[...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE #0 stable/22.1-n248009-8a57d6e3c1f: Fri Nov 19 13:39:07 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 12.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f) [...] VT(vga): resolution 640x480 [...] module_register: cannot register pci/igb from kernel; already loaded from if_igb.ko [...] Module pci/igb failed to register: 17 [...] CPU: AMD EPYC 3201 8-Core Processor (1497.22-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f12 Family=0x17 Model=0x1 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16457838592 (15695 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INSYDE WALLABY> [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0: MADT APIC ID 128 != hw id 0 [...] ioapic1: MADT APIC ID 129 != hw id 0 [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 6 3 1 4 7 2 5 [...] Timecounter "TSC" frequency 1497222225 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <INSYDE WALLABY> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.21> port 0x5000-0x501f mem 0x80800000-0x8081ffff,0x80820000-0x80823fff at device 0.0 on pci1 [...] igb0: Using MSIX interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: Bound queue 0 to cpu 0 [...] igb0: Bound queue 1 to cpu 1 [...] igb0: Bound queue 2 to cpu 2 [...] igb0: Bound queue 3 to cpu 3 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.21> port 0x4000-0x401f mem 0x80700000-0x8071ffff,0x80720000-0x80723fff at device 0.0 on pci2 [...] igb1: Using MSIX interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: Bound queue 0 to cpu 4 [...] igb1: Bound queue 1 to cpu 5 [...] igb1: Bound queue 2 to cpu 6 [...] igb1: Bound queue 3 to cpu 7 [...] pcib3: <ACPI PCI-PCI bridge> at device 1.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.21> port 0x3000-0x301f mem 0x80600000-0x8061ffff,0x80620000-0x80623fff at device 0.0 on pci3 [...] igb2: Using MSIX interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: Bound queue 0 to cpu 0 [...] igb2: Bound queue 1 to cpu 1 [...] igb2: Bound queue 2 to cpu 2 [...] igb2: Bound queue 3 to cpu 3 [...] pcib4: <ACPI PCI-PCI bridge> at device 1.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.21> port 0x2000-0x201f mem 0x80500000-0x8051ffff,0x80520000-0x80523fff at device 0.0 on pci4 [...] igb3: Using MSIX interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: Bound queue 0 to cpu 4 [...] igb3: Bound queue 1 to cpu 5 [...] igb3: Bound queue 2 to cpu 6 [...] igb3: Bound queue 3 to cpu 7 [...] pcib5: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <unknown> at device 0.0 (no driver attached) [...] pci5: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x80200000-0x802fffff at device 0.3 on pci5 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pci6: <unknown> at device 0.0 (no driver attached) [...] pci6: <encrypt/decrypt> at device 0.1 (no driver attached) [...] ahci0: <AMD KERNCZ AHCI SATA controller> mem 0x8018e000-0x8018efff at device 0.2 on pci6 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] hdac0: <AMD X370 HDA Controller> mem 0x80180000-0x80187fff at device 0.3 on pci6 [...] ax0: <AMD 10 Gigabit Ethernet Driver> mem 0x80160000-0x8017ffff,0x80140000-0x8015ffff,0x80188000-0x80189fff at device 0.4 on pci6 [...] ax0: Using 2048 TX descriptors and 2048 RX descriptors [...] ax0: Using 8 RX queues 8 TX queues [...] ax0: Using MSI-X interrupts with 12 vectors [...] ax0: Ethernet address: ... [...] ax0: xgbe_exit: exit error -16 [...] ax0: axgbe_if_attach_post: exit error -16 [...] ax0: error flushing TX queues [...] ax0: xgbe_phy_sfp_signals: port_sfp_inputs: 0xb [...] ax0: xgbe_phy_sfp_detect: mod absent [...] ax0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ax1: <AMD 10 Gigabit Ethernet Driver> mem 0x80120000-0x8013ffff,0x80100000-0x8011ffff,0x8018a000-0x8018bfff at device 0.5 on pci6 [...] ax1: Using 2048 TX descriptors and 2048 RX descriptors [...] ax1: Using 8 RX queues 8 TX queues [...] ax1: Using MSI-X interrupts with 12 vectors [...] ax1: Ethernet address: ... [...] ax1: xgbe_exit: exit error -16 [...] ax1: axgbe_if_attach_post: exit error -16 [...] ax1: error flushing TX queues [...] ax1: xgbe_phy_sfp_signals: port_sfp_inputs: 0x9 [...] ax1: xgbe_phy_sfp_detect: mod absent [...] ax1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] uart0: <8250 or 16450 or compatible> port 0x3f8-0x3ff irq 3 flags 0x10 on acpi0 [...] uart0: console (4430,n,8,1) [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <TS256GMTS952T2 02J0T4GB> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Novatel Wireless MiFi 8800L> at usbus0 [...] ugen0.3: <CPS CST135XLU> at usbus0 [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] urndis0 on uhub0 [...] urndis0: <RNDIS Communications Control> on usbus0 [...] ue0: <USB Ethernet> on urndis0 [...] ue0: Ethernet address: ... [...] uhid0 on uhub0 [...] uhid0: <HID Interface> on usbus0 [...] lo0: link state changed to UP [...] amdsmn0: <AMD Family 17h System Management Network> on hostb0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 [...] igb0: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb2: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled