[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE stable/22.7-n250212-a26d6065f1f SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz (2793.84-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24536068096 (23399 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-G5 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 5 4 2 6 7 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf00e0-0xf00fe [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TP-G5> [...] acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xf0000000-0xf0ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 [...] vgapci1: <VGA-compatible display> port 0x6000-0x603f mem 0xf1400000-0xf17fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci1: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf3a20000-0xf3a2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0x60b0-0x60b7 mem 0xf3a3c000-0xf3a3cfff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0x6080-0x609f mem 0xf3a00000-0xf3a1ffff,0xf3a3b000-0xf3a3bfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf3a3a000-0xf3a3a3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf3a30000-0xf3a33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] sdhci_pci0: <RICOH R5CE823 SD> mem 0xf3101000-0xf31010ff irq 16 at device 0.0 on pci2 [...] sdhci_pci0: 1 slot(s) allocated [...] pci2: <serial bus, FireWire> at device 0.3 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Ultimate-N 6300> mem 0xf3000000-0xf3001fff irq 17 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf3a39000-0xf3a393ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0x60a8-0x60af,0x60bc-0x60bf,0x60a0-0x60a7,0x60b8-0x60bb,0x6060-0x607f mem 0xf3a38000-0xf3a387ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model Synaptics Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1396826250 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa0 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] uhub2: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 CAM [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device PNY USB 3.2.1 FD (0x154b:0x1006) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device PNY USB 3.2.1 FD (0x154b:0x1006) [...] ugen0.2: <PNY USB 3.2.1 FD> at usbus0 [...] umass0 on uhub1 [...] umass0: <PNY USB 3.2.1 FD, class 0/0, rev 2.10/1.10, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:4:0: Attached to scbus4 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 usbus2 CAM [...] ugen1.3: <Auth Biometric Coprocessor> at usbus1 [...] ugen2.3: <vendor 0x0765 product 0x5010> at usbus2 [...] ugen1.4: <Broadcom Corp BCM20702A0> at usbus1 [...] ugen1.5: <Chicony Electronics Co., Ltd. Integrated Camera> at usbus1 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD3200BEKX-75B7WT0 01.01A01> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <MATSHITA DVD-RAM UJ8C0 SB01> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 [...] da0: <PNY USB 3.2.1 FD PMAP> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 118236MB (242147328 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xefa0-0xefbf mem 0xf3a34000-0xf3a340ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] uhid0 on uhub3 [...] uhid0: <vendor 0x0765 product 0x5010, class 0/0, rev 2.00/0.00, addr 3> on usbus2 [...] ubt0 on uhub4 [...] ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 4> on usbus1 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'iwn0_wlan0' [...] iwn0: iwn_read_firmware: ucode rev=0x09dd0401 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 umass0: detached [...] 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE stable/22.7-n250212-a26d6065f1f SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz (2793.75-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24536068096 (23399 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-G5 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 5 6 4 7 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf00e0-0xf00fe [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TP-G5> [...] acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xf0000000-0xf0ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 [...] vgapci1: <VGA-compatible display> port 0x6000-0x603f mem 0xf1400000-0xf17fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci1: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf3a20000-0xf3a2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0x60b0-0x60b7 mem 0xf3a3c000-0xf3a3cfff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0x6080-0x609f mem 0xf3a00000-0xf3a1ffff,0xf3a3b000-0xf3a3bfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf3a3a000-0xf3a3a3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf3a30000-0xf3a33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] sdhci_pci0: <RICOH R5CE823 SD> mem 0xf3101000-0xf31010ff irq 16 at device 0.0 on pci2 [...] sdhci_pci0: 1 slot(s) allocated [...] pci2: <serial bus, FireWire> at device 0.3 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Ultimate-N 6300> mem 0xf3000000-0xf3001fff irq 17 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf3a39000-0xf3a393ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0x60a8-0x60af,0x60bc-0x60bf,0x60a0-0x60a7,0x60b8-0x60bb,0x6060-0x607f mem 0xf3a38000-0xf3a387ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model Synaptics Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1396827067 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD3200BEKX-75B7WT0 01.01A01> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <MATSHITA DVD-RAM UJ8C0 SB01> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus1 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <Auth Biometric Coprocessor> at usbus1 [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.3: <vendor 0x0765 product 0x5010> at usbus2 [...] ugen1.4: <Broadcom Corp BCM20702A0> at usbus1 [...] ugen1.5: <Chicony Electronics Co., Ltd. Integrated Camera> at usbus1 [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xefa0-0xefbf mem 0xf3a34000-0xf3a340ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] uhid0 on uhub3 [...] uhid0: <vendor 0x0765 product 0x5010, class 0/0, rev 2.00/0.00, addr 3> on usbus2 [...] ubt0 on uhub4 [...] ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 4> on usbus1 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] wlan0: Ethernet address: ... [...] wlan0: changing name to 'iwn0_wlan0' [...] iwn0: iwn_read_firmware: ucode rev=0x09dd0401 [...] em0: link state changed to UP [...] iwn0_wlan0: link state changed to UP [...] iwn0_wlan0: link state changed to DOWN [...] iwn0_wlan0: link state changed to UP [...] iwn0_wlan0: link state changed to DOWN [...] iwn0_wlan0: link state changed to UP [...] iwn0_wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 81 2 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p2 stable/22.7-n250229-c8a7fd0d5dc SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz (2793.83-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 25769803776 (24576 MB) [...] avail memory = 24536068096 (23399 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-G5 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 4 2 6 5 3 7 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf00e0-0xf00fe [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TP-G5> [...] acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xf0000000-0xf0ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 [...] vgapci1: <VGA-compatible display> port 0x6000-0x603f mem 0xf1400000-0xf17fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci1: Boot video device [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf3a20000-0xf3a2ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel Panther Point KT Controller> port 0x60b0-0x60b7 mem 0xf3a3c000-0xf3a3cfff irq 19 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) 82579LM> port 0x6080-0x609f mem 0xf3a00000-0xf3a1ffff,0xf3a3b000-0xf3a3bfff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-3 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf3a3a000-0xf3a3a3ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf3a30000-0xf3a33fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] sdhci_pci0: <RICOH R5CE823 SD> mem 0xf3101000-0xf31010ff irq 16 at device 0.0 on pci2 [...] sdhci_pci0: 1 slot(s) allocated [...] pci2: <serial bus, FireWire> at device 0.3 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Ultimate-N 6300> mem 0xf3000000-0xf3001fff irq 17 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf3a39000-0xf3a393ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0x60a8-0x60af,0x60bc-0x60bf,0x60a0-0x60a7,0x60b8-0x60bb,0x6060-0x607f mem 0xf3a38000-0xf3a387ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. [...] psm0: model Synaptics Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1396826836 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa0 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub2 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD3200BEKX-75B7WT0 01.01A01> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 305245MB (625142448 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0 [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <MATSHITA DVD-RAM UJ8C0 SB01> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] uhub1: 8 ports with 8 removable, self powered [...] uhub2: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus1 usbus2 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <Auth Biometric Coprocessor> at usbus1 [...] Root mount waiting for: usbus1 usbus2 [...] ugen2.3: <vendor 0x0765 product 0x5010> at usbus2 [...] ugen1.4: <Broadcom Corp BCM20702A0> at usbus1 [...] ugen1.5: <Chicony Electronics Co., Ltd. Integrated Camera> at usbus1