[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906c0 Family=0x6 Model=0x9c Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8078049280 (7703 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x78d7b000-0x78d7b01e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x80600000-0x80601fff,0x80603000-0x806030ff,0x80602000-0x806027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x80500000-0x80503fff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80200000-0x802fffff,0x80300000-0x80303fff at device 0.0 on pci3 [...] igc0: EEPROM V2.14-0 eTrack 0x80000290 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80000000-0x800fffff,0x80100000-0x80103fff at device 0.0 on pci4 [...] igc1: EEPROM V2.14-0 eTrack 0x80000290 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x7fe00000-0x7fefffff,0x7ff00000-0x7ff03fff at device 0.0 on pci5 [...] igc2: EEPROM V2.14-0 eTrack 0x80000290 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x7fc00000-0x7fcfffff,0x7fd00000-0x7fd03fff at device 0.0 on pci6 [...] igc3: EEPROM V2.14-0 eTrack 0x80000290 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Jasper Lake HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1996803440 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 64MB host memory buffer [...] hdacc0: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <GV128 V0714C0 V3230208000323> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 122104MB (250069680 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Dual Console: Video Primary, Serial Secondary [...] pid 49 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] uhub0: 14 ports with 14 removable, self powered [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] kbd1 at ukbd0 [...] ugen0.3: <vendor 0x8087 product 0x0032> at usbus0 [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] iwlwifi0: <iwlwifi> mem 0x80400000-0x80403fff at device 0.0 on pci2 [...] iwlwifi0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000 [...] iwlwifi0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000 [...] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX210 160MHz [...] iwlwifi-ty-a0-gf-a0-89.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-89.ucode either [...] iwlwifi-ty-a0-gf-a0-89.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-89.ucode either [...] iwlwifi-ty-a0-gf-a0-89_ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-89_ucode either [...] iwlwifi_ty_a0_gf_a0_89_ucode: could not load binary firmware /boot/firmware/iwlwifi_ty_a0_gf_a0_89_ucode either [...] iwlwifi0: could not load firmware image 'iwlwifi-ty-a0-gf-a0-89.ucode' [...] iwlwifi0: File size way too small! [...] iwlwifi-ty-a0-gf-a0-88.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-88.ucode either [...] iwlwifi-ty-a0-gf-a0-88.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-88.ucode either [...] iwlwifi-ty-a0-gf-a0-88_ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-88_ucode either [...] iwlwifi_ty_a0_gf_a0_88_ucode: could not load binary firmware /boot/firmware/iwlwifi_ty_a0_gf_a0_88_ucode either [...] iwlwifi0: could not load firmware image 'iwlwifi-ty-a0-gf-a0-88.ucode' [...] iwlwifi0: File size way too small! [...] iwlwifi-ty-a0-gf-a0-87.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-87.ucode either [...] iwlwifi-ty-a0-gf-a0-87.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-87.ucode either [...] iwlwifi-ty-a0-gf-a0-87_ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-87_ucode either [...] iwlwifi_ty_a0_gf_a0_87_ucode: could not load binary firmware /boot/firmware/iwlwifi_ty_a0_gf_a0_87_ucode either [...] iwlwifi0: could not load firmware image 'iwlwifi-ty-a0-gf-a0-87.ucode' [...] iwlwifi0: File size way too small! [...] iwlwifi-ty-a0-gf-a0-86.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-86.ucode either [...] iwlwifi-ty-a0-gf-a0-86.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-86.ucode either [...] iwlwifi-ty-a0-gf-a0-86_ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-86_ucode either [...] iwlwifi_ty_a0_gf_a0_86_ucode: could not load binary firmware /boot/firmware/iwlwifi_ty_a0_gf_a0_86_ucode either [...] iwlwifi0: could not load firmware image 'iwlwifi-ty-a0-gf-a0-86.ucode' [...] iwlwifi0: File size way too small! [...] iwlwifi-ty-a0-gf-a0-85.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-85.ucode either [...] iwlwifi-ty-a0-gf-a0-85.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-85.ucode either [...] iwlwifi-ty-a0-gf-a0-85_ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-85_ucode either [...] iwlwifi_ty_a0_gf_a0_85_ucode: could not load binary firmware /boot/firmware/iwlwifi_ty_a0_gf_a0_85_ucode either [...] iwlwifi0: could not load firmware image 'iwlwifi-ty-a0-gf-a0-85.ucode' [...] iwlwifi0: File size way too small! [...] iwlwifi-ty-a0-gf-a0-84.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-84.ucode either [...] iwlwifi-ty-a0-gf-a0-84.ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-84.ucode either [...] iwlwifi-ty-a0-gf-a0-84_ucode: could not load binary firmware /boot/firmware/iwlwifi-ty-a0-gf-a0-84_ucode either [...] iwlwifi_ty_a0_gf_a0_84_ucode: could not load binary firmware /boot/firmware/iwlwifi_ty_a0_gf_a0_84_ucode either [...] iwlwifi0: could not load firmware image 'iwlwifi-ty-a0-gf-a0-84.ucode' [...] iwlwifi0: File size way too small! [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0-83.ucode' [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either [...] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either [...] iwl-debug-yoyo_bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo_bin either [...] iwl_debug_yoyo_bin: could not load binary firmware /boot/firmware/iwl_debug_yoyo_bin either [...] iwlwifi0: loaded firmware version 83.e8f84e98.0 ty-a0-gf-a0-83.ucode op_mode iwlmvm [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0.pnvm' [...] iwlwifi0: loaded PNVM version 181407b3 [...] iwlwifi0: Detected RF GF, rfid=0x10d000 [...] iwlwifi0: base HW address: XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] vlan0: changing name to 'vlan01' [...] vlan1: changing name to 'vlan02' [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'iwlwifi0_wlan1' [...] igc0: permanently promiscuous mode enabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 21 21 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz (1996.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906c0 Family=0x6 Model=0x9c Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8078045184 (7703 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x78d7b000-0x78d7b01e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x80600000-0x80601fff,0x80603000-0x806030ff,0x80602000-0x806027ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x80500000-0x80503fff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80200000-0x802fffff,0x80300000-0x80303fff at device 0.0 on pci3 [...] igc0: EEPROM V2.14-0 eTrack 0x80000290 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80000000-0x800fffff,0x80100000-0x80103fff at device 0.0 on pci4 [...] igc1: EEPROM V2.14-0 eTrack 0x80000290 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x7fe00000-0x7fefffff,0x7ff00000-0x7ff03fff at device 0.0 on pci5 [...] igc2: EEPROM V2.14-0 eTrack 0x80000290 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x7fc00000-0x7fcfffff,0x7fd00000-0x7fd03fff at device 0.0 on pci6 [...] igc3: EEPROM V2.14-0 eTrack 0x80000290 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Jasper Lake HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 1996803828 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvme0: Allocated 64MB host memory buffer [...] hdacc0: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa0: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <GV128 V0714C0 V3230208000323> [...] nda0: Serial Number... [...] nda0: nvme version 1.3 [...] nda0: 122104MB (250069680 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Dual Console: Video Primary, Serial Secondary [...] pid 49 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] uhub0: 14 ports with 14 removable, self powered