[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p1 stable/25.7-n271606-9af17f0102ca SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 1920x1080 [...] [1] CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.44-MHz K8-class CPU) [...] [1] Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1 [...] [1] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] [1] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] [1] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] [1] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16483266560 (15719 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.1> irqs 0-23 [...] [1] ioapic1 <Version 2.1> irqs 24-55 [...] [1] Launching APs: 2 1 3 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xd913b000-0xd913b017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.2 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 450 [...] [1] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] [1] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xf0404000-0xf0404fff,0xf0400000-0xf0403fff irq 24 at device 0.0 on pci1 [...] [1] re0: Using 1 MSI-X message [...] [1] re0: Chip rev. 0x2c000000 [...] [1] re0: MAC rev. 0x00200000 [...] [1] miibus0: <MII bus> on re0 [...] [1] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re0: Using defaults for TSO: 65518/35/2048 [...] [1] re0: Ethernet address: ... [...] [1] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] xhci0: <AMD 400 Series USB 3.1 controller> mem 0xfcda0000-0xfcda7fff irq 28 at device 0.0 on pci2 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] ahci0: <AMD 400 Series AHCI SATA controller> mem 0xfcd80000-0xfcd9ffff irq 29 at device 0.1 on pci2 [...] [1] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] [1] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] pcib5: <ACPI PCI-PCI bridge> irq 29 at device 1.0 on pci3 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] pcib6: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] [1] pci6: <ACPI PCI bus> on pcib6 [...] [1] pcib7: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] [1] pci7: <ACPI PCI bus> on pcib7 [...] [1] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfcc00000-0xfcc00fff,0xf0300000-0xf0303fff irq 30 at device 0.0 on pci7 [...] [1] re1: Using 1 MSI-X message [...] [1] re1: Chip rev. 0x2c800000 [...] [1] re1: MAC rev. 0x00100000 [...] [1] miibus1: <MII bus> on re1 [...] [1] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] [1] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re1: Using defaults for TSO: 65518/35/2048 [...] [1] re1: Ethernet address: ... [...] [1] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib8: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci3 [...] [1] pci8: <ACPI PCI bus> on pcib8 [...] [1] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff irq 31 at device 0.0 on pci8 [...] [1] re2: Using 1 MSI-X message [...] [1] re2: Chip rev. 0x54000000 [...] [1] re2: MAC rev. 0x00100000 [...] [1] miibus2: <MII bus> on re2 [...] [1] rgephy2: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] [1] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re2: Using defaults for TSO: 65518/35/2048 [...] [1] re2: Ethernet address: ... [...] [1] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib9: <ACPI PCI-PCI bridge> at device 1.6 on pci0 [...] [1] pci9: <ACPI PCI bus> on pcib9 [...] [1] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff,0xfcf04000-0xfcf05fff irq 44 at device 0.0 on pci9 [...] [1] pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] [1] pci10: <ACPI PCI bus> on pcib10 [...] [1] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfca00000-0xfca7ffff irq 52 at device 0.0 on pci10 [...] [1] vgapci0: Boot video device [...] [1] hdac0: <ATI (0x15de) HDA Controller> mem 0xfca88000-0xfca8bfff irq 53 at device 0.1 on pci10 [...] [1] pci10: <encrypt/decrypt> at device 0.2 (no driver attached) [...] [1] xhci1: <AMD Raven USB 3.1 controller> mem 0xfc800000-0xfc8fffff irq 55 at device 0.3 on pci10 [...] [1] xhci1: 64 bytes context size, 64-bit DMA [...] [1] usbus1 on xhci1 [...] [1] usbus1: 5.0Gbps Super Speed USB v3.0 [...] [1] xhci2: <AMD Raven USB 3.1 controller> mem 0xfc700000-0xfc7fffff irq 52 at device 0.4 on pci10 [...] [1] xhci2: 64 bytes context size, 64-bit DMA [...] [1] usbus2 on xhci2 [...] [1] usbus2: 5.0Gbps Super Speed USB v3.0 [...] [1] hdac1: <AMD Raven HDA Controller> mem 0xfca80000-0xfca87fff irq 54 at device 0.6 on pci10 [...] [1] pcib11: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] [1] pci11: <ACPI PCI bus> on pcib11 [...] [1] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff irq 54 at device 0.0 on pci11 [...] [1] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] [1] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] [1] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] acpi_button0: <Power Button> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] Timecounter "TSC-low" frequency 1796593621 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] [1] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] [1] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] [1] uhub0 on usbus1 [...] [1] uhub1 on usbus0 [...] [1] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [1] uhub2 on usbus2 [...] [1] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] [1] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] uhub2: 2 ports with 2 removable, self powered [...] [2] nvme0: Allocated 64MB host memory buffer [...] [2] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] [2] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] [2] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] [2] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] [2] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] [2] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] [2] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] [2] pcm3: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] [2] pcm4: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] nda0 at nvme0 bus 0 scbus5 target 0 lun 1 [...] nda0: <XPG GAMMIX S5 V9002s16 2J3920196707> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] [2] nda0: 244198MB (500118192 512 byte sectors) [...] [2] ada0 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada0: <ST6000VX0023-2EF110 SC60> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] [2] uhub0: 8 ports with 8 removable, self powered [...] [3] ugen1.2: <Logitech USB Keyboard> at usbus1 [...] [3] ukbd0 on uhub0 [...] [3] ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 1> on usbus1 [...] [3] kbd2 at ukbd0 [...] [3] uhub1: 22 ports with 22 removable, self powered [...] [3] pid 30 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] [6] re0: link state changed to UP [...] [6] re1: link state changed to UP [...] [6] re2: link state changed to DOWN [...] [6] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] [6] acpi_wmi0: cannot find EC device [...] [6] acpi_wmi0: Embedded MOF found [...] [6] ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] [6] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] [6] smbus0: <System Management Bus> on intsmb0 [...] [7] uhid0 on uhub0 [...] [7] uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 1> on usbus1 [...] [8] re0: link state changed to DOWN [...] [8] re1: link state changed to DOWN [...] [10] re1: link state changed to UP [...] [10] re0: link state changed to UP [...] [15] lo0: link state changed to UP [...] [16] pflog0: permanently promiscuous mode enabled [...] [16] re0: link state changed to DOWN [...] [16] re1: link state changed to DOWN [...] [18] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [18] re0: link state changed to UP [...] [18] re1: link state changed to UP [...] [20] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [21] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [22] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [23] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [24] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [25] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [26] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [27] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [28] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [29] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [30] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [31] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [32] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [33] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [34] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [35] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [36] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [37] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [38] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [39] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [40] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [41] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [42] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [43] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [44] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [45] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [46] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [47] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [48] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [49] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [50] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [51] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [52] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [53] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [54] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [55] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [56] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [57] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [58] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [59] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [60] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [61] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [62] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [63] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [64] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [65] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [66] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [67] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [68] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [69] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [70] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [71] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [72] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [73] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [74] arp: XXX is using my IP address XXX.XXX.XXX.XXX on re0! [...] [179] ugen1.2: <Logitech USB Keyboard> at usbus1 (disconnected) [...] [179] ukbd0: at uhub0, port 3, addr 1 (disconnected) [...] [179] ukbd0: detached [...] [179] uhid0: at uhub0, port 3, addr 1 (disconnected) [...] [179] uhid0: detached [...] [826] pid 51555 (sh), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] [839] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [839] Waiting (max 60 seconds) for system process `syncer' to stop... [...] [839] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] [843] All buffers synced. [...] [843] Uptime: 14m3s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p2 stable/25.7-n271676-ab2281de1853 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 1024x768 [...] [1] CPU: AMD Ryzen 3 3200G with Radeon Vega Graphics (3593.48-MHz K8-class CPU) [...] [1] Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1 [...] [1] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] [1] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] [1] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] [1] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] [1] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] [1] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB> [...] [1] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16483258368 (15719 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <ALASKA A M I > [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.1> irqs 0-23 [...] [1] ioapic1 <Version 2.1> irqs 24-55 [...] [1] Launching APs: 2 3 1 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd1 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xd913b000-0xd913b017 [...] [1] smbios0: Entry point: v3 (64-bit), Version: 3.2 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] [1] acpi0: <ALASKA A M I > [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 450 [...] [1] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] [1] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xf0404000-0xf0404fff,0xf0400000-0xf0403fff irq 24 at device 0.0 on pci1 [...] [1] re0: Using 1 MSI-X message [...] [1] re0: Chip rev. 0x2c000000 [...] [1] re0: MAC rev. 0x00200000 [...] [1] miibus0: <MII bus> on re0 [...] [1] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] [1] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re0: Using defaults for TSO: 65518/35/2048 [...] [1] re0: Ethernet address: ... [...] [1] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] xhci0: <AMD 400 Series USB 3.1 controller> mem 0xfcda0000-0xfcda7fff irq 28 at device 0.0 on pci2 [...] [1] xhci0: 32 bytes context size, 64-bit DMA [...] [1] usbus0 on xhci0 [...] [1] usbus0: 5.0Gbps Super Speed USB v3.0 [...] [1] ahci0: <AMD 400 Series AHCI SATA controller> mem 0xfcd80000-0xfcd9ffff irq 29 at device 0.1 on pci2 [...] [1] ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] [1] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] [1] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] [1] pcib3: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci2 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] pcib4: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci3 [...] [1] pci4: <ACPI PCI bus> on pcib4 [...] [1] pcib5: <ACPI PCI-PCI bridge> irq 29 at device 1.0 on pci3 [...] [1] pci5: <ACPI PCI bus> on pcib5 [...] [1] pcib6: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci3 [...] [1] pci6: <ACPI PCI bus> on pcib6 [...] [1] pcib7: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci3 [...] [1] pci7: <ACPI PCI bus> on pcib7 [...] [1] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfcc00000-0xfcc00fff,0xf0300000-0xf0303fff irq 30 at device 0.0 on pci7 [...] [1] re1: Using 1 MSI-X message [...] [1] re1: Chip rev. 0x2c800000 [...] [1] re1: MAC rev. 0x00100000 [...] [1] miibus1: <MII bus> on re1 [...] [1] rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 [...] [1] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re1: Using defaults for TSO: 65518/35/2048 [...] [1] re1: Ethernet address: ... [...] [1] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib8: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci3 [...] [1] pci8: <ACPI PCI bus> on pcib8 [...] [1] re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff irq 31 at device 0.0 on pci8 [...] [1] re2: Using 1 MSI-X message [...] [1] re2: Chip rev. 0x54000000 [...] [1] re2: MAC rev. 0x00100000 [...] [1] miibus2: <MII bus> on re2 [...] [1] rgephy2: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus2 [...] [1] rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] [1] re2: Using defaults for TSO: 65518/35/2048 [...] [1] re2: Ethernet address: ... [...] [1] re2: netmap queues/slots: TX 1/256, RX 1/256 [...] [1] pcib9: <ACPI PCI-PCI bridge> at device 1.6 on pci0 [...] [1] pci9: <ACPI PCI bus> on pcib9 [...] [1] nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff,0xfcf04000-0xfcf05fff irq 44 at device 0.0 on pci9 [...] [1] pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] [1] pci10: <ACPI PCI bus> on pcib10 [...] [1] vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfca00000-0xfca7ffff irq 52 at device 0.0 on pci10 [...] [1] vgapci0: Boot video device [...] [1] hdac0: <ATI (0x15de) HDA Controller> mem 0xfca88000-0xfca8bfff irq 53 at device 0.1 on pci10 [...] [1] pci10: <encrypt/decrypt> at device 0.2 (no driver attached) [...] [1] xhci1: <AMD Raven USB 3.1 controller> mem 0xfc800000-0xfc8fffff irq 55 at device 0.3 on pci10 [...] [1] xhci1: 64 bytes context size, 64-bit DMA [...] [1] usbus1 on xhci1 [...] [1] usbus1: 5.0Gbps Super Speed USB v3.0 [...] [1] xhci2: <AMD Raven USB 3.1 controller> mem 0xfc700000-0xfc7fffff irq 52 at device 0.4 on pci10 [...] [1] xhci2: 64 bytes context size, 64-bit DMA [...] [1] usbus2 on xhci2 [...] [1] usbus2: 5.0Gbps Super Speed USB v3.0 [...] [1] hdac1: <AMD Raven HDA Controller> mem 0xfca80000-0xfca87fff irq 54 at device 0.6 on pci10 [...] [1] pcib11: <ACPI PCI-PCI bridge> at device 8.2 on pci0 [...] [1] pci11: <ACPI PCI bus> on pcib11 [...] [1] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff irq 54 at device 0.0 on pci11 [...] [1] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] [1] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] [1] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] acpi_button0: <Power Button> on acpi0 [...] [1] ns8250: UART FCR is broken [...] [1] ns8250: UART FCR is broken [...] [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] [1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] [1] kbd0 at atkbd0 [...] [1] atkbd0: [GIANT-LOCKED] [...] [1] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] Timecounter "TSC-low" frequency 1796627523 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen2.1: <AMD XHCI root HUB> at usbus2 [...] [1] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] [1] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] [1] uhub0 on usbus2 [...] [1] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] [1] uhub1 on usbus0 [...] [1] uhub2 on usbus1 [...] [1] uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] [1] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] nvme0: Allocated 64MB host memory buffer [...] [2] uhub0: 2 ports with 2 removable, self powered [...] [2] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] [2] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] [2] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] [2] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] [2] pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 [...] [2] hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 [...] [2] hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1 [...] [2] pcm3: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] [2] pcm4: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1 [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] nda0 at nvme0 bus 0 scbus5 target 0 lun 1 [...] nda0: <XPG GAMMIX S5 V9002s16 2J3920196707> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] [2] nda0: 244198MB (500118192 512 byte sectors) [...] [2] ada0 at ahcich4 bus 0 scbus2 target 0 lun 0 [...] ada0: <ST6000VX0023-2EF110 SC60> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] [2] uhub2: 8 ports with 8 removable, self powered [...] [3] uhub1: 22 ports with 22 removable, self powered [...] [3] pid 30 (zpool) is attempting to use unsafe AIO requests - not logging anymore