[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3 CPU 550 @ 3.20GHz (3200.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x20655 Family=0x6 Model=0x25 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28000800<SYSCALL,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 2147483648 (2048 MB) [...] avail memory = 1901903872 (1813 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <111610 APIC1745> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 6 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1600033918 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <MGWOEM MEGAWARE> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem 0xfbc00000-0xfbffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel Ironlake (D) SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 65532k stolen memory [...] vgapci0: Boot video device [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xe880-0xe89f mem 0xfbbc0000-0xfbbdffff,0xfbbf8000-0xfbbf8fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfbbf6000-0xfbbf63ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Ibex Peak HDA Controller> mem 0xfbbf0000-0xfbbf3fff irq 22 at device 27.0 on pci0 [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfbbf4000-0xfbbf43ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Ibex Peak AHCI SATA controller> port 0xe800-0xe807,0xe480-0xe483,0xe400-0xe407,0xe080-0xe083,0xe000-0xe01f mem 0xfbbee000-0xfbbee7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/16 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC662 (Rear Digital)> at nid 30 on hdaa0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD5000AAKS-00UU3A0 01.03B01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] em0: link state changed to UP [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] em0: link state changed to DOWN [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ukbd1 on uhub3 [...] ukbd1: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] ums0 on uhub3 [...] ums0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] ukbd0: at uhub3, port 1, addr 3 (disconnected) [...] ukbd0: detached [...] ums0: at uhub3, port 1, addr 3 (disconnected) [...] ums0: detached [...] ukbd1: at uhub3, port 1, addr 3 (disconnected) [...] ukbd1: detached [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] pflog0: promiscuous mode enabled [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 (disconnected) [...] ugen0.3: <Realtek 802.11n NIC> at usbus0 [...] rtwn0 on uhub3 [...] rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 3> on usbus0 [...] rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'rtwn0_wlan1' [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'rtwn0_wlan1' [...] wlan1: Ethernet address: ... [...] wlan1: changing name to 'rtwn0_wlan2' [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'rtwn0_wlan1' [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'rtwn0_wlan1' [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'rtwn0_wlan1' [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] wlan1: Ethernet address: ... [...] wlan1: changing name to 'rtwn0_wlan2' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] rtwn0_wlan2: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan2: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan2: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan2: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan2: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan2: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 4 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED [...] ugen0.4: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.3: <Realtek 802.11n NIC> at usbus0 (disconnected) [...] rtwn0: at uhub3, port 5, addr 3 (disconnected) [...] rtwn0: detached [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ums0 on uhub3 [...] ums0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] ukbd1 on uhub3 [...] ukbd1: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 3 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3 CPU 550 @ 3.20GHz (3200.07-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x20655 Family=0x6 Model=0x25 Stepping=5 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT> [...] AMD Features=0x28000800<SYSCALL,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 2147483648 (2048 MB) [...] avail memory = 1901903872 (1813 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <111610 APIC1745> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0: Changing APIC ID to 6 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1600036340 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <MGWOEM MEGAWARE> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem 0xfbc00000-0xfbffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel Ironlake (D) SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 65532k stolen memory [...] vgapci0: Boot video device [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xe880-0xe89f mem 0xfbbc0000-0xfbbdffff,0xfbbf8000-0xfbbf8fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfbbf6000-0xfbbf63ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Ibex Peak HDA Controller> mem 0xfbbf0000-0xfbbf3fff irq 22 at device 27.0 on pci0 [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfbbf4000-0xfbbf43ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Ibex Peak AHCI SATA controller> port 0xe800-0xe807,0xe480-0xe483,0xe400-0xe407,0xe080-0xe083,0xe000-0xe01f mem 0xfbbee000-0xfbbee7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/16 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC662 (Rear Digital)> at nid 30 on hdaa0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD5000AAKS-00UU3A0 01.03B01> ATA8-ACS SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ukbd1 on uhub3 [...] ukbd1: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] em0: link state changed to UP [...] ums0 on uhub3 [...] ums0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] lo0: link state changed to UP [...] aesni0: No AES or SHA support. [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 (disconnected) [...] ukbd0: at uhub3, port 5, addr 3 (disconnected) [...] ukbd0: detached [...] ums0: at uhub3, port 5, addr 3 (disconnected) [...] ums0: detached [...] ukbd1: at uhub3, port 5, addr 3 (disconnected) [...] ukbd1: detached [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ums0 on uhub3 [...] ums0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] ukbd1 on uhub3 [...] ukbd1: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 (disconnected) [...] ukbd0: at uhub3, port 5, addr 3 (disconnected) [...] ukbd0: detached [...] ums0: at uhub3, port 5, addr 3 (disconnected) [...] ums0: detached [...] ukbd1: at uhub3, port 5, addr 3 (disconnected) [...] ukbd1: detached [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen0.3: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen0.3: <Unknown > at usbus0 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ums0 on uhub3 [...] ums0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] ukbd1 on uhub3 [...] ukbd1: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored) [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED [...] ugen1.3: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] ugen0.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus0 (disconnected) [...] ukbd0: at uhub3, port 5, addr 3 (disconnected) [...] ukbd0: detached [...] ums0: at uhub3, port 5, addr 3 (disconnected) [...] ums0: detached [...] ukbd1: at uhub3, port 5, addr 3 (disconnected) [...] ukbd1: detached [...] ugen0.3: <Realtek 802.11n NIC> at usbus0 [...] rtwn0 on uhub3 [...] rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 3> on usbus0 [...] rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'rtwn0_wlan1' [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] rtwn0_wlan1: ieee80211_new_state_locked: pending INIT -> SCAN transition lost [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] rtwn0_wlan1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] em0: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ugen1.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ums0 on uhub2 [...] ums0: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus1 [...] ukbd1 on uhub2 [...] ukbd1: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard, class 0/0, rev 2.00/21.12, addr 3> on usbus1 [...] kbd3 at ukbd1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ugen1.3: <Kingston HyperX Alloy FPS Pro Mechanical Gaming Keyboard> at usbus1 (disconnected) [...] ukbd0: at uhub2, port 6, addr 3 (disconnected) [...] ukbd0: detached [...] ums0: at uhub2, port 6, addr 3 (disconnected) [...] ums0: detached [...] ukbd1: at uhub2, port 6, addr 3 (disconnected) [...] ukbd1: detached [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled