[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.3-STABLE plus-RELENG_22_05-n202700-3ddaea61055 pfSense amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) J4005 CPU @ 2.00GHz (1996.87-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2<IBRS_ALL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8049922048 (7677 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1996873720 Hz quality 1000 [...] random: entropy device external interface [...] ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. [...] ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. [...] module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073eb00, 0) error 1 [...] ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. [...] ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. [...] module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ebb0, 0) error 1 [...] ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. [...] ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. [...] module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073ec60, 0) error 1 [...] iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. [...] iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. [...] module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807667d0, 0) error 1 [...] iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. [...] iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. [...] module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80766880, 0) error 1 [...] iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. [...] iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. [...] module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80766930, 0) error 1 [...] wlan: mac acl policy registered [...] WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. [...] WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. [...] kbd1 at kbdmux0 [...] [ath_hal] loaded [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] 000.000054 [4337] netmap_init netmap: loaded module [...] mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Event timer "HPET5" frequency 19200000 Hz quality 440 [...] Event timer "HPET6" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1410000-0xa1411fff,0xa1414000-0xa14140ff,0xa1413000-0xa14137ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xa1180000-0xa11fffff,0xa120c000-0xa120ffff at device 0.0 on pci1 [...] igb0: EEPROM V3.19-0 eTrack 0x00013cbf [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xa1100000-0xa117ffff,0xa1208000-0xa120bfff at device 0.1 on pci1 [...] igb1: EEPROM V3.19-0 eTrack 0x00013cbf [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xa1080000-0xa10fffff,0xa1204000-0xa1207fff at device 0.2 on pci1 [...] igb2: EEPROM V3.19-0 eTrack 0x00013cbf [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xa1000000-0xa107ffff,0xa1200000-0xa1203fff at device 0.3 on pci1 [...] igb3: EEPROM V3.19-0 eTrack 0x00013cbf [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1304000-0xa1304fff,0xa1300000-0xa1303fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1f3300001400 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1f3300001400 [...] device_attach: est1 attach returned 6 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] Trying to mount root from zfs:pfSense/ROOT/default []... [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] Root mount waiting for: CAM usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: CAM usbus0 [...] ugen0.2: <vendor 0x214b USB2.0 HUB> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: CAM usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x13ba Barcode Reader> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: CAM usbus0 [...] ugen0.4: <vendor 0x413d product 0x2107> at usbus0 [...] ukbd1 on uhub1 [...] ukbd1: <vendor 0x413d product 0x2107, class 0/0, rev 1.10/0.00, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] uhid0 on uhub1 [...] uhid0: <vendor 0x413d product 0x2107, class 0/0, rev 1.10/0.00, addr 3> on usbus0 [...] uhid1 on uhub1 [...] uhid1: <vendor 0x413d product 0x2107, class 0/0, rev 1.10/0.00, addr 3> on usbus0 [...] Root mount waiting for: CAM usbus0 [...] Root mount waiting for: CAM usbus0 [...] ugen0.5: <Sunplus Innovation Technology USB to Serial-ATA bridge> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk Only Interface> on usbus0 [...] ugen0.6: <STMicroelectronics STM32 Virtual ComPort> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <STMicroelectronics STM32 Virtual ComPort, class 2/2, rev 2.00/2.00, addr 5> on usbus0 [...] umodem0: data interface 1, has no CM over data, has no break [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG HM320II 2AC101C4> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG HM321HI 2AJ10001> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 305245MB (625142448 512 byte sectors) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Netac SS D 128GB 0200> Fixed Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 122104MB (250069680 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] warning: total configured swap (8388608 pages) exceeds maximum recommended amount (7893336 pages). [...] warning: increase kern.maxswzone or reduce amount of swap. [...] CPU: Intel(R) Celeron(R) J4005 CPU @ 2.00GHz (1996.87-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0xc6a<IBRS_ALL,SKIP_L1DFL_VME> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] ums0 on uhub1 [...] ums0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 2> on usbus0 [...] ums0: 5 buttons and [XYZ] coordinates ID=1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1f3300001400 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1f3300001400 [...] device_attach: est1 attach returned 6 [...] lo0: link state changed to UP [...] vlan0: changing name to 'igb1.79' [...] ng0: changing name to 'pppoe0' [...] igb1: link state changed to UP [...] igb1.79: link state changed to UP [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] pflog0: promiscuous mode enabled [...] re0: link state changed to UP [...] igb0: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb1: promiscuous mode enabled [...] igb1.79: promiscuous mode enabled [...] pppoe0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb0 [...] pflog0: promiscuous mode disabled [...] pppoe0: promiscuous mode disabled [...] igb0: promiscuous mode disabled [...] igb2: promiscuous mode disabled [...] igb1: promiscuous mode disabled [...] igb1.79: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 1d10h22m13s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p2 stable/22.7-n250239-dde4437e8f2 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Celeron(R) J4005 CPU @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x706a1 Family=0x6 Model=0x7a Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC> [...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2<IBRS_ALL> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8071184384 (7697 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL GLK-SOC > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x79946000-0x7994601e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] Event timer "HPET5" frequency 19200000 Hz quality 440 [...] Event timer "HPET6" frequency 19200000 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pcib0: Length mismatch for 3 range: 1 vs 1000000010000 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 15.0 (no driver attached) [...] ahci0: <Intel Gemini Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xa1410000-0xa1411fff,0xa1414000-0xa14140ff,0xa1413000-0xa14137ff at device 18.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) I340 82580 (Copper)> mem 0xa1180000-0xa11fffff,0xa120c000-0xa120ffff at device 0.0 on pci1 [...] igb0: EEPROM V3.19-0 eTrack 0x00013cbf [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) I340 82580 (Copper)> mem 0xa1100000-0xa117ffff,0xa1208000-0xa120bfff at device 0.1 on pci1 [...] igb1: EEPROM V3.19-0 eTrack 0x00013cbf [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) I340 82580 (Copper)> mem 0xa1080000-0xa10fffff,0xa1204000-0xa1207fff at device 0.2 on pci1 [...] igb2: EEPROM V3.19-0 eTrack 0x00013cbf [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) I340 82580 (Copper)> mem 0xa1000000-0xa107ffff,0xa1200000-0xa1203fff at device 0.3 on pci1 [...] igb3: EEPROM V3.19-0 eTrack 0x00013cbf [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xa1304000-0xa1304fff,0xa1300000-0xa1303fff at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1400000-0xa140ffff irq 17 at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1f3300001400 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1f3300001400 [...] device_attach: est1 attach returned 6 [...] Timecounter "TSC" frequency 1996800157 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SAMSUNG HM320II 2AC101C4> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <SAMSUNG HM321HI 2AJ10001> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 305245MB (625142448 512 byte sectors) [...] uhub0: 16 ports with 16 removable, self powered [...] ugen0.2: <vendor 0x214b USB2.0 HUB> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.3: <vendor 0x13ba Barcode Reader> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <vendor 0x413d product 0x2107> at usbus0 [...] ukbd1 on uhub1 [...] ukbd1: <vendor 0x413d product 0x2107, class 0/0, rev 1.10/0.00, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Sunplus Innovation Technology USB to Serial-ATA bridge (0x1bcf:0x0c31) [...] ugen0.5: <Sunplus Innovation Technology USB to Serial-ATA bridge> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk Only Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Netac SS D 128GB 0200> Fixed Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 122104MB (250069680 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen0.6: <STMicroelectronics STM32 Virtual ComPort> at usbus0 [...] umodem0 on uhub0 [...] umodem0: <STMicroelectronics STM32 Virtual ComPort, class 2/2, rev 2.00/2.00, addr 5> on usbus0 [...] umodem0: data interface 1, has no CM over data, has no break