[...] xhci0: <Intel Denverton USB 3.0 controller> mem 0xdf600000-0xdf60ffff at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ix0: <Intel(R) X553 N (SFP+)> mem 0xdcc00000-0xdcdfffff,0xdce04000-0xdce07fff at device 0.0 on pci11 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: nvm 2.10.0 eTrack 0x80000bd7 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) X553 N (SFP+)> mem 0xdca00000-0xdcbfffff,0xdce00000-0xdce03fff at device 0.1 on pci11 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: nvm 2.10.0 eTrack 0x80000bd7 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib12: <ACPI PCI-PCI bridge> at device 23.0 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] ix2: <Intel(R) X553 N (SFP+)> mem 0xdc600000-0xdc7fffff,0xdc804000-0xdc807fff at device 0.0 on pci12 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 8 RX queues 8 TX queues [...] ix2: Using MSI-X interrupts with 9 vectors [...] ix2: allocated for 8 queues [...] ix2: allocated for 8 rx queues [...] ix2: Ethernet address: ... [...] ix2: nvm 2.10.0 eTrack 0x80000c01 [...] ix2: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix3: <Intel(R) X553 N (SFP+)> mem 0xdc400000-0xdc5fffff,0xdc800000-0xdc803fff at device 0.1 on pci12 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 8 RX queues 8 TX queues [...] ix3: Using MSI-X interrupts with 9 vectors [...] ix3: allocated for 8 queues [...] ix3: allocated for 8 rx queues [...] ix3: Ethernet address: ... [...] ix3: nvm 2.10.0 eTrack 0x80000c01 [...] ix3: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pci0: <simple comms> at device 24.0 (no driver attached) [...] ns8250: UART FCR is broken [...] uart2: <Intel Denverton UART> port 0xe060-0xe067 mem 0xdf619000-0xdf6190ff at device 26.0 on pci0 [...] uart2: Using 1 MSI message [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] cpufreq1: <CPU frequency control> on cpu1 [...] cpufreq2: <CPU frequency control> on cpu2 [...] cpufreq3: <CPU frequency control> on cpu3 [...] cpufreq4: <CPU frequency control> on cpu4 [...] cpufreq5: <CPU frequency control> on cpu5 [...] cpufreq6: <CPU frequency control> on cpu6 [...] cpufreq7: <CPU frequency control> on cpu7 [...] Timecounter "TSC-low" frequency 1200000007 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme1: Allocated 16MB host memory buffer [...] nda0 at nvme0 bus 0 scbus8 target 0 lun 1 [...] nda0: <PSE12F-M2280-512G-V01 ECPM13.0 512220414001169> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] nda1 at nvme1 bus 0 scbus9 target 0 lun 1 [...] nda1: <TEAM TM8FP6512G SN10660 TPBF2401120080109495> [...] nda1: Serial Number... [...] nda1: nvme version 1.4 [...] nda1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus7 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] GEOM_MIRROR: Device mirror/swap launched (2/2). [...] uhub0: 8 ports with 8 removable, self powered [...] ugen0.2: <Raritan DCIM-USBG2> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Raritan DCIM-USBG2, class 0/0, rev 1.10/0.00, addr 1> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.4: <Samsung Flash Drive FIT> at usbus0 [...] umass0 on uhub0 [...] umass0: <Samsung Flash Drive FIT, class 0/0, rev 3.10/11.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:10:0: Attached to scbus10 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] da0 at umass-sim0 bus 0 scbus10 target 0 lun 0 [...] da0: <Samsung Flash Drive FIT 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 244752MB (501253132 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] pid 34 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 56s [...] GEOM_MIRROR: Device swap: provider destroyed. [...] GEOM_MIRROR: Device swap destroyed. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] VT(efifb): resolution 800x600 [...] CPU microcode: updated from 0x24 to 0x3e [...] CPU: Intel(R) Atom(TM) CPU C3758R @ 2.40GHz (2400.23-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x14000c69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33281937408 (31740 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <INTEL TIANO > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 7 6 1 3 4 5 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7f302000-0x7f302017 [...] smbios0: Entry point: v3 (64-bit), Version: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <processor> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> mem 0xdf5e0000-0xdf5fffff at device 9.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] nvme0: <Generic NVMe Device> mem 0xdf300000-0xdf303fff at device 0.0 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> mem 0xdf5c0000-0xdf5dffff at device 10.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] nvme1: <Generic NVMe Device> mem 0xdf200000-0xdf203fff at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> mem 0xdf5a0000-0xdf5bffff at device 11.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xdee00000-0xdeefffff,0xdef00000-0xdef03fff at device 0.0 on pci4 [...] igc0: EEPROM V1.57-0 eTrack 0x80000185 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> mem 0xdf580000-0xdf59ffff at device 12.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xdeb00000-0xdebfffff,0xdec00000-0xdec03fff at device 0.0 on pci5 [...] igc1: EEPROM V1.57-0 eTrack 0x80000185 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> mem 0xdf560000-0xdf57ffff at device 14.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xde800000-0xde8fffff,0xde900000-0xde903fff at device 0.0 on pci6 [...] igc2: EEPROM V1.57-0 eTrack 0x80000185 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> mem 0xdf540000-0xdf55ffff at device 15.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xde500000-0xde5fffff,0xde600000-0xde603fff at device 0.0 on pci7 [...] igc3: EEPROM V1.57-0 eTrack 0x80000185 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <ACPI PCI-PCI bridge> mem 0xdf520000-0xdf53ffff at device 16.0 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] igc4: <Intel(R) Ethernet Controller I225-V> mem 0xde200000-0xde2fffff,0xde300000-0xde303fff at device 0.0 on pci8 [...] igc4: EEPROM V1.57-0 eTrack 0x80000185 [...] igc4: Using 1024 TX descriptors and 1024 RX descriptors [...] igc4: Using 4 RX queues 4 TX queues [...] igc4: Using MSI-X interrupts with 5 vectors [...] igc4: Ethernet address: ... [...] igc4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib9: <ACPI PCI-PCI bridge> mem 0xdf500000-0xdf51ffff at device 17.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci9 [...] pci10: <ACPI PCI bus> on pcib10 [...] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xdd000000-0xddffffff,0xde000000-0xde01ffff at device 0.0 on pci10 [...] vgapci0: Boot video device [...] ahci0: <Intel Denverton AHCI SATA controller> port 0xe0a0-0xe0a7,0xe090-0xe093,0xe040-0xe05f mem 0xdf616000-0xdf617fff,0xdf61e000-0xdf61e0ff,0xdf61d000-0xdf61d7ff at device 19.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] ahci1: <Intel Denverton AHCI SATA controller> port 0xe080-0xe087,0xe070-0xe073,0xe020-0xe03f mem 0xdf614000-0xdf615fff,0xdf61c000-0xdf61c0ff,0xdf61b000-0xdf61b7ff at device 20.0 on pci0 [...] ahci1: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] ahcich9: <AHCI channel> at channel 1 on ahci1 [...] ahcich11: <AHCI channel> at channel 3 on ahci1 [...] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] xhci0: <Intel Denverton USB 3.0 controller> mem 0xdf600000-0xdf60ffff at device 21.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] ix0: <Intel(R) X553 N (SFP+)> mem 0xdcc00000-0xdcdfffff,0xdce04000-0xdce07fff at device 0.0 on pci11 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: nvm 2.10.0 eTrack 0x80000bd7 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) X553 N (SFP+)> mem 0xdca00000-0xdcbfffff,0xdce00000-0xdce03fff at device 0.1 on pci11 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: nvm 2.10.0 eTrack 0x80000bd7 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib12: <ACPI PCI-PCI bridge> at device 23.0 on pci0 [...] pci12: <ACPI PCI bus> on pcib12 [...] ix2: <Intel(R) X553 N (SFP+)> mem 0xdc600000-0xdc7fffff,0xdc804000-0xdc807fff at device 0.0 on pci12 [...] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] ix2: Using 8 RX queues 8 TX queues [...] ix2: Using MSI-X interrupts with 9 vectors [...] ix2: allocated for 8 queues [...] ix2: allocated for 8 rx queues [...] ix2: Ethernet address: ... [...] ix2: nvm 2.10.0 eTrack 0x80000c01 [...] ix2: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix3: <Intel(R) X553 N (SFP+)> mem 0xdc400000-0xdc5fffff,0xdc800000-0xdc803fff at device 0.1 on pci12 [...] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] ix3: Using 8 RX queues 8 TX queues [...] ix3: Using MSI-X interrupts with 9 vectors [...] ix3: allocated for 8 queues [...] ix3: allocated for 8 rx queues [...] ix3: Ethernet address: ... [...] ix3: nvm 2.10.0 eTrack 0x80000c01 [...] ix3: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pci0: <simple comms> at device 24.0 (no driver attached) [...] uart2: <Intel Denverton UART> port 0xe060-0xe067 mem 0xdf619000-0xdf6190ff at device 26.0 on pci0 [...] uart2: Using 1 MSI message [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] cpufreq0: <CPU frequency control> on cpu0 [...] cpufreq1: <CPU frequency control> on cpu1 [...] cpufreq2: <CPU frequency control> on cpu2 [...] cpufreq3: <CPU frequency control> on cpu3 [...] cpufreq4: <CPU frequency control> on cpu4 [...] cpufreq5: <CPU frequency control> on cpu5 [...] cpufreq6: <CPU frequency control> on cpu6 [...] cpufreq7: <CPU frequency control> on cpu7 [...] Timecounter "TSC-low" frequency 1199999921 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme1: Allocated 16MB host memory buffer [...] nda0 at nvme0 bus 0 scbus8 target 0 lun 1 [...] nda0: <PSE12F-M2280-512G-V01 ECPM13.0 512220414001169> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] nda1 at nvme1 bus 0 scbus9 target 0 lun 1 [...] nda1: <TEAM TM8FP6512G SN10660 TPBF2401120080109495> [...] nda1: Serial Number... [...] nda1: nvme version 1.4 [...] nda1: 488386MB (1000215216 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses1 at ahciem1 bus 0 scbus7 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] GEOM_MIRROR: Device mirror/swap launched (2/2). [...] uhub0: 8 ports with 8 removable, self powered [...] ugen0.2: <Raritan DCIM-USBG2> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Raritan DCIM-USBG2, class 0/0, rev 1.10/0.00, addr 1> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ugen0.4: <Samsung Flash Drive FIT> at usbus0 [...] umass0 on uhub0 [...] umass0: <Samsung Flash Drive FIT, class 0/0, rev 3.10/11.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:10:0: Attached to scbus10 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] da0 at umass-sim0 bus 0 scbus10 target 0 lun 0 [...] da0: <Samsung Flash Drive FIT 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 244752MB (501253132 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] pid 34 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] igc0: link state changed to UP [...] igc2: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 4m29s [...] GEOM_MIRROR: Device swap: provider destroyed. [...] GEOM_MIRROR: Device swap destroyed. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 800x600 [...] [1] CPU microcode: updated from 0x24 to 0x3e [...] [1] CPU: Intel(R) Atom(TM) CPU C3758R @ 2.40GHz (2400.23-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] [1] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x101<LAHF,Prefetch> [...] [1] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> [...] [1] Structured Extended Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x14000c69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 34359738368 (32768 MB) [...] [1] avail memory = 33281941504 (31740 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <INTEL TIANO > [...] [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 8 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] Launching APs: 1 6 7 4 2 5 3 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x7f302000-0x7f302017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.0 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] [1] Event timer "HPET" frequency 24000000 Hz quality 550 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] pci1: <processor> at device 0.0 (no driver attached) [...] [1] pcib2: <ACPI PCI-PCI bridge> mem 0xdf5e0000-0xdf5fffff at device 9.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] nvme0: <Generic NVMe Device> mem 0xdf300000-0xdf303fff at device 0.0 on pci2 [...] [1] pcib3: <ACPI PCI-PCI bridge> mem 0xdf5c0000-0xdf5dffff at device 10.0 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] nvme1: <Generic NVMe Device> mem 0xdf200000-0xdf203fff at device 0.0 on pci3 [...] [1] pcib4: <ACPI PCI-PCI bridge> mem 0xdf5a0000-0xdf5bffff at device 11.0 on pci0 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xdee00000-0xdeefffff,0xdef00000-0xdef03fff at device 0.0 on pci4 [...] [1] igc0: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib5: <ACPI PCI-PCI bridge> mem 0xdf580000-0xdf59ffff at device 12.0 on pci0 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xdeb00000-0xdebfffff,0xdec00000-0xdec03fff at device 0.0 on pci5 [...] [1] igc1: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc1: Using 4 RX queues 4 TX queues [...] [1] igc1: Using MSI-X interrupts with 5 vectors [...] [1] igc1: Ethernet address: ... [...] [1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib6: <ACPI PCI-PCI bridge> mem 0xdf560000-0xdf57ffff at device 14.0 on pci0 [...] [1] pci6: <ACPI PCI bus> on pcib6 [...] [1] igc2: <Intel(R) Ethernet Controller I225-V> mem 0xde800000-0xde8fffff,0xde900000-0xde903fff at device 0.0 on pci6 [...] [1] igc2: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc2: Using 4 RX queues 4 TX queues [...] [1] igc2: Using MSI-X interrupts with 5 vectors [...] [1] igc2: Ethernet address: ... [...] [1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib7: <ACPI PCI-PCI bridge> mem 0xdf540000-0xdf55ffff at device 15.0 on pci0 [...] [1] pci7: <ACPI PCI bus> on pcib7 [...] [1] igc3: <Intel(R) Ethernet Controller I225-V> mem 0xde500000-0xde5fffff,0xde600000-0xde603fff at device 0.0 on pci7 [...] [1] igc3: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc3: Using 4 RX queues 4 TX queues [...] [1] igc3: Using MSI-X interrupts with 5 vectors [...] [1] igc3: Ethernet address: ... [...] [1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib8: <ACPI PCI-PCI bridge> mem 0xdf520000-0xdf53ffff at device 16.0 on pci0 [...] [1] pci8: <ACPI PCI bus> on pcib8 [...] [1] igc4: <Intel(R) Ethernet Controller I225-V> mem 0xde200000-0xde2fffff,0xde300000-0xde303fff at device 0.0 on pci8 [...] [1] igc4: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc4: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc4: Using 4 RX queues 4 TX queues [...] [1] igc4: Using MSI-X interrupts with 5 vectors [...] [1] igc4: Ethernet address: ... [...] [1] igc4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib9: <ACPI PCI-PCI bridge> mem 0xdf500000-0xdf51ffff at device 17.0 on pci0 [...] [1] pci9: <ACPI PCI bus> on pcib9 [...] [1] pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci9 [...] [1] pci10: <ACPI PCI bus> on pcib10 [...] [1] vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xdd000000-0xddffffff,0xde000000-0xde01ffff at device 0.0 on pci10 [...] [1] vgapci0: Boot video device [...] [1] ahci0: <Intel Denverton AHCI SATA controller> port 0xe0a0-0xe0a7,0xe090-0xe093,0xe040-0xe05f mem 0xdf616000-0xdf617fff,0xdf61e000-0xdf61e0ff,0xdf61d000-0xdf61d7ff at device 19.0 on pci0 [...] [1] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier supported [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] [1] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] [1] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] ahci1: <Intel Denverton AHCI SATA controller> port 0xe080-0xe087,0xe070-0xe073,0xe020-0xe03f mem 0xdf614000-0xdf615fff,0xdf61c000-0xdf61c0ff,0xdf61b000-0xdf61b7ff at device 20.0 on pci0 [...] [1] ahci1: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported [...] [1] ahcich9: <AHCI channel> at channel 1 on ahci1 [...] [1] ahcich11: <AHCI channel> at channel 3 on ahci1 [...] [1] ahciem1: <AHCI enclosure management bridge> on ahci1 [...] [1] xhci0: <Intel Denverton USB 3.0 controller> mem 0xdf600000-0xdf60ffff at device 21.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0 [...] [1] pci11: <ACPI PCI bus> on pcib11 [...] [1] ix0: <Intel(R) X553 N (SFP+)> mem 0xdcc00000-0xdcdfffff,0xdce04000-0xdce07fff at device 0.0 on pci11 [...] [1] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] [1] ix0: Using 8 RX queues 8 TX queues [...] [1] ix0: Using MSI-X interrupts with 9 vectors [...] [1] ix0: allocated for 8 queues [...] [1] ix0: allocated for 8 rx queues [...] [1] ix0: Ethernet address: ... [...] [1] ix0: nvm 2.10.0 eTrack 0x80000bd7 [...] [1] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] [1] ix1: <Intel(R) X553 N (SFP+)> mem 0xdca00000-0xdcbfffff,0xdce00000-0xdce03fff at device 0.1 on pci11 [...] [1] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] [1] ix1: Using 8 RX queues 8 TX queues [...] [1] ix1: Using MSI-X interrupts with 9 vectors [...] [1] ix1: allocated for 8 queues [...] [1] ix1: allocated for 8 rx queues [...] [1] ix1: Ethernet address: ... [...] [1] ix1: nvm 2.10.0 eTrack 0x80000bd7 [...] [1] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] [1] pcib12: <ACPI PCI-PCI bridge> at device 23.0 on pci0 [...] [1] pci12: <ACPI PCI bus> on pcib12 [...] [1] ix2: <Intel(R) X553 N (SFP+)> mem 0xdc600000-0xdc7fffff,0xdc804000-0xdc807fff at device 0.0 on pci12 [...] [1] ix2: Using 2048 TX descriptors and 2048 RX descriptors [...] [1] ix2: Using 8 RX queues 8 TX queues [...] [1] ix2: Using MSI-X interrupts with 9 vectors [...] [1] ix2: allocated for 8 queues [...] [1] ix2: allocated for 8 rx queues [...] [1] ix2: Ethernet address: ... [...] [1] ix2: nvm 2.10.0 eTrack 0x80000c01 [...] [1] ix2: netmap queues/slots: TX 8/2048, RX 8/2048 [...] [1] ix3: <Intel(R) X553 N (SFP+)> mem 0xdc400000-0xdc5fffff,0xdc800000-0xdc803fff at device 0.1 on pci12 [...] [1] ix3: Using 2048 TX descriptors and 2048 RX descriptors [...] [1] ix3: Using 8 RX queues 8 TX queues [...] [1] ix3: Using MSI-X interrupts with 9 vectors [...] [1] ix3: allocated for 8 queues [...] [1] ix3: allocated for 8 rx queues [...] [1] ix3: Ethernet address: ... [...] [1] ix3: nvm 2.10.0 eTrack 0x80000c01 [...] [1] ix3: netmap queues/slots: TX 8/2048, RX 8/2048 [...] [1] pci0: <simple comms> at device 24.0 (no driver attached) [...] [1] ns8250: UART FCR is broken [...] [1] uart2: <Intel Denverton UART> port 0xe060-0xe067 mem 0xdf619000-0xdf6190ff at device 26.0 on pci0 [...] [1] uart2: Using 1 MSI message [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] pci0: <memory> at device 31.2 (no driver attached) [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] apei0: <ACPI Platform Error Interface> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] cpufreq4: <CPU frequency control> on cpu4 [...] [1] cpufreq5: <CPU frequency control> on cpu5 [...] [1] cpufreq6: <CPU frequency control> on cpu6 [...] [1] cpufreq7: <CPU frequency control> on cpu7 [...] [1] Timecounter "TSC-low" frequency 1200000020 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] uhub0 on usbus0 [...] [2] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [3] nvme1: Allocated 16MB host memory buffer [...] [3] nda0 at nvme0 bus 0 scbus8 target 0 lun 1 [...] nda0: <PSE12F-M2280-512G-V01 ECPM13.0 512220414001169> [...] nda0: Serial Number... [...] [3] nda0: nvme version 1.3 [...] nda0: 488386MB (1000215216 512 byte sectors) [...] [3] nda1 at nvme1 bus 0 scbus9 target 0 lun 1 [...] nda1: <TEAM TM8FP6512G SN10660 TPBF2401120080109495> [...] nda1: Serial Number... [...] [3] nda1: nvme version 1.4 [...] nda1: 488386MB (1000215216 512 byte sectors) [...] [3] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [3] ses1 at ahciem1 bus 0 scbus7 target 0 lun 0 [...] ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses1: SEMB SES Device [...] [3] Trying to mount root from zfs:zroot/ROOT/default []... [...] [3] GEOM_MIRROR: Device mirror/swap launched (2/2). [...] [3] uhub0: 8 ports with 8 removable, self powered [...] [3] ugen0.2: <Raritan DCIM-USBG2> at usbus0 [...] [3] ukbd0 on uhub0 [...] [3] ukbd0: <Raritan DCIM-USBG2, class 0/0, rev 1.10/0.00, addr 1> on usbus0 [...] [3] kbd1 at ukbd0 [...] [4] Root mount waiting for: usbus0 [...] [4] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] [4] uhub1 on uhub0 [...] [4] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 2> on usbus0 [...] [5] uhub1: 4 ports with 4 removable, self powered [...] [5] Root mount waiting for: usbus0 [...] [5] ugen0.4: <Samsung Flash Drive FIT> at usbus0 [...] [5] umass0 on uhub0 [...] [5] umass0: <Samsung Flash Drive FIT, class 0/0, rev 3.10/11.00, addr 3> on usbus0 [...] [5] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] [5] umass0:10:0: Attached to scbus10 [...] [6] Root mount waiting for: CAM [...] [7] Root mount waiting for: CAM [...] [8] Root mount waiting for: CAM [...] [9] da0 at umass-sim0 bus 0 scbus10 target 0 lun 0 [...] da0: <Samsung Flash Drive FIT 1100> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 244752MB (501253132 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] [9] pid 34 (zpool) is attempting to use unsafe AIO requests - not logging anymore