[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 e4fc5be9c3d(stable/21.7)-dirty: Thu Sep 2 10:30:36 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (3410.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7952703488 (7584 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1705042974 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xf7ca0000-0xf7cbffff,0xf7c80000-0xf7c9ffff irq 17 at device 0.0 on pci2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xf7c40000-0xf7c5ffff,0xf7c20000-0xf7c3ffff irq 18 at device 0.1 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em2: <Intel(R) 82579V> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d39000-0xf7d39fff irq 20 at device 25.0 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d38000-0xf7d383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7b00000-0xf7b07fff irq 18 at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 32-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xf7a00000-0xf7a001ff irq 19 at device 0.0 on pci5 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] ath0: <Atheros AR9485> mem 0xf7900000-0xf797ffff irq 18 at device 0.0 on pci8 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 28.8 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] xhci2: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7800000-0xf7807fff irq 19 at device 0.0 on pci9 [...] xhci2: 32 bytes context size, 32-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus3 on xhci2 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d37000-0xf7d373ff irq 23 at device 29.0 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d36000-0xf7d367ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci1 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0 [...] pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm5: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen3.1: <0x1b21 XHCI root HUB> at usbus3 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub4: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen4.2: <vendor 0x8087 product 0x0024> at usbus4 [...] uhub6 on uhub0 [...] uhub6: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus4 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em2: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em2: link state changed to UP [...] em0: link state changed to UP [...] em1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] 384.743177 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] 384.793630 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to DOWN [...] 385.238129 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to UP [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] pid 88159 (sh), jid 0, uid 0: exited on signal 11 (core dumped) [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 156 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p20-HBSD #0 4dbd2ffa241(stable/21.7)-dirty: Tue Oct 26 08:46:43 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (3410.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7952703488 (7584 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1705041164 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xf7ca0000-0xf7cbffff,0xf7c80000-0xf7c9ffff irq 17 at device 0.0 on pci2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xf7c40000-0xf7c5ffff,0xf7c20000-0xf7c3ffff irq 18 at device 0.1 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em2: <Intel(R) 82579V> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d39000-0xf7d39fff irq 20 at device 25.0 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d38000-0xf7d383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7b00000-0xf7b07fff irq 18 at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 32-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xf7a00000-0xf7a001ff irq 19 at device 0.0 on pci5 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] ath0: <Atheros AR9485> mem 0xf7900000-0xf797ffff irq 18 at device 0.0 on pci8 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 28.8 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] xhci2: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7800000-0xf7807fff irq 19 at device 0.0 on pci9 [...] xhci2: 32 bytes context size, 32-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus3 on xhci2 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d37000-0xf7d373ff irq 23 at device 29.0 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d36000-0xf7d367ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci1 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0 [...] pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm5: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] ugen3.1: <0x1b21 XHCI root HUB> at usbus3 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub4: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 4 ports with 4 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] uhub0: 8 ports with 8 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen4.2: <vendor 0x8087 product 0x0024> at usbus4 [...] uhub6 on uhub2 [...] uhub6: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus4 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub6: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em2: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em2: link state changed to UP [...] em1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to UP [...] 101.542659 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] 101.593178 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to DOWN [...] 102.032685 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] em2: link state changed to DOWN [...] em2: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on em2 [...] em1: link state changed to DOWN [...] em1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (3410.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 7952703488 (7584 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1705041478 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe020-0xe03f mem 0xf7ca0000-0xf7cbffff,0xf7c80000-0xf7c9ffff irq 17 at device 0.0 on pci2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0xe000-0xe01f mem 0xf7c40000-0xf7c5ffff,0xf7c20000-0xf7c3ffff irq 18 at device 0.1 on pci2 [...] em1: Using 1024 TX descriptors and 1024 RX descriptors [...] em1: Using an MSI interrupt [...] em1: Ethernet address: ... [...] em1: netmap queues/slots: TX 1/1024, RX 1/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em2: <Intel(R) 82579V> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d39000-0xf7d39fff irq 20 at device 25.0 on pci0 [...] em2: Using 1024 TX descriptors and 1024 RX descriptors [...] em2: Using an MSI interrupt [...] em2: Ethernet address: ... [...] em2: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d38000-0xf7d383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7b00000-0xf7b07fff irq 18 at device 0.0 on pci4 [...] xhci1: 32 bytes context size, 32-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xf7a00000-0xf7a001ff irq 19 at device 0.0 on pci5 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] ath0: <Atheros AR9485> mem 0xf7900000-0xf797ffff irq 18 at device 0.0 on pci8 [...] ar9300_flash_map: unimplemented for now [...] Restoring Cal data from DRAM [...] Restoring Cal data from EEPROM [...] Restoring Cal data from Flash [...] Restoring Cal data from Flash [...] Restoring Cal data from OTP [...] ar9300_hw_attach: ar9300_eeprom_attach returned 0 [...] ath0: [HT] enabling HT modes [...] ath0: [HT] enabling short-GI in 20MHz mode [...] ath0: [HT] 1 stream STBC receive enabled [...] ath0: [HT] 1 RX streams; 1 TX streams [...] ath0: AR9485 mac 576.1 RF5110 phy 28.8 [...] ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] xhci2: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7800000-0xf7807fff irq 19 at device 0.0 on pci9 [...] xhci2: 32 bytes context size, 32-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus3 on xhci2 [...] usbus3: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d37000-0xf7d373ff irq 23 at device 29.0 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci1 [...] usbus4: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Panther Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d36000-0xf7d367ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci1 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0 [...] pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0 [...] hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm5: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] ugen3.1: <0x1b21 XHCI root HUB> at usbus3 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] ugen2.1: <0x1b21 XHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub4: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub2: 4 ports with 4 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] ugen4.2: <vendor 0x8087 product 0x0024> at usbus4 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus4 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub6 on uhub3 [...] uhub6: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub6: 6 ports with 6 removable, self powered [...] uhub5: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] em1: link state changed to UP [...] em2: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] em2: link state changed to DOWN [...] em0: link state changed to DOWN [...] em1: link state changed to DOWN [...] em2: link state changed to UP [...] em1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to UP [...] 742.067928 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] 742.118494 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to DOWN [...] 742.562261 [ 853] iflib_netmap_config txr 1 rxr 1 txd 1024 rxd 1024 rbufsz 2048 [...] em1: link state changed to UP