[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1920x1080 [...] CPU: AMD Ryzen 7 4800H with Radeon Graphics (2894.74-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> [...] Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> [...] Structured Extended Features2=0x400004<UMIP,RDPID> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD> [...] SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 32703152128 (31188 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL WN09 > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.1> irqs 0-23 [...] ioapic1 <Version 2.1> irqs 24-55 [...] Launching APs: 8 7 6 12 9 13 1 4 14 10 5 15 11 2 3 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xca637000-0xca63701e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <DELL WN09> [...] Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.LPC0.EC0], AE_NOT_FOUND (20201113/dswload2-315) [...] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 iomem 0xfe000000-0xfe002fff on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> mem 0xd0800000-0xd0803fff at device 0.0 on pci1 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] vgapci0: <VGA-compatible display> mem 0x1f4b0000000-0x1f4bfffffff,0x1f4c0000000-0x1f4c01fffff,0xd0700000-0xd077ffff at device 0.0 on pci3 [...] hdac0: <ATI (0xab38) HDA Controller> mem 0xd0780000-0xd0783fff at device 0.1 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0xd0600000-0xd0603fff at device 0.0 on pci4 [...] pcib5: <ACPI PCI-PCI bridge> at device 2.1 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xd0504000-0xd0504fff,0xd0500000-0xd0503fff at device 0.0 on pci5 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib6: <ACPI PCI-PCI bridge> at device 2.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] vgapci1: <VGA-compatible display> port 0x1000-0x10ff mem 0x1f490000000-0x1f49fffffff,0x1f4a0000000-0x1f4a01fffff,0xd0300000-0xd037ffff at device 0.0 on pci7 [...] hdac1: <ATI (0x1637) HDA Controller> mem 0xd03c8000-0xd03cbfff at device 0.1 on pci7 [...] pci7: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd0000000-0xd00fffff at device 0.3 on pci7 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xd0100000-0xd01fffff at device 0.4 on pci7 [...] xhci1: 64 bytes context size, 64-bit DMA [...] usbus1: waiting for BIOS to give up control [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci7: <multimedia> at device 0.5 (no driver attached) [...] hdac2: <AMD Raven HDA Controller> mem 0xd03c0000-0xd03c7fff at device 0.6 on pci7 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button1: <Sleep Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model Elantech Touchpad, device ID 0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] Timecounter "TSC-low" frequency 1447280929 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 [...] pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 [...] ugen1.1: <AMD XHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen0.1: <AMD XHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 64MB host memory buffer [...] nvd0: <PM991 NVMe Samsung 256GB> NVMe namespace [...] nvd0: 244198MB (500118192 512 byte sectors) [...] hdacc1: <ATI R6xx HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <ATI R6xx Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <ATI R6xx (HDMI)> at nid 3 on hdaa1 [...] GEOM_LABEL[1]: MSDOSFS: nvd0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider nvd0 is diskid/XXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label for provider nvd0p1 is gptid/HASH_2FD-1937-1C70-D7D6-7333C03D4639. [...] GEOM_LABEL[1]: MSDOSFS: nvd0p1: FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: nvd0p1: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label for provider nvd0p2 is gpt/recovery. [...] GEOM_LABEL[1]: Label for provider nvd0p2 is gptid/HASH_C4E-A21A-1697-F427-405C26245110. [...] GEOM_LABEL[1]: MSDOSFS: nvd0p2: FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: nvd0p2: FAT32 volume has no name. [...] GEOM_LABEL[1]: Label for provider nvd0p3 is gptid/HASH_4BA-1845-590F-C09C-12DC66E316B9. [...] GEOM_LABEL[1]: MSDOSFS: nvd0p3: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on nvd0p3. [...] hdacc2: <Realtek ALC295 HDA CODEC> at cad 0 on hdac2 [...] hdaa2: <Realtek ALC295 Audio Function Group> at nid 1 on hdacc2 [...] GEOM_LABEL[1]: Label for provider nvd0p4 is gptid/HASH_F7E-9F51-0860-1F0E-533E324566DD. [...] GEOM_LABEL[1]: MSDOSFS: nvd0p4: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_2FD-1937-1C70-D7D6-7333C03D4639(gptid/HASH_2FD-1937-1C70-D7D6-7333C03D4639) already exists (diskid/XXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX FAT32 volume has no name. [...] GEOM_LABEL[1]: Label recovery(gpt/recovery) already exists (diskid/XXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_C4E-A21A-1697-F427-405C26245110(gptid/HASH_C4E-A21A-1697-F427-405C26245110) already exists (diskid/XXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX FAT32 volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX FAT32 volume has no name. [...] pcm3: <Realtek ALC295 (Internal Analog Speaker)> at nid 20 on hdaa2 [...] GEOM_LABEL[1]: Label HASH_4BA-1845-590F-C09C-12DC66E316B9(gptid/HASH_4BA-1845-590F-C09C-12DC66E316B9) already exists (diskid/XXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: Label HASH_F7E-9F51-0860-1F0E-533E324566DD(gptid/HASH_F7E-9F51-0860-1F0E-533E324566DD) already exists (diskid/XXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] pcm4: <Realtek ALC295 (Right Analog Headphones)> at nid 33 on hdaa2 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] uhub0: 6 ports with 6 removable, self powered [...] uhub1: 6 ports with 6 removable, self powered [...] ugen1.2: <vendor 0x05ac Meetion Wireless> at usbus1 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x05ac Meetion Wireless, class 0/0, rev 1.10/2.00, addr 1> on usbus1 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.3: <CN0M1RXT8LG000ADC6RYA01 IntegratedWebcamHD> at usbus1 [...] ugen1.4: <vendor 0x05e3 USB2.0 Hub> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.52, addr 3> on usbus1 [...] uhub2: MTT enabled [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device General UDisk (0xabcd:0x1234) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device General UDisk (0xabcd:0x1234) [...] ugen0.2: <General UDisk> at usbus0 [...] umass0 on uhub1 [...] umass0: <General UDisk, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4100 [...] umass0:0:0: Attached to scbus0 [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <General UDisk 5.00> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: 15000MB (30720000 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT table is corrupt or invalid. [...] GEOM: da0: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_12E-BE5D-C5F7-766C-D226D8D86019. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_29F-7254-D180-8594-A2C4916D957A. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: Label HASH_12E-BE5D-C5F7-766C-D226D8D86019(gptid/HASH_12E-BE5D-C5F7-766C-D226D8D86019) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_29F-7254-D180-8594-A2C4916D957A(gptid/HASH_29F-7254-D180-8594-A2C4916D957A) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] uhub2: 2 ports with 0 removable, self powered [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] ugen1.5: <USB Storage USB Storage> at usbus1 [...] umass1 on uhub2 [...] umass1: <USB Storage USB Storage, class 0/0, rev 2.00/14.04, addr 4> on usbus1 [...] umass1: SCSI over Bulk-Only; quirks = 0xc101 [...] umass1:1:1: Attached to scbus1 [...] (probe0:umass-sim1:1:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim1:1:0:0): SCSI status: Check Condition [...] (probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim1:1:0:0): Error 6, Unretryable error [...] da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 [...] da1: <Generic STORAGE DEVICE 1404> Removable Direct Access SPC-4 SCSI device [...] da1: 40.000MB/s transfers [...] da1: Attempt to query device size failed: NOT READY, Medium not present [...] da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] Root mount waiting for: usbus1 [...] ugen1.6: <Alienware AW-ELC> at usbus1 [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] [drm] amdgpu kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (NAVI10 0x1002:0x731F 0x1028:0x09F5 0xC2). [...] drmn0: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [...] [drm] register mmio base: 0xD0700000 [...] [drm] register mmio size: 524288 [...] [drm] add ip block number 0 <nv_common> [...] [drm] add ip block number 1 <gmc_v10_0> [...] [drm] add ip block number 2 <navi10_ih> [...] [drm] add ip block number 3 <psp> [...] [drm] add ip block number 4 <smu> [...] [drm] add ip block number 5 <dm> [...] [drm] add ip block number 6 <gfx_v10_0> [...] [drm] add ip block number 7 <sdma_v5_0> [...] [drm] add ip block number 8 <vcn_v2_0> [...] [drm] add ip block number 9 <jpeg_v2_0> [...] drmn0: Fetched VBIOS from ATRM [...] amdgpu: ATOM BIOS: SWBRT62309.001 [...] [drm] VCN decode is enabled in VM mode [...] [drm] VCN encode is enabled in VM mode [...] [drm] JPEG decode is enabled in VM mode [...] [drm] GPU posting now... [...] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [...] drmn0: VRAM: 6128M 0x0000008000000000 - 0x000000817EFFFFFF (6128M used) [...] drmn0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [...] [drm] Detected VRAM RAM=6128M, BAR=256M [...] [drm] RAM width 192bits GDDR6 [...] [TTM] Zone kernel: Available graphics memory: 16428260 KiB [...] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [...] [TTM] Initializing pool allocator [...] [drm] amdgpu: 6128M of VRAM memory ready [...] [drm] amdgpu: 6128M of GTT memory ready. [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] PCIE GART of 512M enabled (table at 0x0000008000000000). [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_sos.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_asd.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_ta.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_smc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_pfp.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_me.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_ce.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_rlc.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_mec.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_mec2.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_sdma.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_sdma1.bin' [...] drmn0: successfully loaded firmware image 'amdgpu/navi10_vcn.bin' [...] [drm] Found VCN firmware Version ENC: 1.20 DEC: 5 VEP: 0 Revision: 1 [...] drmn0: Will use PSP to load VCN firmware [...] [drm] reserve 0x900000 from 0x817e400000 for PSP TMR [...] drmn0: RAS: optional ras ta ucode is not available [...] drmn0: RAP: optional rap ta ucode is not available [...] drmn0: smu driver if version = 0x00000036, smu fw if version = 0x00000037, smu fw version = 0x002a4100 (42.65.0) [...] drmn0: SMU driver if version not matched [...] drmn0: use vbios provided pptable [...] drmn0: smc_dpm_info table revision(format.content): 4.5 [...] drmn0: SMU is initialized successfully! [...] [drm] Display Core initialized with v3.2.104! [...] lkpi_iic0: <LinuxKPI I2C> on drmn0 [...] iicbus0: <Philips I2C bus> on lkpi_iic0 [...] iic0: <I2C generic I/O> on iicbus0 [...] lkpi_iic1: <LinuxKPI I2C> on drmn0 [...] iicbus1: <Philips I2C bus> on lkpi_iic1 [...] iic1: <I2C generic I/O> on iicbus1 [...] [drm] kiq ring mec 2 pipe 1 q 0 [...] [drm] VCN decode and encode initialized successfully(under DPG Mode). [...] [drm] JPEG decode initialized successfully. [...] drmn0: SE 2, SH per SE 2, CU per SH 10, active_cu_number 36 [...] [drm] fb mappable at 0x1F4B020A000 [...] [drm] vram apper at 0x1F4B0000000 [...] [drm] size 14745600 [...] [drm] fb depth is 24 [...] [drm] pitch is 10240 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1440 width=2560 depth=32 [...] pbase=0x1f4b020a000 vbase=0xfffffe013fc0a000 [...] name=drmn0 flags=0x0 stride=10240 bpp=32 [...] end FB_INFO [...] drmn0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [...] drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [...] drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [...] drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [...] drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [...] drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [...] drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [...] drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [...] drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [...] drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [...] drmn0: ring sdma0 uses VM inv eng 12 on hub 0 [...] drmn0: ring sdma1 uses VM inv eng 13 on hub 0 [...] drmn0: ring vcn_dec uses VM inv eng 0 on hub 1 [...] drmn0: ring vcn_enc0 uses VM inv eng 1 on hub 1 [...] drmn0: ring vcn_enc1 uses VM inv eng 4 on hub 1 [...] drmn0: ring jpeg_dec uses VM inv eng 5 on hub 1 [...] vgapci0: child drmn0 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] lkpi_iic2: <LinuxKPI I2C> on drm2 [...] iicbus2: <Philips I2C bus> on lkpi_iic2 [...] iic2: <I2C generic I/O> on iicbus2 [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn0 on minor 0 [...] drmn1: <drmn> on vgapci1 [...] vgapci1: child drmn1 requested pci_enable_io [...] vgapci1: child drmn1 requested pci_enable_io [...] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x1028:0x09F5 0xC6). [...] drmn1: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [...] [drm] register mmio base: 0xD0300000 [...] [drm] register mmio size: 524288 [...] [drm] add ip block number 0 <soc15_common> [...] [drm] add ip block number 1 <gmc_v9_0> [...] [drm] add ip block number 2 <vega10_ih> [...] [drm] add ip block number 3 <psp> [...] [drm] add ip block number 4 <smu> [...] [drm] add ip block number 5 <gfx_v9_0> [...] [drm] add ip block number 6 <sdma_v4_0> [...] [drm] add ip block number 7 <dm> [...] [drm] add ip block number 8 <vcn_v2_0> [...] [drm] add ip block number 9 <jpeg_v2_0> [...] drmn1: Fetched VBIOS from VFCT [...] amdgpu: ATOM BIOS: 113-RENOIR-037 [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_sdma.bin' [...] [drm] VCN decode is enabled in VM mode [...] [drm] VCN encode is enabled in VM mode [...] [drm] JPEG decode is enabled in VM mode [...] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [...] drmn1: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [...] drmn1: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [...] drmn1: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [...] [drm] Detected VRAM RAM=512M, BAR=512M [...] [drm] RAM width 128bits DDR4 [...] [drm] amdgpu: 512M of VRAM memory ready [...] [drm] amdgpu: 3072M of GTT memory ready. [...] [drm] GART: num cpu pages 262144, num gpu pages 262144 [...] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000). [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_asd.bin' [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_pfp.bin' [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_me.bin' [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_ce.bin' [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_rlc.bin' [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_mec.bin' [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_mec2.bin' [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_dmcub.bin' [...] [drm] Loading DMUB firmware via PSP: version=0x01010027 [...] drmn1: successfully loaded firmware image 'amdgpu/renoir_vcn.bin' [...] [drm] Found VCN firmware Version ENC: 1.20 DEC: 5 VEP: 0 Revision: 3 [...] drmn1: Will use PSP to load VCN firmware [...] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR [...] drmn1: SMU is initialized successfully! [...] [drm] kiq ring mec 2 pipe 1 q 0 [...] [drm] Display Core initialized with v3.2.104! [...] [drm] DMUB hardware initialized: version=0x01010027 [...] lkpi_iic3: <LinuxKPI I2C> on drmn1 [...] iicbus3: <Philips I2C bus> on lkpi_iic3 [...] iic3: <I2C generic I/O> on iicbus3 [...] lkpi_iic4: <LinuxKPI I2C> on drmn1 [...] iicbus4: <Philips I2C bus> on lkpi_iic4 [...] iic4: <I2C generic I/O> on iicbus4 [...] [drm] VCN decode and encode initialized successfully(under DPG Mode). [...] [drm] JPEG decode initialized successfully. [...] drmn1: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7 [...] [drm] fb mappable at 0x810CD1000 [...] [drm] vram apper at 0x810000000 [...] [drm] size 8294400 [...] [drm] fb depth is 24 [...] [drm] pitch is 7680 [...] VT: Driver priority 110 too low. Current 110 [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] pbase=0x810cd1000 vbase=0xfffff80810cd1000 [...] name=drmn1 flags=0x0 stride=7680 bpp=32 [...] end FB_INFO [...] drmn1: ring gfx uses VM inv eng 0 on hub 0 [...] drmn1: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [...] drmn1: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [...] drmn1: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [...] drmn1: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [...] drmn1: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [...] drmn1: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [...] drmn1: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [...] drmn1: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [...] drmn1: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [...] drmn1: ring sdma0 uses VM inv eng 0 on hub 1 [...] drmn1: ring vcn_dec uses VM inv eng 1 on hub 1 [...] drmn1: ring vcn_enc0 uses VM inv eng 4 on hub 1 [...] drmn1: ring vcn_enc1 uses VM inv eng 5 on hub 1 [...] drmn1: ring jpeg_dec uses VM inv eng 6 on hub 1 [...] vgapci1: child drmn1 requested pci_get_powerstate [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.vblank_offdelay)! [...] sysctl_warn_reuse: can't re-use a leaf (hw.dri.timestamp_precision)! [...] lkpi_iic5: <LinuxKPI I2C> on drm4 [...] iicbus5: <Philips I2C bus> on lkpi_iic5 [...] iic5: <I2C generic I/O> on iicbus5 [...] lkpi_iic6: <LinuxKPI I2C> on drm5 [...] iicbus6: <Philips I2C bus> on lkpi_iic6 [...] iic6: <I2C generic I/O> on iicbus6 [...] [drm] Initialized amdgpu 3.40.0 20150101 for drmn1 on minor 1 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.AMWW.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_video1: <ACPI video extension> on vgapci1 [...] Cuse v0.1.37 @ /dev/cuse [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0 [...] iicbus7: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus7: <unknown card> at addr 0x2c [...] iic7: <I2C generic I/O> on iicbus7 [...] iichid0: <DELL09F5:08 04F3:30CB I2C HID device> at addr 0x2c on iicbus7 [...] iichid0: Interrupt setup failed. Fallback to sampling [...] hidbus0: <HID bus> on iichid0 [...] driver bug: Unable to set devclass (class: ppc devname: (unknown)) [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] hms0: <DELL09F5:08 04F3:30CB Mouse> on hidbus0 [...] hms0: 2 buttons and [XY] coordinates ID=1 [...] hmt0: <DELL09F5:08 04F3:30CB TouchPad> on hidbus0 [...] hconf0: <DELL09F5:08 04F3:30CB Configuration> on hidbus0 [...] hmt0: Multitouch touchpad with 0 external buttons, click-pad [...] hmt0: 5 contacts with [C] properties. Report range [0:0] - [3211:2431] [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ums0 on uhub0 [...] ums0: <vendor 0x05ac Meetion Wireless, class 0/0, rev 1.10/2.00, addr 1> on usbus1 [...] ums0: 8 buttons and [XYZT] coordinates ID=2 [...] uhid0 on uhub2 [...] uhid0: <Alienware AW-ELC, class 0/0, rev 2.10/2.00, addr 5> on usbus1 [...] amdsmn0: <AMD Family 17h System Management Network> on hostb0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0