[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p21-HBSD #0 1c99b63a2ba(stable/21.7)-dirty: Wed Nov 10 11:17:14 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] module_register: cannot register pci/if_re from kernel; already loaded from if_re.ko [...] Module pci/if_re failed to register: 17 [...] CPU: AMD Opteron(tm) X3421 APU (2096.11-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x660f01 Family=0x15 Model=0x60 Stepping=1 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x2febbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC,MWAITX> [...] Structured Extended Features=0x1a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2> [...] XSAVE Features=0x1<XSAVEOPT> [...] AMD Extended Feature Extensions ID EBX=0x1000 [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16063086592 (15318 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796) [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 2 3 1 [...] Timecounter "TSC" frequency 2096111668 Hz quality 1000 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff812947f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000048 [4344] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 450 [...] Event timer "HPET2" frequency 14318180 Hz quality 450 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf07fffff,0xfdd00000-0xfdd3ffff at device 1.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xfdc40000-0xfdc407ff at device 0.0 on pci1 [...] ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported [...] ahci0: quirks=0x900<NOBSYRES,ALTSIG> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahcich6: <AHCI channel> at channel 6 on ahci0 [...] ahcich7: <AHCI channel> at channel 7 on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> at device 2.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 1.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xf0b04000-0xf0b04fff,0xf0b00000-0xf0b03fff at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] pcib5: <PCI-PCI bridge> at device 3.0 on pci3 [...] pci5: <PCI bus> on pcib5 [...] re1: <Realtek PCIe GbE Family Controller> port 0xc000-0xc0ff mem 0xf0a04000-0xf0a04fff,0xf0a00000-0xf0a03fff at device 0.0 on pci5 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: ASPM disabled [...] re1: version:1.96.04 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] pcib6: <PCI-PCI bridge> at device 5.0 on pci3 [...] pci6: <PCI bus> on pcib6 [...] re2: <Realtek PCIe GbE Family Controller> port 0xb000-0xb0ff mem 0xf0904000-0xf0904fff,0xf0900000-0xf0903fff at device 0.0 on pci6 [...] re2: Using Memory Mapping! [...] re2: Using 1 MSI-X message [...] re2: ASPM disabled [...] re2: version:1.96.04 [...] re2: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re2: Ethernet address: ... [...] pcib7: <PCI-PCI bridge> at device 7.0 on pci3 [...] pci7: <PCI bus> on pcib7 [...] re3: <Realtek PCIe GbE Family Controller> port 0xa000-0xa0ff mem 0xf0804000-0xf0804fff,0xf0800000-0xf0803fff at device 0.0 on pci7 [...] re3: Using Memory Mapping! [...] re3: Using 1 MSI-X message [...] re3: ASPM disabled [...] re3: version:1.96.04 [...] re3: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re3: Ethernet address: ... [...] pcib8: <ACPI PCI-PCI bridge> at device 2.5 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] bge0: <HP Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0xf0c50000-0xf0c5ffff,0xf0c40000-0xf0c4ffff,0xf0c30000-0xf0c3ffff at device 0.0 on pci8 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <HP Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0xf0c20000-0xf0c2ffff,0xf0c10000-0xf0c1ffff,0xf0c00000-0xf0c0ffff at device 0.1 on pci8 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib9: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] t5nex0: <Chelsio T520-SO> mem 0xfd300000-0xfd37ffff,0xfc000000-0xfcffffff,0xfd884000-0xfd885fff at device 0.4 on pci9 [...] t5nex0: Disabled No Snoop/Relaxed Ordering on pcib9 [...] t5nex0: KLD with default config is not available. [...] t5nex0: failed to upload config file to card: 2. [...] t5nex0: failed (2) to configure card with "default" profile, will fall back to a basic configuration and retry. [...] cxl0: <port 0> on t5nex0 [...] cxl0: Ethernet address: ... [...] cxl0: 4 txq, 4 rxq (NIC) [...] cxl1: <port 1> on t5nex0 [...] cxl1: Ethernet address: ... [...] cxl1: 4 txq, 4 rxq (NIC) [...] t5nex0: PCIe gen3 x8, 2 ports, 10 MSI-X interrupts, 18 eq, 9 iq [...] pci9: <mass storage, SCSI> at device 0.5 (no driver attached) [...] pci9: <serial bus, Fibre Channel> at device 0.6 (no driver attached) [...] pci0: <encrypt/decrypt> at device 8.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfdd64000-0xfdd65fff at device 16.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Unable to map MSI-X table [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] ahci1: <AMD KERNCZ AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfdd69000-0xfdd693ff at device 17.0 on pci0 [...] ahci1: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich8: <AHCI channel> at channel 0 on ahci1 [...] ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdd68000-0xfdd680ff at device 18.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc6000-0xfedc7fff irq 10 on acpi0 [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen1.1: <AMD EHCI root HUB> at usbus1 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <CPS CP1500PFCLCD> at usbus0 [...] ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <HGST HUS726060ALE614 APDEKP35> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 5723166MB (11721045168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <HGST HUS726060ALE614 APDEKP35> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 5723166MB (11721045168 512 byte sectors) [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <HGST HUS726060ALE614 APDEKP35> ACS-2 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 5723166MB (11721045168 512 byte sectors) [...] ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada3: <HGST HUS726060ALE614 APDEKP35> ACS-2 ATA SATA 3.x device [...] ada3: Serial Number... [...] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 5723166MB (11721045168 512 byte sectors) [...] pass4 at ahcich7 bus 0 scbus7 target 0 lun 0 [...] pass4: <Marvell Console 1.01> Removable Processor SCSI device [...] pass4: Serial Number... [...] pass4: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 [...] smbus0: <System Management Bus> on intsmb0 [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] amdsmn0: <AMD Family 15h System Management Network> on hostb0 [...] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 [...] cxl0: tso4 disabled due to -txcsum. [...] cxl0: tso6 disabled due to -txcsum6. [...] lagg0: IPv6 addresses on cxl0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] cxl1: tso4 disabled due to -txcsum. [...] cxl1: tso6 disabled due to -txcsum6. [...] lagg0: IPv6 addresses on cxl1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] cxl1: link state changed to DOWN [...] cxl0: link state changed to UP [...] tun2: changing name to 'ovpns2' [...] cxl1: link state changed to UP [...] bge0: link state changed to DOWN [...] re0: link state changed to UP [...] re1: link state changed to UP [...] re2: link state changed to UP [...] re3: link state changed to UP [...] bge1: link state changed to DOWN [...] bge0: link state changed to UP [...] bge1: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] lagg0: link state changed to UP [...] ovpns2: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] 051.835694 [1130] generic_netmap_attach Emulated adapter for bge1 created (prev was NULL) [...] 051.835725 [1035] generic_netmap_dtor Emulated netmap adapter for bge1 destroyed [...] 051.835760 [1130] generic_netmap_attach Emulated adapter for bge1 created (prev was NULL) [...] 051.835774 [1035] generic_netmap_dtor Emulated netmap adapter for bge1 destroyed [...] 051.835796 [1130] generic_netmap_attach Emulated adapter for bge1 created (prev was NULL) [...] 051.835811 [1035] generic_netmap_dtor Emulated netmap adapter for bge1 destroyed [...] bge1: permanently promiscuous mode enabled [...] 051.839175 [1130] generic_netmap_attach Emulated adapter for bge1 created (prev was NULL) [...] 052.050027 [ 320] generic_netmap_register Emulated adapter for bge1 activated