[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248071-cafeb6ce414 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (2700.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8179851264 (7800 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FY > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TC-FY> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ix0: <Intel(R) X540-AT2> mem 0xd0200000-0xd03fffff,0xd0404000-0xd0407fff at device 0.0 on pci1 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 4 RX queues 4 TX queues [...] ix0: Using MSI-X interrupts with 5 vectors [...] ix0: allocated for 4 queues [...] ix0: allocated for 4 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: eTrack 0x80000528 PHY FW V286 [...] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 [...] ix1: <Intel(R) X540-AT2> mem 0xd0000000-0xd01fffff,0xd0400000-0xd0403fff at device 0.1 on pci1 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 4 RX queues 4 TX queues [...] ix1: Using MSI-X interrupts with 5 vectors [...] ix1: allocated for 4 queues [...] ix1: allocated for 4 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: eTrack 0x80000528 PHY FW V286 [...] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf210000-0xdf21ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf228000-0xdf229fff,0xdf22c000-0xdf22c0ff,0xdf22b000-0xdf22b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xdf000000-0xdf000fff,0xd0600000-0xd0603fff irq 17 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x4c000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point HDA Controller> mem 0xdf220000-0xdf223fff,0xdf200000-0xdf20ffff at device 31.3 on pci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC-low" frequency 1356000663 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC662 rev3 (Front Analog)> at nid 27 and 25 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] Trying to mount root from ufs:/dev/ada0p8 [rw]... [...] Root mount waiting for: usbus0 CAM [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SD7SB6S256G1001 X3561001> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] uhub0: 20 ports with 20 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.2: <vendor 0x17ef Lenovo Black Silk USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <vendor 0x17ef Lenovo Black Silk USB Keyboard, class 0/0, rev 2.00/0.50, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x05e3 USB Storage> at usbus0 [...] umass0 on uhub0 [...] umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/9.03, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:5:0: Attached to scbus5 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 0903> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] mountroot: waiting for device /dev/ada0p8...