[...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE r354233 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (3392.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16535449600 (15769 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] arc4random: no preloaded entropy cache [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1696108074 Hz quality 1000 [...] random: entropy device external interface [...] md0: Preloaded image </data/XXXXXXXXXXXX 14417920 bytes at 0xffffffff82a0b9a8 [...] 000.000077 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <ALASKA A M I> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA GT108 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7220000-0xf722ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 0xf7200000-0xf721ffff,0xf7237000-0xf7237fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7230000-0xf7233fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7100000-0xf7101fff irq 17 at device 0.0 on pci3 [...] xhci1: 64 bytes context size, 32-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4 [...] pci5: <ACPI PCI bus> on pcib5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7236000-0xf72367ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. [...] Consider tuning vm.kmem_size and vm.kmem_size_max [...] in /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] arc4random: no preloaded entropy cache [...] hdacc0: <NVIDIA GT440 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <NVIDIA GT440 HDA CODEC> at cad 1 on hdac0 [...] hdaa1: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] hdacc2: <NVIDIA GT440 HDA CODEC> at cad 2 on hdac0 [...] hdaa2: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc2 [...] pcm2: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa2 [...] hdacc3: <NVIDIA GT440 HDA CODEC> at cad 3 on hdac0 [...] hdaa3: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc3 [...] pcm3: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa3 [...] hdacc4: <Realtek ALC892 HDA CODEC> at cad 2 on hdac1 [...] hdaa4: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc4 [...] pcm4: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa4 [...] pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa4 [...] pcm6: <Realtek ALC892 (Onboard Digital)> at nid 17 and 31 on hdaa4 [...] pcm7: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa4 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <0x1912 XHCI root HUB> at usbus1 [...] uhub1: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <IR-SSDPR-S25A-240 SBFM91.3> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <M4-CT128M4SSD2 070H> ACS-2 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 122103MB (250067567 512 byte sectors) [...] ada1: quirks=0x1<4K> [...] ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] ada2: <WDC WDS100T2B0A-00SM50 401000WD> ACS-4 ATA SATA 3.x device [...] ada2: Serial Number... [...] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada2: Command Queueing enabled [...] ada2: 953869MB (1953525168 512 byte sectors) [...] Trying to mount root from ufs:/dev/md0 []... [...] Root mount waiting for: usbus1 usbus0 [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.2: <Verbatim STORE N GO> at usbus0 [...] umass0 on uhub0 [...] umass0: <Verbatim STORE N GO, class 0/0, rev 2.00/1.10, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Verbatim STORE N GO 5.00> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 3935MB (8058880 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT table is corrupt or invalid. [...] GEOM: da0: using the primary only -- recovery suggested. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] ugen0.3: <vendor 0x045b product 0x0209> at usbus0 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x045b product 0x0209, class 9/0, rev 2.10/1.00, addr 2> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub2: 4 ports with 4 removable, self powered [...] ugen0.4: <GenesysLogic USB2.1 Hub> at usbus0 [...] uhub3 on uhub2 [...] uhub3: <GenesysLogic USB2.1 Hub, class 9/0, rev 2.10/6.54, addr 3> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub3: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.5: <SINO WEALTH Gaming KB> at usbus0 [...] ukbd0 on uhub3 [...] ukbd0: <SINO WEALTH Gaming KB, class 0/0, rev 1.10/12.91, addr 4> on usbus0 [...] kbd2 at ukbd0 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] ukbd1 on uhub3 [...] ukbd1: <SINO WEALTH Gaming KB, class 0/0, rev 1.10/12.91, addr 4> on usbus0 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] hid_get_item: Number of items(1920) truncated to 1024 [...] kbd3 at ukbd1 [...] ugen0.6: <vendor 0x045b product 0x0209> at usbus0 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x045b product 0x0209, class 9/0, rev 2.10/1.00, addr 5> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub4: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.7: <vendor 0x0424 product 0x2504> at usbus0 [...] uhub5 on uhub4 [...] uhub5: <vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.01, addr 6> on usbus0 [...] uhub5: MTT enabled [...] uhub5: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.8: <vendor 0x0a12 CSR8510 A10> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.9: <Dell Dell Universal Receiver> at usbus0 [...] ukbd2 on uhub5 [...] ukbd2: <Dell Dell Universal Receiver, class 0/0, rev 2.00/11.19, addr 8> on usbus0 [...] kbd4 at ukbd2 [...] ugen0.10: <vendor 0x045b product 0x0210> at usbus0 [...] uhub6 on uhub0 [...] uhub6: <vendor 0x045b product 0x0210, class 9/0, rev 3.00/1.00, addr 9> on usbus0 [...] Root mount waiting for: usbus0 [...] uhub6: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.11: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub7 on uhub6 [...] uhub7: <GenesysLogic> on usbus0 [...] uhub7: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus0 [...] ugen0.12: <vendor 0x045b product 0x0210> at usbus0 [...] uhub8 on uhub0 [...] uhub8: <vendor 0x045b product 0x0210, class 9/0, rev 3.00/1.00, addr 11> on usbus0 [...] uhub8: 4 ports with 4 removable, self powered [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] Trying to mount root from zfs:livecd []... [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] ubt0 on uhub5 [...] ubt0: <vendor 0x0a12 CSR8510 A10, class 224/1, rev 2.00/88.91, addr 7> on usbus0 [...] ums0 on uhub5 [...] ums0: <Dell Dell Universal Receiver, class 0/0, rev 2.00/11.19, addr 8> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] uhid0 on uhub5 [...] uhid0: <Dell Dell Universal Receiver, class 0/0, rev 2.00/11.19, addr 8> on usbus0 [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ubt0: ubt_bulk_read_callback:1103: bulk-in transfer failed: USB_ERR_STALLED [...] interface fusefs.1 already present in the KLD 'fuse.ko'! [...] linker_load_file: /boot/kernel/fusefs.ko - unsupported file type [...] WARNING: autofs_trigger_one: request for /net/ completed with error 5 [...] WARNING: autofs_trigger_one: request for /net/ completed with error 5 [...] WARNING: autofs_trigger_one: request for /net/ completed with error 5 [...] WARNING: autofs_trigger_one: request for /net/ completed with error 5 [...] WARNING: autofs_trigger_one: request for /net/ completed with error 5 [...] WARNING: autofs_trigger_one: request for /net/ completed with error 5