[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p7 stable/23.7-n254871-d5ec322cffc SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (3300.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ffaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x2942607<FSGSBASE,TSCADJ,SGX,ERMS,INVPCID,NFPUSG,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8158912512 (7780 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] Event timer "HPET5" frequency 24000000 Hz quality 440 [...] Event timer "HPET6" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdfc10000-0xdfc1ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdfc28000-0xdfc29fff,0xdfc2c000-0xdfc2c0ff,0xdfc2b000-0xdfc2b7ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xdfb00000-0xdfb1ffff,0xdfb20000-0xdfb23fff irq 16 at device 0.0 on pci2 [...] igb0: NVM V0.6 imgtype2 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xdfa00000-0xdfa1ffff,0xdfa20000-0xdfa23fff irq 17 at device 0.0 on pci3 [...] igb1: NVM V0.6 imgtype2 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 18 at device 0.0 on pci4 [...] igb2: NVM V0.6 imgtype2 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xdf800000-0xdf81ffff,0xdf820000-0xdf823fff irq 19 at device 0.0 on pci5 [...] igb3: NVM V0.6 imgtype2 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igb4: <Intel(R) I211 (Copper)> port 0xa000-0xa01f mem 0xdf700000-0xdf71ffff,0xdf720000-0xdf723fff irq 16 at device 0.0 on pci6 [...] igb4: NVM V0.6 imgtype2 [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 2 RX queues 2 TX queues [...] igb4: Using MSI-X interrupts with 3 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib7: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 [...] pci8: <ACPI PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> at device 1.0 on pci8 [...] pci9: <PCI bus> on pcib9 [...] igb5: <Intel(R) I211 (Copper)> port 0x9000-0x901f mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 18 at device 0.0 on pci9 [...] igb5: NVM V0.6 imgtype2 [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 2 RX queues 2 TX queues [...] igb5: Using MSI-X interrupts with 3 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib10: <PCI-PCI bridge> at device 2.0 on pci8 [...] pci10: <PCI bus> on pcib10 [...] igb6: <Intel(R) I210 (Fiber)> port 0x8000-0x801f mem 0xdf400000-0xdf4fffff,0xdf500000-0xdf503fff irq 19 at device 0.0 on pci10 [...] igb6: EEPROM V3.25-0 eTrack 0x800005d5 [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 2 RX queues 2 TX queues [...] igb6: Using MSI-X interrupts with 3 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib11: <PCI-PCI bridge> at device 3.0 on pci8 [...] pci11: <PCI bus> on pcib11 [...] igb7: <Intel(R) I210 (Fiber)> port 0x7000-0x701f mem 0xdf100000-0xdf1fffff,0xdf200000-0xdf203fff irq 16 at device 0.0 on pci11 [...] igb7: EEPROM V3.25-0 eTrack 0x800005d5 [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 2 RX queues 2 TX queues [...] igb7: Using MSI-X interrupts with 3 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 2/1024, RX 2/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0xdfc20000-0xdfc23fff,0xdfc00000-0xdfc0ffff irq 16 at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] Timecounter "TSC-low" frequency 1655996638 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Skylake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub0: 20 ports with 20 removable, self powered