[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p2 stable/25.7-n271638-c7adca0552b5 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(vga): resolution 640x480 [...] [1] CPU microcode: updated from 0x1d to 0x24000026 [...] [1] CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz (1996.80-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x906c0 Family=0x6 Model=0x9c Stepping=0 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] [1] AMD Features2=0x101<LAHF,Prefetch> [...] [1] Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] [1] Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B> [...] [1] Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] IA32_ARCH_CAPS=0x14020c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 8589934592 (8192 MB) [...] [1] avail memory = 7955247104 (7586 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-119 [...] [1] Launching APs: 2 1 3 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0x72c7a000-0x72c7a017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.3 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] [1] Event timer "HPET" frequency 19200000 Hz quality 550 [...] [1] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] [1] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] [1] atrtc1: <AT realtime clock> on acpi0 [...] [1] atrtc1: Warning: Couldn't map I/O. [...] [1] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] [1] vgapci0: Boot video device [...] [1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] [1] pci0: <network> at device 20.3 (no driver attached) [...] [1] pci0: <serial bus> at device 21.0 (no driver attached) [...] [1] pci0: <serial bus> at device 21.2 (no driver attached) [...] [1] pci0: <simple comms> at device 22.0 (no driver attached) [...] [1] pci0: <serial bus> at device 25.0 (no driver attached) [...] [1] pci0: <serial bus> at device 25.1 (no driver attached) [...] [1] sdhci_pci0: <Generic SD HCI> mem 0x600112d000-0x600112dfff at device 26.0 on pci0 [...] [1] sdhci_pci0: 1 slot(s) allocated [...] [1] mmc0: <MMC/SD bus> on sdhci_pci0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] re0: <Realtek PCIe 2.5GbE Family Controller> port 0x3000-0x30ff mem 0x80000000-0x8000ffff,0x80010000-0x80013fff at device 0.0 on pci1 [...] [1] re0: Using Memory Mapping! [...] [1] re0: Using 1 MSI-X message [...] [1] re0: ASPM disabled [...] [1] re0: version:1.100.00 [...] [1] re0: Ethernet address: ... [...] [1] [...] [1] This product is covered by one or more of the following patents: [...] [1] US6,570,884, US6,115,776, and US6,327,625. [...] [1] re0: Using defaults for TSO: 65518/35/2048 [...] [1] re0: Ethernet address: ... [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] igc0: <Intel(R) Ethernet Controller I225-V> mem 0x7fd00000-0x7fdfffff,0x7fe00000-0x7fe03fff at device 0.0 on pci2 [...] [1] igc0: EEPROM V1.57-0 eTrack 0x80000185 [...] [1] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] [1] igc0: Using 4 RX queues 4 TX queues [...] [1] igc0: Using MSI-X interrupts with 5 vectors [...] [1] igc0: Ethernet address: ... [...] [1] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] [1] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] nvme0: <Generic NVMe Device> mem 0x7ff00000-0x7ff03fff at device 0.0 on pci3 [...] [1] pci0: <simple comms> at device 30.0 (no driver attached) [...] [1] pci0: <serial bus> at device 30.3 (no driver attached) [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] hdac0: <Intel Jasper Lake HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] [1] pci0: <serial bus> at device 31.5 (no driver attached) [...] [1] acpi_button0: <Sleep Button> on acpi0 [...] [1] acpi_button1: <Power Button> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] uart0: console (115200,n,8,1) [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] acpi_syscontainer1: <System Container> on acpi0 [...] [1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] atrtc0: Can't map interrupt. [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] Timecounter "TSC" frequency 1996803860 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] [2] uhub0 on usbus0 [...] [2] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] mmc0: No compatible cards found on bus [...] [2] nvme0: Allocated 16MB host memory buffer [...] [2] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] [2] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] [2] pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24 on hdaa0 [...] [2] hdacc1: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0 [...] [2] hdaa1: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc1 [...] [2] pcm1: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] [2] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <NEO-J51-SSD-256GB H220907a 230507860000000499> [...] nda0: Serial Number... [...] [2] nda0: nvme version 1.4 [...] nda0: 244198MB (500118192 512 byte sectors) [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [3] uhub0: 14 ports with 14 removable, self powered [...] [3] Root mount waiting for: usbus0 [...] [3] ugen0.2: <vendor 0x8087 product 0x0026> at usbus0 [...] [3] Dual Console: Serial Primary, Video Secondary [...] [3] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore