[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p6 stable/23.1-n250396-d34cd428508 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: AMD GX-415GA SOC with Radeon(tm) HD Graphics (1497.25-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x700f01 Family=0x16 Model=0x0 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I> [...] Structured Extended Features=0x8<BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] AMD Extended Feature Extensions ID EBX=0x1000<IBPB> [...] SVM: NP,NRIP,AFlush,DAssist,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7942852608 (7574 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <FTS D3313-A1> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 2 1 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <FTS D3313-A1> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfeb00000-0xfeb3ffff irq 44 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI Kabini HDA Controller> mem 0xfeb64000-0xfeb67fff irq 45 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 28 at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xfeaa0000-0xfeabffff,0xfea80000-0xfea9ffff irq 24 at device 0.0 on pci1 [...] em0: EEPROM V5.11-2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xfea40000-0xfea5ffff,0xfea20000-0xfea3ffff irq 25 at device 0.1 on pci1 [...] em1: EEPROM V5.11-2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 29 at device 2.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe900000-0xfe900fff,0xd0800000-0xd0803fff irq 28 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb68000-0xfeb69fff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb6e000-0xfeb6e3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfeb6d000-0xfeb6dfff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb6c000-0xfeb6c0ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfeb6b000-0xfeb6bfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb6a000-0xfeb6a0ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfeb60000-0xfeb63fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC" frequency 1497191457 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC671 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC671 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC671 (Analog)> at nid 23 and 24 on hdaa1 [...] pcm3: <Realtek ALC671 (Front Analog)> at nid 20 and 25 on hdaa1 [...] pcm4: <Realtek ALC671 (Rear Analog Line-out)> at nid 33 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen4.1: <AMD EHCI root HUB> at usbus4 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub0 on usbus4 [...] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen2.1: <AMD EHCI root HUB> at usbus2 [...] ugen1.1: <AMD OHCI root HUB> at usbus1 [...] uhub1 on usbus0 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus1 [...] uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub3 on usbus2 [...] uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ugen3.1: <AMD OHCI root HUB> at usbus3 [...] uhub4 on usbus3 [...] uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <BT58SSD08M HC1A252P> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 4096bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] Root mount waiting for: usbus2 usbus4 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] ugen1.2: <1 650> at usbus1 [...] em0: link state changed to UP [...] re0: link state changed to UP [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5 [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] vlan0: changing name to 'vlan01' [...] re0: link state changed to DOWN [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] em0: link state changed to UP [...] vlan01: link state changed to UP [...] re0: link state changed to UP [...] 212.176619 [ 851] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: permanently promiscuous mode enabled [...] 212.410696 [ 851] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to DOWN [...] vlan01: link state changed to DOWN [...] 212.881134 [ 851] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em0: link state changed to UP [...] vlan01: link state changed to UP [...] em0: permanently promiscuous mode disabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em0 [...] ng0: changing name to 'pppoe0' [...] em0: link state changed to DOWN [...] vlan01: link state changed to DOWN [...] em0: link state changed to UP [...] vlan01: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 1 0 0 done [...] All buffers synced. [...] Uptime: 6d2h33m32s [...] uhub0: detached [...] uhub4: detached [...] uhub3: detached [...] uhub2: detached [...] uhub1: detached [...] re0: link state changed to DOWN [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250403-22166c9a507 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: AMD GX-415GA SOC with Radeon(tm) HD Graphics (1497.24-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x700f01 Family=0x16 Model=0x0 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I> [...] Structured Extended Features=0x8<BMI1> [...] XSAVE Features=0x1<XSAVEOPT> [...] AMD Extended Feature Extensions ID EBX=0x1000<IBPB> [...] SVM: NP,NRIP,AFlush,DAssist,NAsids=8 [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7942852608 (7574 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <FTS D3313-A1> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 1 2 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.8, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <FTS D3313-A1> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xfeb00000-0xfeb3ffff irq 44 at device 1.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <ATI Kabini HDA Controller> mem 0xfeb64000-0xfeb67fff irq 45 at device 1.1 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 28 at device 2.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xfeaa0000-0xfeabffff,0xfea80000-0xfea9ffff irq 24 at device 0.0 on pci1 [...] em0: EEPROM V5.11-2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xfea40000-0xfea5ffff,0xfea20000-0xfea3ffff irq 25 at device 0.1 on pci1 [...] em1: EEPROM V5.11-2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib2: <ACPI PCI-PCI bridge> irq 29 at device 2.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe900000-0xfe900fff,0xd0800000-0xd0803fff irq 28 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb68000-0xfeb69fff irq 18 at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb6e000-0xfeb6e3ff irq 19 at device 17.0 on pci0 [...] ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ohci0: <AMD FCH USB Controller> mem 0xfeb6d000-0xfeb6dfff irq 18 at device 18.0 on pci0 [...] usbus1 on ohci0 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb6c000-0xfeb6c0ff irq 17 at device 18.2 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] ohci1: <AMD FCH USB Controller> mem 0xfeb6b000-0xfeb6bfff irq 18 at device 19.0 on pci0 [...] usbus3 on ohci1 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb6a000-0xfeb6a0ff irq 17 at device 19.2 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] hdac1: <AMD Hudson-2 HDA Controller> mem 0xfeb60000-0xfeb63fff irq 16 at device 20.2 on pci0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC" frequency 1497192086 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] hdacc1: <Realtek ALC671 HDA CODEC> at cad 2 on hdac1 [...] hdaa1: <Realtek ALC671 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC671 (Analog)> at nid 23 and 24 on hdaa1 [...] pcm3: <Realtek ALC671 (Front Analog)> at nid 20 and 25 on hdaa1 [...] pcm4: <Realtek ALC671 (Rear Analog Line-out)> at nid 33 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen3.1: <AMD OHCI root HUB> at usbus3 [...] ugen4.1: <AMD EHCI root HUB> at usbus4 [...] uhub0 on usbus3 [...] uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] uhub1 on usbus4 [...] uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] ugen1.1: <AMD OHCI root HUB> at usbus1 [...] uhub2 on usbus0 [...] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub3 on usbus1 [...] uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <AMD EHCI root HUB> at usbus2 [...] uhub4 on usbus2 [...] uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <BT58SSD08M HC1A252P> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 4096bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] Root mount waiting for: usbus2 usbus4 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub1: 4 ports with 4 removable, self powered [...] ugen1.2: <1 650> at usbus1