[...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain [...] (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 [...] (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted [...] umass0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE r366954 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz (1994.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fd Family=0x6 Model=0xf Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3928285184 (3746 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <Sony VAIO> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1994796168 Hz quality 1000 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: No AES or SHA support. [...] acpi0: <Sony> on motherboard [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe140-0xe147 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel GM45 SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 131068k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xd0400000-0xd04fffff at device 2.1 on pci0 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xe0e0-0xe0ff irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xe0c0-0xe0df irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xe0a0-0xe0bf irq 19 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604c00-0xd5604fff irq 19 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel 82801I HDA Controller> mem 0xd5600000-0xd5603fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci1: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel WiFi Link 5100> mem 0xd1900000-0xd1901fff irq 19 at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pcib4: failed to allocate initial memory window: 0xd0500000-0xd18fffff [...] pcib4: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib4 [...] mskc0: <Marvell Yukon 88E8055 Gigabit Ethernet> port 0xa000-0xa0ff irq 16 at device 0.0 on pci2 [...] msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xe080-0xe09f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0xe060-0xe07f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801I (ICH9) USB controller> port 0xe040-0xe05f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604800-0xd5604bff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] pci3: <serial bus, FireWire> at device 3.0 (no driver attached) [...] sdhci_pci0: <RICOH R5C822 SD> mem 0xd5500900-0xd55009ff irq 17 at device 3.1 on pci3 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH9M AHCI SATA controller> port 0xe130-0xe137,0xe120-0xe123,0xe110-0xe117,0xe100-0xe103,0xe020-0xe03f mem 0xd5604000-0xd56047ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,18 on hdaa0 [...] hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0 [...] unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) [...] hdacc2: <Intel Cantiga HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Cantiga Audio Function Group> at nid 1 on hdacc2 [...] pcm1: <Intel Cantiga (HDMI 8ch)> at nid 3 on hdaa1 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub3: ugen2.1: <Intel UHCI root HUB> at usbus2 [...] <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM [...] uhub7: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 usbus7 CAM [...] Root mount waiting for: usbus3 usbus7 CAM [...] uhub0: 6 ports with 6 removable, self powered [...] uhub6: 6 ports with 6 removable, self powered [...] ugen3.2: <Ricoh co. Ltd. product 0x183d> at usbus3 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ugen6.2: <Broadcom Corp BCM2046 Bluetooth Device> at usbus6 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ahcich1: Timeout on slot 6 port 0 [...] ahcich1: is 00000000 cs 00000000 ss 00000000 rs 00000040 tfd 50 serr 00000000 cmd 0000c617 [...] (aprobe1:ahcich1:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 42 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: Command timeout [...] (aprobe1:ahcich1:0:0:0): Retrying command, 0 more tries remain [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 PRO 512GB EXM02B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PIONEER DVD-RW DVRTD08 1.00> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) [...] cd0: 1443MB (738928 2048 byte sectors) [...] GEOM_PART: integrity check failed (cd0, MBR) [...] GEOM_PART: integrity check failed (iso9660/Ubuntu%2016.04.1%20LTS%20amd64, MBR) [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: software [...] lo0: link state changed to UP [...] msk0: link state changed to DOWN [...] msk0: link state changed to UP [...] ubt0 on uhub1 [...] ubt0: <Broadcom Corp BCM2046 Bluetooth Device, class 224/1, rev 2.00/2.27, addr 2> on usbus6 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 1h2m12s [...] GEOM_ELI: Device ada0p3.eli destroyed. [...] GEOM_ELI: Detached ada0p3.eli on last close. [...] ubt0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] module iwn already present! [...] CPU: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz (1994.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fd Family=0x6 Model=0xf Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3924238336 (3742 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <Sony VAIO> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1994797272 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: No AES or SHA support. [...] acpi0: <Sony> on motherboard [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe140-0xe147 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel GM45 SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 131068k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xd0400000-0xd04fffff at device 2.1 on pci0 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xe0e0-0xe0ff irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x3f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xe0c0-0xe0df irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xe0a0-0xe0bf irq 19 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604c00-0xd5604fff irq 19 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel 82801I HDA Controller> mem 0xd5600000-0xd5603fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci1: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel WiFi Link 5100> mem 0xd1900000-0xd1901fff irq 19 at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pcib4: failed to allocate initial memory window: 0xd0500000-0xd18fffff [...] pcib4: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib4 [...] mskc0: <Marvell Yukon 88E8055 Gigabit Ethernet> port 0xa000-0xa0ff irq 16 at device 0.0 on pci2 [...] msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xe080-0xe09f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0xe060-0xe07f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801I (ICH9) USB controller> port 0xe040-0xe05f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604800-0xd5604bff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] fwohci0: <1394 Open Host Controller Interface> mem 0xd5500000-0xd55007ff irq 16 at device 3.0 on pci3 [...] fwohci0: OHCI version 1.0 (ROM=1) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 1 ports. [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwohci_intr_core: BUS reset [...] fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB [...] fwohci0: PhysicalUpperBound = 0x00000000 [...] fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode [...] firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [...] firewire0: bus manager 0 [...] sdhci_pci0: <RICOH R5C822 SD> mem 0xd5500900-0xd55009ff irq 17 at device 3.1 on pci3 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH9M AHCI SATA controller> port 0xe130-0xe137,0xe120-0xe123,0xe110-0xe117,0xe100-0xe103,0xe020-0xe03f mem 0xd5604000-0xd56047ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,18 on hdaa0 [...] hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0 [...] unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) [...] hdacc2: <Intel Cantiga HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Cantiga Audio Function Group> at nid 1 on hdacc2 [...] pcm1: <Intel Cantiga (HDMI 8ch)> at nid 3 on hdaa1 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 PRO 512GB EXM02B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] uhub0: 6 ports with 6 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] ugen3.2: <Ricoh co. Ltd. product 0x183d> at usbus3 [...] ugen6.2: <Broadcom Corp BCM2046 Bluetooth Device> at usbus6 [...] ubt0 on uhub4 [...] ubt0: <Broadcom Corp BCM2046 Bluetooth Device, class 224/1, rev 2.00/2.27, addr 2> on usbus6 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PIONEER DVD-RW DVRTD08 1.00> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) [...] cd0: 1443MB (738928 2048 byte sectors) [...] GEOM_PART: integrity check failed (cd0, MBR) [...] GEOM_PART: integrity check failed (iso9660/Ubuntu%2016.04.1%20LTS%20amd64, MBR) [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: software [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [...] [drm] Got stolen memory base 0xb8000000, size 0x8000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] RC6 disabled, disabling runtime PM support [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1600 depth=32 [...] cmsize=16 size=5763072 [...] pbase=0xc0047000 vbase=0xfffff800c0047000 [...] name=drmn0 flags=0x0 stride=6400 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] msk0: link state changed to DOWN [...] msk0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x08530501 [...] wlan0: link state changed to UP [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 21m39s [...] GEOM_ELI: Device ada0p3.eli destroyed. [...] GEOM_ELI: Detached ada0p3.eli on last close. [...] ubt0: detached [...] ugen0.2: <Ricoh co. Ltd. product 0x183d> at usbus0 [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] module iwn already present! [...] CPU: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz (1994.81-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fd Family=0x6 Model=0xf Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3924238336 (3742 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <Sony VAIO> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1994805252 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: No AES or SHA support. [...] acpi0: <Sony> on motherboard [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe140-0xe147 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel GM45 SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 131068k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xd0400000-0xd04fffff at device 2.1 on pci0 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xe0e0-0xe0ff irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x3f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xe0c0-0xe0df irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xe0a0-0xe0bf irq 19 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604c00-0xd5604fff irq 19 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel 82801I HDA Controller> mem 0xd5600000-0xd5603fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci1: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel WiFi Link 5100> mem 0xd1900000-0xd1901fff irq 19 at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pcib4: failed to allocate initial memory window: 0xd0500000-0xd18fffff [...] pcib4: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib4 [...] mskc0: <Marvell Yukon 88E8055 Gigabit Ethernet> port 0xa000-0xa0ff irq 16 at device 0.0 on pci2 [...] msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xe080-0xe09f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0xe060-0xe07f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801I (ICH9) USB controller> port 0xe040-0xe05f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604800-0xd5604bff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] fwohci0: <1394 Open Host Controller Interface> mem 0xd5500000-0xd55007ff irq 16 at device 3.0 on pci3 [...] fwohci0: OHCI version 1.0 (ROM=1) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 1 ports. [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwohci_intr_core: BUS reset [...] fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB [...] fwohci0: PhysicalUpperBound = 0x00000000 [...] fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode [...] firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [...] firewire0: bus manager 0 [...] sdhci_pci0: <RICOH R5C822 SD> mem 0xd5500900-0xd55009ff irq 17 at device 3.1 on pci3 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH9M AHCI SATA controller> port 0xe130-0xe137,0xe120-0xe123,0xe110-0xe117,0xe100-0xe103,0xe020-0xe03f mem 0xd5604000-0xd56047ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,18 on hdaa0 [...] hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0 [...] unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) [...] hdacc2: <Intel Cantiga HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Cantiga Audio Function Group> at nid 1 on hdacc2 [...] pcm1: <Intel Cantiga (HDMI 8ch)> at nid 3 on hdaa1 [...] uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 usbus7 CAM [...] Root mount waiting for: usbus3 usbus7 CAM [...] uhub0: 6 ports with 6 removable, self powered [...] uhub7: 6 ports with 6 removable, self powered [...] ugen3.2: <Ricoh co. Ltd. product 0x183d> at usbus3 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ugen6.2: <Broadcom Corp BCM2046 Bluetooth Device> at usbus6 [...] ubt0 on uhub2 [...] ubt0: <Broadcom Corp BCM2046 Bluetooth Device, class 224/1, rev 2.00/2.27, addr 2> on usbus6 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ahcich1: Timeout on slot 6 port 0 [...] ahcich1: is 00000000 cs 00000000 ss 00000000 rs 00000040 tfd 50 serr 00000000 cmd 0000c617 [...] (aprobe1:ahcich1:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 42 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: Command timeout [...] (aprobe1:ahcich1:0:0:0): Retrying command, 0 more tries remain [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 PRO 512GB EXM02B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PIONEER DVD-RW DVRTD08 1.00> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) [...] cd0: 1443MB (738928 2048 byte sectors) [...] GEOM_PART: integrity check failed (cd0, MBR) [...] GEOM_PART: integrity check failed (iso9660/Ubuntu%2016.04.1%20LTS%20amd64, MBR) [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: software [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [...] [drm] Got stolen memory base 0xb8000000, size 0x8000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] RC6 disabled, disabling runtime PM support [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1600 depth=32 [...] cmsize=16 size=5763072 [...] pbase=0xc0047000 vbase=0xfffff800c0047000 [...] name=drmn0 flags=0x0 stride=6400 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] msk0: link state changed to DOWN [...] iwn0: iwn_read_firmware: ucode rev=0x08530501 [...] wlan0: link state changed to UP [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] msk0: link state changed to UP [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] Uptime: 5m13s [...] GEOM_ELI: Device ada0p3.eli destroyed. [...] GEOM_ELI: Detached ada0p3.eli on last close. [...] ubt0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] module iwn already present! [...] CPU: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz (1994.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fd Family=0x6 Model=0xf Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3924238336 (3742 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <Sony VAIO> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1994798460 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: No AES or SHA support. [...] acpi0: <Sony> on motherboard [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe140-0xe147 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel GM45 SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 131068k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xd0400000-0xd04fffff at device 2.1 on pci0 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xe0e0-0xe0ff irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x3f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xe0c0-0xe0df irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xe0a0-0xe0bf irq 19 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604c00-0xd5604fff irq 19 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel 82801I HDA Controller> mem 0xd5600000-0xd5603fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci1: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel WiFi Link 5100> mem 0xd1900000-0xd1901fff irq 19 at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pcib4: failed to allocate initial memory window: 0xd0500000-0xd18fffff [...] pcib4: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib4 [...] mskc0: <Marvell Yukon 88E8055 Gigabit Ethernet> port 0xa000-0xa0ff irq 16 at device 0.0 on pci2 [...] msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xe080-0xe09f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0xe060-0xe07f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801I (ICH9) USB controller> port 0xe040-0xe05f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604800-0xd5604bff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] fwohci0: <1394 Open Host Controller Interface> mem 0xd5500000-0xd55007ff irq 16 at device 3.0 on pci3 [...] fwohci0: OHCI version 1.0 (ROM=1) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 1 ports. [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwohci_intr_core: BUS reset [...] fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB [...] fwohci0: PhysicalUpperBound = 0x00000000 [...] fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode [...] firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [...] firewire0: bus manager 0 [...] sdhci_pci0: <RICOH R5C822 SD> mem 0xd5500900-0xd55009ff irq 17 at device 3.1 on pci3 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH9M AHCI SATA controller> port 0xe130-0xe137,0xe120-0xe123,0xe110-0xe117,0xe100-0xe103,0xe020-0xe03f mem 0xd5604000-0xd56047ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,18 on hdaa0 [...] hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0 [...] unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) [...] hdacc2: <Intel Cantiga HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Cantiga Audio Function Group> at nid 1 on hdacc2 [...] pcm1: <Intel Cantiga (HDMI 8ch)> at nid 3 on hdaa1 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM [...] uhub7: 2 ports with 2 removable, self powered [...] uhub6: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 usbus7 CAM [...] Root mount waiting for: usbus3 usbus7 CAM [...] uhub0: 6 ports with 6 removable, self powered [...] uhub5: 6 ports with 6 removable, self powered [...] ugen3.2: <Ricoh co. Ltd. product 0x183d> at usbus3 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ugen6.2: <Broadcom Corp BCM2046 Bluetooth Device> at usbus6 [...] ubt0 on uhub1 [...] ubt0: <Broadcom Corp BCM2046 Bluetooth Device, class 224/1, rev 2.00/2.27, addr 2> on usbus6 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ahcich1: Timeout on slot 6 port 0 [...] ahcich1: is 00000000 cs 00000000 ss 00000000 rs 00000040 tfd 50 serr 00000000 cmd 0000c617 [...] (aprobe1:ahcich1:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 42 00 [...] (aprobe1:ahcich1:0:0:0): CAM status: Command timeout [...] (aprobe1:ahcich1:0:0:0): Retrying command, 0 more tries remain [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 PRO 512GB EXM02B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PIONEER DVD-RW DVRTD08 1.00> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) [...] cd0: 1443MB (738928 2048 byte sectors) [...] GEOM_PART: integrity check failed (cd0, MBR) [...] GEOM_PART: integrity check failed (iso9660/Ubuntu%2016.04.1%20LTS%20amd64, MBR) [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: software [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [...] [drm] Got stolen memory base 0xb8000000, size 0x8000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] RC6 disabled, disabling runtime PM support [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1600 depth=32 [...] cmsize=16 size=5763072 [...] pbase=0xc0047000 vbase=0xfffff800c0047000 [...] name=drmn0 flags=0x0 stride=6400 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] msk0: link state changed to DOWN [...] msk0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x08530501 [...] wlan0: link state changed to UP [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on msk0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on msk0 [...] pid 1559 (python3.7), jid 0, uid 0: exited on signal 5 (core dumped) [...] pid 1552 (sudo), jid 0, uid 0: exited on signal 5 [...] pid 2463 (remmina), jid 0, uid 1001: exited on signal 5 (core dumped) [...] pid 4095 (drkonqi), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 4096 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] pid 4098 (baloo_file_extracto), jid 0, uid 1001: exited on signal 6 (core dumped) [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] All buffers synced. [...] Uptime: 39m3s [...] GEOM_ELI: Device ada0p3.eli destroyed. [...] GEOM_ELI: Detached ada0p3.eli on last close. [...] ubt0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] module iwn already present! [...] CPU: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz (1994.80-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fd Family=0x6 Model=0xf Stepping=13 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3924238336 (3742 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <Sony VAIO> [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] Timecounter "TSC" frequency 1994800584 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000019 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 [...] kbd1 at kbdmux0 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: No AES or SHA support. [...] acpi0: <Sony> on motherboard [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe140-0xe147 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] agp0: <Intel GM45 SVGA controller> on vgapci0 [...] agp0: aperture size is 256M, detected 131068k stolen memory [...] vgapci0: Boot video device [...] vgapci1: <VGA-compatible display> mem 0xd0400000-0xd04fffff at device 2.1 on pci0 [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xe0e0-0xe0ff irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x3f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xe0c0-0xe0df irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xe0a0-0xe0bf irq 19 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604c00-0xd5604fff irq 19 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel 82801I HDA Controller> mem 0xd5600000-0xd5603fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib1: [GIANT-LOCKED] [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci1: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel WiFi Link 5100> mem 0xd1900000-0xd1901fff irq 19 at device 0.0 on pci1 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pcib4: failed to allocate initial memory window: 0xd0500000-0xd18fffff [...] pcib4: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib4 [...] mskc0: <Marvell Yukon 88E8055 Gigabit Ethernet> port 0xa000-0xa0ff irq 16 at device 0.0 on pci2 [...] msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 [...] msk0: Using defaults for TSO: 65518/35/2048 [...] msk0: Ethernet address: ... [...] miibus0: <MII bus> on msk0 [...] e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 [...] e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xe080-0xe09f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801I (ICH9) USB controller> port 0xe060-0xe07f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801I (ICH9) USB controller> port 0xe040-0xe05f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd5604800-0xd5604bff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib5 [...] fwohci0: <1394 Open Host Controller Interface> mem 0xd5500000-0xd55007ff irq 16 at device 3.0 on pci3 [...] fwohci0: OHCI version 1.0 (ROM=1) [...] fwohci0: No. of Isochronous channels is 4. [...] fwohci0: EUI64 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX [...] fwohci0: Phy 1394a available S400, 1 ports. [...] fwohci0: Link S400, max_rec 2048 bytes. [...] firewire0: <IEEE1394(FireWire) bus> on fwohci0 [...] fwohci0: Initiate bus reset [...] fwohci0: fwohci_intr_core: BUS reset [...] fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB [...] fwohci0: PhysicalUpperBound = 0x00000000 [...] fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode [...] firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [...] firewire0: bus manager 0 [...] sdhci_pci0: <RICOH R5C822 SD> mem 0xd5500900-0xd55009ff irq 17 at device 3.1 on pci3 [...] sdhci_pci0: 1 slot(s) allocated [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH9M AHCI SATA controller> port 0xe130-0xe137,0xe120-0xe123,0xe110-0xe117,0xe100-0xe103,0xe020-0xe03f mem 0xd5604000-0xd56047ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model GlidePoint, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,18 on hdaa0 [...] hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0 [...] unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) [...] hdacc2: <Intel Cantiga HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Cantiga Audio Function Group> at nid 1 on hdacc2 [...] pcm1: <Intel Cantiga (HDMI 8ch)> at nid 3 on hdaa1 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <Samsung SSD 850 PRO 512GB EXM02B6Q> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 488386MB (1000215216 512 byte sectors) [...] ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <PIONEER DVD-RW DVRTD08 1.00> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) [...] cd0: 1443MB (738928 2048 byte sectors) [...] uhub6: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] GEOM_PART: integrity check failed (cd0, MBR) [...] uhub1: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] GEOM_PART: integrity check failed (iso9660/Ubuntu%2016.04.1%20LTS%20amd64, MBR) [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: software [...] Root mount waiting for: usbus3 [...] ugen3.2: <Ricoh co. Ltd. product 0x183d> at usbus3 [...] ugen6.2: <Broadcom Corp BCM2046 Bluetooth Device> at usbus6 [...] ubt0 on uhub0 [...] ubt0: <Broadcom Corp BCM2046 Bluetooth Device, class 224/1, rev 2.00/2.27, addr 2> on usbus6 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [...] [drm] Got stolen memory base 0xb8000000, size 0x8000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] RC6 disabled, disabling runtime PM support [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=900 width=1600 depth=32 [...] cmsize=16 size=5763072 [...] pbase=0xc0047000 vbase=0xfffff800c0047000 [...] name=drmn0 flags=0x0 stride=6400 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] msk0: link state changed to DOWN [...] msk0: link state changed to UP [...] iwn0: iwn_read_firmware: ucode rev=0x08530501 [...] wlan0: link state changed to UP [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] pid 2518 (nautilus), jid 0, uid 1001: exited on signal 5 (core dumped) [...] ugen4.2: <Logitech Logitech USB Optical Mouse> at usbus4 [...] ums0 on uhub3 [...] ums0: <Logitech Logitech USB Optical Mouse, class 0/0, rev 2.00/43.00, addr 2> on usbus4 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] pid 4471 (cairo-dock), jid 0, uid 1001: exited on signal 11 (core dumped) [...] msk0: promiscuous mode enabled [...] msk0: promiscuous mode disabled [...] msk0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on msk0 [...] msk0: promiscuous mode disabled