware: XXX.XXX.XXX.XXX, Driver: XXX.XXX.XXX.XXX-fbsd [...] mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray> [...] pcib4: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] ixl0: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.1-k> mem 0x93000000-0x93ffffff,0x94818000-0x9481ffff irq 32 at device 0.0 numa-domain 0 on pci4 [...] ixl0: fw 6.0.48442 api 1.7 nvm 6.01 etid 800034ad oem 1.262.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 16 RX queues 16 TX queues [...] ixl0: Using MSI-X interrupts with 17 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl1: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.1-k> mem 0x92000000-0x92ffffff,0x94810000-0x94817fff irq 32 at device 0.1 numa-domain 0 on pci4 [...] ixl1: fw 6.0.48442 api 1.7 nvm 6.01 etid 800034ad oem 1.262.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 16 RX queues 16 TX queues [...] ixl1: Using MSI-X interrupts with 17 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl2: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.1-k> mem 0x91000000-0x91ffffff,0x94808000-0x9480ffff irq 32 at device 0.2 numa-domain 0 on pci4 [...] ixl2: fw 6.0.48442 api 1.7 nvm 6.01 etid 800034ad oem 1.262.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 16 RX queues 16 TX queues [...] ixl2: Using MSI-X interrupts with 17 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl3: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.1-k> mem 0x90000000-0x90ffffff,0x94800000-0x94807fff irq 32 at device 0.3 numa-domain 0 on pci4 [...] ixl3: fw 6.0.48442 api 1.7 nvm 6.01 etid 800034ad oem 1.262.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 16 RX queues 16 TX queues [...] ixl3: Using MSI-X interrupts with 17 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 16/1024, RX 16/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] ixl4: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x98000000-0x98ffffff,0x99018000-0x9901ffff irq 40 at device 0.0 numa-domain 0 on pci5 [...] ixl4: fw 8.84.66032 api 1.14 nvm 8.40 etid 8000af86 oem 20.5120.13 [...] ixl4: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl4: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl4: Using 16 RX queues 16 TX queues [...] ixl4: Using MSI-X interrupts with 17 vectors [...] ixl4: Ethernet address: ... [...] ixl4: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl4: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl4: Failed to initialize SR-IOV (error=2) [...] ixl4: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl5: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x97000000-0x97ffffff,0x99010000-0x99017fff irq 40 at device 0.1 numa-domain 0 on pci5 [...] ixl5: fw 8.84.66032 api 1.14 nvm 8.40 etid 8000af86 oem 20.5120.13 [...] ixl5: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl5: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl5: Using 16 RX queues 16 TX queues [...] ixl5: Using MSI-X interrupts with 17 vectors [...] ixl5: Ethernet address: ... [...] ixl5: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl5: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl5: Failed to initialize SR-IOV (error=2) [...] ixl5: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl6: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x96000000-0x96ffffff,0x99008000-0x9900ffff irq 40 at device 0.2 numa-domain 0 on pci5 [...] ixl6: fw 8.84.66032 api 1.14 nvm 8.40 etid 8000af86 oem 20.5120.13 [...] ixl6: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl6: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl6: Using 16 RX queues 16 TX queues [...] ixl6: Using MSI-X interrupts with 17 vectors [...] ixl6: Ethernet address: ... [...] ixl6: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl6: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl6: Failed to initialize SR-IOV (error=2) [...] ixl6: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl7: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x95000000-0x95ffffff,0x99000000-0x99007fff irq 40 at device 0.3 numa-domain 0 on pci5 [...] ixl7: fw 8.84.66032 api 1.14 nvm 8.40 etid 8000af86 oem 20.5120.13 [...] ixl7: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl7: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl7: Using 16 RX queues 16 TX queues [...] ixl7: Using MSI-X interrupts with 17 vectors [...] ixl7: Ethernet address: ... [...] ixl7: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl7: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl7: Failed to initialize SR-IOV (error=2) [...] ixl7: netmap queues/slots: TX 16/1024, RX 16/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x9cd11000-0x9cd117ff irq 16 at device 17.4 numa-domain 0 on pci2 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x9cd00000-0x9cd0ffff at device 20.0 numa-domain 0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x9cd13000-0x9cd133ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib7: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pci7: <PCI bus> numa-domain 0 on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 [...] pci9: <PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 [...] pci11: <PCI bus> numa-domain 0 on pcib11 [...] vgapci0: <VGA-compatible display> mem 0x9a000000-0x9affffff,0x9b800000-0x9b803fff,0x9b000000-0x9b7fffff irq 19 at device 0.0 numa-domain 0 on pci11 [...] vgapci0: Boot video device [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x9cd12000-0x9cd123ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x9cd10000-0x9cd107ff irq 16 at device 31.2 numa-domain 0 on pci2 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] ahcich5: <AHCI channel> at channel 1 on ahci1 [...] ahcich6: <AHCI channel> at channel 2 on ahci1 [...] ahcich7: <AHCI channel> at channel 3 on ahci1 [...] ahcich8: <AHCI channel> at channel 4 on ahci1 [...] ahcich9: <AHCI channel> at channel 5 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci12: <ACPI PCI bus> numa-domain 1 on pcib12 [...] pcib13: <ACPI PCI-PCI bridge> irq 71 at device 1.0 numa-domain 1 on pci12 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] ixl8: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.1-k> mem 0xcb000000-0xcbffffff,0xcc818000-0xcc81ffff irq 50 at device 0.0 numa-domain 1 on pci13 [...] ixl8: fw 6.0.48442 api 1.7 nvm 6.01 etid 800034ad oem 1.262.0 [...] ixl8: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl8: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl8: Using 16 RX queues 16 TX queues [...] ixl8: Using MSI-X interrupts with 17 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=32 [...] ixl8: taskqgroup_attach_cpu failed 22 [...] ixl8: Ethernet address: ... [...] ixl8: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl8: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl8: SR-IOV ready [...] ixl8: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl9: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.1-k> mem 0xca000000-0xcaffffff,0xcc810000-0xcc817fff irq 50 at device 0.1 numa-domain 1 on pci13 [...] ixl9: fw 6.0.48442 api 1.7 nvm 6.01 etid 800034ad oem 1.262.0 [...] ixl9: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl9: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl9: Using 16 RX queues 16 TX queues [...] ixl9: Using MSI-X interrupts with 17 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=32 [...] ixl9: taskqgroup_attach_cpu failed 22 [...] ixl9: Ethernet address: ... [...] ixl9: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl9: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl9: SR-IOV ready [...] ixl9: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl10: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.1-k> mem 0xc9000000-0xc9ffffff,0xcc808000-0xcc80ffff irq 50 at device 0.2 numa-domain 1 on pci13 [...] ixl10: fw 6.0.48442 api 1.7 nvm 6.01 etid 800034ad oem 1.262.0 [...] ixl10: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl10: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl10: Using 16 RX queues 16 TX queues [...] ixl10: Using MSI-X interrupts with 17 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=32 [...] ixl10: taskqgroup_attach_cpu failed 22 [...] ixl10: Ethernet address: ... [...] ixl10: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl10: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl10: SR-IOV ready [...] ixl10: netmap queues/slots: TX 16/1024, RX 16/1024 [...] ixl11: <Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T - 2.3.1-k> mem 0xc8000000-0xc8ffffff,0xcc800000-0xcc807fff irq 50 at device 0.3 numa-domain 1 on pci13 [...] ixl11: fw 6.0.48442 api 1.7 nvm 6.01 etid 800034ad oem 1.262.0 [...] ixl11: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, MDIO shared [...] ixl11: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl11: Using 16 RX queues 16 TX queues [...] ixl11: Using MSI-X interrupts with 17 vectors [...] taskqgroup_attach_cpu: qid not found for iov cpu=32 [...] ixl11: taskqgroup_attach_cpu failed 22 [...] ixl11: Ethernet address: ... [...] ixl11: Allocating 16 queues for PF LAN VSI; 16 queues active [...] ixl11: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl11: SR-IOV ready [...] ixl11: netmap queues/slots: TX 16/1024, RX 16/1024 [...] pcib14: <ACPI PCI-PCI bridge> irq 71 at device 3.0 numa-domain 1 on pci12 [...] pci14: <ACPI PCI bus> numa-domain 1 on pcib14 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xccb00000-0xccb07fff irq 64 at device 0.0 [...] ixl0: Link is up, 1 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: Full [...] ixl0: link state changed to UP [...] numa-domain 1 on pci14 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus3 numa-domain 1 on xhci1 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] ixl1: Link is up, 1 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: True, Flow Control: None [...] ixl1: link state changed to UP [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est23 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est24 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est25 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est26 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est27 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est28 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est29 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est30 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est31 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est32 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est33 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est34 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est35 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est36 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est37 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est38 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est39 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est40 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est41 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est42 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est43 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est44 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est45 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est46 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est47 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est48 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est49 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est50 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est51 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est52 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est53 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est54 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est55 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est56 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est57 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est58 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est59 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est60 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est61 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est62 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1ca000001a00 [...] device_attach: est63 attach returned 6 [...] Timecounter "TSC-low" frequency 1300000078 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen3.1: <0x1b21 XHCI root HUB> at usbus3 [...] uhub0 numa-domain 1 on usbus3 [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 numa-domain 0 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub3 numa-domain 0 on usbus0 [...] uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x000a> enclosureHandle<0x0002> slot 0 [...] mpr0: At enclosure level 1 and connector name ( ) [...] mpr0: Found device <c01<SspTarg,Direct>,End Device> <12.0Gbps> handle<0x000b> enclosureHandle<0x0002> slot 1 [...] mpr0: At enclosure level 1 and connector name ( ) [...] mpr0: Found device <4c11<SmpInit,SspTarg,Direct,SepDev>,End Device> <12.0Gbps> handle<0x000c> enclosureHandle<0x0002> slot 10 [...] mpr0: At enclosure level 1 and connector name ( ) [...] ses0 at mpr0 bus 0 scbus0 target 18 lun 0 [...] ses0: <DP BP13G+EXP 3.35> Fixed Enclosure Services SPC-4 SCSI device [...] ses0: 1200.000MB/s transfers [...] ses0: Command Queueing enabled [...] ses0: SES Device [...] ses1 at ahciem0 bus 0 scbus5 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] ses2 at ahciem1 bus 0 scbus12 target 0 lun 0 [...] ses2: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses2: SEMB SES Device [...] da0 at mpr0 bus 0 scbus0 target 8 lun 0 [...] da0: <SAMSUNG MZILT960HBHQ/007 GXA0> Fixed Direct Access SPC-5 SCSI device [...] da0: Serial Number... [...] da0: 1200.000MB/s transfers [...] da0: Command Queueing enabled [...] da0: 915715MB (1875385008 512 byte sectors) [...] da1 at mpr0 bus 0 scbus0 target 9 lun 0 [...] da1: <SAMSUNG MZILT960HBHQ/007 GXA0> Fixed Direct Access SPC-5 SCSI device [...] da1: Serial Number... [...] da1: 1200.000MB/s transfers [...] da1: Command Queueing enabled [...] da1: 915715MB (1875385008 512 byte sectors) [...] ses0: da0,pass0 in 'Drive Slot 0', SAS Slot: 2 phys at slot 0 [...] ses0: phy 0: SAS device type 1 phy 0 Target ( SSP ) [...] ses0: phy 0: parent 500056b3e20feeff addr 5002538b71832fe2 [...] ses0: phy 1: SAS device type 0 phy 0 [...] ses0: phy 1: parent 0 addr 0 [...] ses0: da1,pass1 in 'Drive Slot 1', SAS Slot: 2 phys at slot 1 [...] ses0: phy 0: SAS device type 1 phy 0 Target ( SSP ) [...] ses0: phy 0: parent 500056b3e20feeff addr 5002538b71832a82 [...] ses0: phy 1: SAS device type 0 phy 0 [...] ses0: phy 1: parent 0 addr 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub_reattach_port: port 2 U1 timeout failed, error=USB_ERR_IOERROR [...] uhub_reattach_port: port 2 U2 timeout failed, error=USB_ERR_IOERROR [...] ugen3.2: <GenesysLogic USB3.2 Hub> at usbus3 [...] uhub4 numa-domain 1 on uhub0 [...] uhub4: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/77.12, addr 1> on usbus3 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 [...] ugen0.2: <STMicroelectronics HID Device in FS Mode> at usbus0 [...] ukbd0 numa-domain 0 on uhub3 [...] ukbd0: <STMicroelectronics HID Device in FS Mode, class 0/0, rev 2.00/2.00, addr 1> on usbus0 [...] kbd1 at ukbd0 [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub5 numa-domain 0 on uhub1 [...] uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 [...] uhub6 numa-domain 0 on uhub2 [...] uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] uhub4: 4 ports with 4 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub7 numa-domain 0 on uhub3 [...] uhub7: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] ugen3.3: <GenesysLogic USB2.1 Hub> at usbus3 [...] uhub8 numa-domain 1 on uhub0 [...] uhub8: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/77.12, addr 2> on usbus3 [...] uhub8: MTT enabled [...] uhub7: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus3 [...] uhub8: 4 ports with 4 removable, self powered