[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] CPU: Intel(R) Pentium(R) CPU G6950 @ 2.80GHz (2793.04-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x20652 Family=0x6 Model=0x25 Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x80e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,POPCNT> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8201773056 (7821 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HP ProLiant> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC-low" frequency 1396521960 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <HP ProLiant> on motherboard [...] acpi0: Power Button (fixed) [...] acpi0: _OSC failed: AE_BUFFER_OVERFLOW [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Event timer "HPET5" frequency 14318180 Hz quality 440 [...] Event timer "HPET6" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] mps0: <Avago Technologies (LSI) SAS2008> port 0x2000-0x20ff mem 0xdfb40000-0xdfb4ffff,0xdfb00000-0xdfb3ffff irq 16 at device 0.0 on pci1 [...] mps0: Firmware: XXX.XXX.XXX.XXX, Driver: XXX.XXX.XXX.XXX-fbsd [...] mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> [...] ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdfd02000-0xdfd023ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib2: failed to allocate initial I/O port window: 0-0xfff [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pcib3: failed to allocate initial I/O port window: 0-0xfff [...] pcib3: [GIANT-LOCKED] [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pcib4: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib4 [...] vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 18 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib5: [GIANT-LOCKED] [...] pci3: <ACPI PCI bus> on pcib5 [...] bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdfc00000-0xdfc0ffff irq 19 at device 0.0 on pci3 [...] bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E [...] miibus0: <MII bus> on bge0 [...] brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pcib6: failed to allocate initial I/O port window: 0-0xfff [...] pcib6: [GIANT-LOCKED] [...] ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdfd03000-0xdfd033ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib7 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Ibex Peak AHCI SATA controller> port 0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1800-0x181f mem 0xdfd04000-0xdfd047ff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xdf000-0xdffff pnpid ORM0000 on isa0 [...] sc0: <System console> at flags 0x100 on isa0 [...] sc0: VGA <16 virtual consoles, flags=0x300> [...] sc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/ada0s1a [rw]... [...] Root mount waiting for: CAM usbus0 usbus1 [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] Root mount waiting for: CAM usbus0 usbus1 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] ugen1.3: <ServerEngines SE USB Device> at usbus1 [...] ukbd0 on uhub2 [...] ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus1 [...] kbd0 at ukbd0 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <GB0250EAFYK HPG2> ATA-7 SATA 2.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 [...] ada1: <SAMSUNG HD204UI 1AQ10001> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 1907729MB (3907029168 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 [...] ada2: <SAMSUNG HD204UI 1AQ10001> ATA8-ACS SATA 2.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 1907729MB (3907029168 512 byte sectors) [...] ada2: quirks=0x1<4K> [...] ada3 at ahcich3 bus 0 scbus4 target 0 lun 0 [...] ada3: <SAMSUNG HD204UI 1AQ10001> ATA8-ACS SATA 2.x device [...] ada3: Serial Number... [...] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada3: Command Queueing enabled [...] ada3: 1907729MB (3907029168 512 byte sectors) [...] ada3: quirks=0x1<4K> [...] da2 at mps0 bus 0 scbus0 target 2 lun 0 [...] da2: <ATA ST4000VN008-2DR1 SC60> Fixed Direct Access SPC-4 SCSI device [...] da2: Serial Number... [...] da2: 600.000MB/s transfers [...] da2: Command Queueing enabled [...] da2: 3815447MB (7814037168 512 byte sectors) [...] da3 at mps0 bus 0 scbus0 target 3 lun 0 [...] da3: <ATA ST4000VN008-2DR1 SC60> Fixed Direct Access SPC-4 SCSI device [...] da3: Serial Number... [...] da3: 600.000MB/s transfers [...] da3: Command Queueing enabled [...] da3: 3815447MB (7814037168 512 byte sectors) [...] da0 at mps0 bus 0 scbus0 target 0 lun 0 [...] da0: <ATA HGST HUS724040AL AA70> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 600.000MB/s transfers [...] da0: Command Queueing enabled [...] da0: 3815447MB (7814037168 512 byte sectors) [...] da1 at mps0 bus 0 scbus0 target 1 lun 0 [...] da1: <ATA HGST HUS724040AL AA70> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 600.000MB/s transfers [...] da1: Command Queueing enabled [...] da1: 3815447MB (7814037168 512 byte sectors) [...] mountroot: waiting for device /dev/ada0s1a... [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] lo0: link state changed to UP [...] bge0: link state changed to DOWN [...] bge0: link state changed to UP [...] ums0 on uhub2 [...] ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus1 [...] ums0: 8 buttons and [XYZ] coordinates ID=0 [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ZFS WARNING: Unable to attach to da0. [...] ZFS WARNING: Unable to attach to da0. [...] ZFS WARNING: Unable to attach to da0. [...] ZFS WARNING: Unable to attach to da0. [...] ZFS WARNING: Unable to attach to da0. [...] ZFS WARNING: Unable to attach to da0. [...] ZFS WARNING: Unable to attach to da0. [...] ZFS WARNING: Unable to attach to da0.