[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) N95 (1689.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x80fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16356634624 (15598 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cc9000-0x75cc901e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x80700000-0x80701fff,0x80703000-0x807030ff,0x80702000-0x807027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x5000-0x50ff mem 0x80604000-0x80604fff,0x80600000-0x80603fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 29.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x80404000-0x80404fff,0x80400000-0x80403fff at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001110000-0x6001113fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1689602571 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SATA SSD HAFEB2.1> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Realtek Bluetooth Radio> at usbus0 [...] Root mount waiting for: usbus0 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Disk 2.0 (0xffff:0x5678) [...] ugen0.3: <USB Disk 2.0> at usbus0 [...] umass0 on uhub0 [...] umass0: <USB Disk 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:1:0: Attached to scbus1 [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <VendorCo ProductCode 2.00> Removable Direct Access SPC-2 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 30000MB (61440000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] Root mount waiting for: usbus0 [...] ugen0.4: <CSCTEK USB Audio and HID> at usbus0 [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-4> at device 25.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Alder Lake-M I2C Controller-5> at device 25.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x10 [...] iicbus1: <unknown card> at addr 0x67 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001118000-0x60011180ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ubt0 on uhub0 [...] ubt0: <Realtek Bluetooth Radio, class 224/1, rev 1.10/1.10, addr 1> on usbus0 [...] uaudio0 on uhub0 [...] uaudio0: <CSCTEK USB Audio and HID, class 0/0, rev 2.00/80.07, addr 3> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm0 on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid0 on uhub0 [...] uhid0: <CSCTEK USB Audio and HID, class 0/0, rev 2.00/80.07, addr 3> on usbus0 [...] device_attach: uhid0 attach returned 12 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst 2600:1901:0:38d7::, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst 2600:1901:0:38d7::, nxt 6, rcvif re0, outif re1 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst 2600:1901:0:38d7::, nxt 6, rcvif re0, outif re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re1: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] re1: link state changed to DOWN [...] re1: promiscuous mode disabled [...] re1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 9h47m55s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) N95 (1689.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x80fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16356634624 (15598 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cc9000-0x75cc901e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x80700000-0x80701fff,0x80703000-0x807030ff,0x80702000-0x807027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x5000-0x50ff mem 0x80604000-0x80604fff,0x80600000-0x80603fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 29.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x80404000-0x80404fff,0x80400000-0x80403fff at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001110000-0x6001113fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1689602039 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SATA SSD HAFEB2.1> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Realtek Bluetooth Radio> at usbus0 [...] ugen0.3: <CSCTEK USB Audio and HID> at usbus0 [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-4> at device 25.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Alder Lake-M I2C Controller-5> at device 25.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x10 [...] iicbus1: <unknown card> at addr 0x67 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001118000-0x60011180ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ubt0 on uhub0 [...] ubt0: <Realtek Bluetooth Radio, class 224/1, rev 1.10/1.10, addr 1> on usbus0 [...] uaudio0 on uhub0 [...] uaudio0: <CSCTEK USB Audio and HID, class 0/0, rev 2.00/80.07, addr 2> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm0 on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid0 on uhub0 [...] uhid0: <CSCTEK USB Audio and HID, class 0/0, rev 2.00/80.07, addr 2> on usbus0 [...] device_attach: uhid0 attach returned 12 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re0: link state changed to UP [...] re1: promiscuous mode enabled [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] re1: watchdog timeout [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif re0, outif re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] re1: link state changed to DOWN [...] re1: promiscuous mode disabled [...] re1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 22m30s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) N95 (1689.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x80fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16356642816 (15598 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cc9000-0x75cc901e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x80700000-0x80701fff,0x80703000-0x807030ff,0x80702000-0x807027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x5000-0x50ff mem 0x80604000-0x80604fff,0x80600000-0x80603fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 29.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x80404000-0x80404fff,0x80400000-0x80403fff at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001110000-0x6001113fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1689602848 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SATA SSD HAFEB2.1> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Realtek Bluetooth Radio> at usbus0 [...] ugen0.3: <CSCTEK USB Audio and HID> at usbus0 [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-4> at device 25.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Alder Lake-M I2C Controller-5> at device 25.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x10 [...] iicbus1: <unknown card> at addr 0x67 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001118000-0x60011180ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ubt0 on uhub0 [...] ubt0: <Realtek Bluetooth Radio, class 224/1, rev 1.10/1.10, addr 1> on usbus0 [...] uaudio0 on uhub0 [...] uaudio0: <CSCTEK USB Audio and HID, class 0/0, rev 2.00/80.07, addr 2> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm0 on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid0 on uhub0 [...] uhid0: <CSCTEK USB Audio and HID, class 0/0, rev 2.00/80.07, addr 2> on usbus0 [...] device_attach: uhid0 attach returned 12 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] re0: link state changed to UP [...] re1: link state changed to UP [...] re1: promiscuous mode enabled [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] re1: link state changed to DOWN [...] re1: promiscuous mode disabled [...] re1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 15m29s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) N95 (1689.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x80fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16356614144 (15598 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cc9000-0x75cc901e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x80700000-0x80701fff,0x80703000-0x807030ff,0x80702000-0x807027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x5000-0x50ff mem 0x80604000-0x80604fff,0x80600000-0x80603fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 29.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x80404000-0x80404fff,0x80400000-0x80403fff at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001110000-0x6001113fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1689602309 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SATA SSD HAFEB2.1> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Realtek Bluetooth Radio> at usbus0 [...] ugen0.3: <CSCTEK USB Audio and HID> at usbus0 [...] re0: link state changed to UP [...] re1: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-4> at device 25.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Alder Lake-M I2C Controller-5> at device 25.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x10 [...] iicbus1: <unknown card> at addr 0x67 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001118000-0x60011180ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] rtw880: <rtw_8821ce> port 0x4000-0x40ff mem 0x80500000-0x8050ffff at device 0.0 on pci2 [...] rtw880: successfully loaded firmware image 'rtw88/rtw8821c_fw.bin' [...] rtw880: Firmware version 24.8.0, H2C version 12 [...] rtw880: failed to init rx buffer [...] rtw880: failed to allocate pci resources [...] rtw880: failed to setup pci resources [...] device_attach: rtw880 attach returned 16 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ubt0 on uhub0 [...] ubt0: <Realtek Bluetooth Radio, class 224/1, rev 1.10/1.10, addr 1> on usbus0 [...] uaudio0 on uhub0 [...] uaudio0: <CSCTEK USB Audio and HID, class 0/0, rev 2.00/80.07, addr 2> on usbus0 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Play[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Play[0]: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x4ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm0 on uaudio0 [...] uaudio0: No HID volume keys found. [...] uhid0 on uhub0 [...] uhid0: <CSCTEK USB Audio and HID, class 0/0, rev 2.00/80.07, addr 2> on usbus0 [...] device_attach: uhid0 attach returned 12 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re0: link state changed to DOWN [...] re1: link state changed to DOWN [...] re0: link state changed to UP [...] re1: link state changed to UP [...] re1: promiscuous mode enabled [...] re1: link state changed to DOWN [...] re1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] re1: link state changed to DOWN [...] re1: promiscuous mode disabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re0 [...] re1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 [...] re1: watchdog timeout [...] re1: link state changed to DOWN [...] done [...] All buffers synced. [...] Uptime: 19m42s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) N95 (1689.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x80fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16356646912 (15598 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cc9000-0x75cc901e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x6000-0x603f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x6090-0x6097,0x6080-0x6083,0x6060-0x607f mem 0x80700000-0x80701fff,0x80703000-0x807030ff,0x80702000-0x807027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x5000-0x50ff mem 0x80604000-0x80604fff,0x80600000-0x80603fff at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 29.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x80404000-0x80404fff,0x80400000-0x80403fff at device 0.0 on pci3 [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: Chip rev. 0x54000000 [...] re1: MAC rev. 0x00100000 [...] miibus1: <MII bus> on re1 [...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 [...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] re1: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001110000-0x6001113fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1689602972 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SATA SSD HAFEB2.1> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <Realtek Bluetooth Radio> at usbus0 [...] ugen0.3: <CSCTEK USB Audio and HID> at usbus0