[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267796-c61a3c23fb1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (2166.76-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8155222016 (7777 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0915000-0xd09157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0900000-0xd090ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0910000-0xd0913fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xd0804000-0xd0804fff,0xd0800000-0xd0803fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Advanced-N 6205> mem 0xd0700000-0xd0701fff irq 18 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xd0604000-0xd0604fff,0xd0600000-0xd0603fff irq 19 at device 0.0 on pci4 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Sleep Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1083333159 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Analog)> at nid 27 and 24,25 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <GOFATOO SSD SN13200> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0914000-0xd091401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] re0: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] pid 60679 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] re1: promiscuous mode enabled [...] 110.986788 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 110.986829 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] 110.986890 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 110.986923 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] 110.986971 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 110.987004 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] pppoe0: permanently promiscuous mode enabled [...] 110.996566 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 111.633832 [ 319] generic_netmap_register Emulated adapter for pppoe0 activated [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] pid 31312 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 58000 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 58069 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 58133 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 76227 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 75851 (sudo), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] pid 79512 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 96188 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 6007 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 28716 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 48093 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 49687 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] pid 49217 (sudo), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] re1: promiscuous mode disabled [...] 400.445162 [ 294] generic_netmap_unregister Emulated adapter for pppoe0 deactivated [...] 400.447876 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 2h39m26s [...] ukbd0: detached [...] ums0: detached [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267796-c61a3c23fb1 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (2166.76-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8155222016 (7777 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0915000-0xd09157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0900000-0xd090ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0910000-0xd0913fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xd0804000-0xd0804fff,0xd0800000-0xd0803fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Advanced-N 6205> mem 0xd0700000-0xd0701fff irq 18 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xd0604000-0xd0604fff,0xd0600000-0xd0603fff irq 19 at device 0.0 on pci4 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Sleep Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1083333211 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Analog)> at nid 27 and 24,25 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <GOFATOO SSD SN13200> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0914000-0xd091401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] re0: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] pid 83150 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] re1: promiscuous mode enabled [...] 749.367359 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 749.367402 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] 749.367465 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 749.367498 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] 749.367546 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 749.367578 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] pppoe0: permanently promiscuous mode enabled [...] 749.377022 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 750.008786 [ 319] generic_netmap_register Emulated adapter for pppoe0 activated [...] pid 77008 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] re1: promiscuous mode disabled [...] 318.223593 [ 294] generic_netmap_unregister Emulated adapter for pppoe0 deactivated [...] 318.226328 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 done [...] All buffers synced. [...] Uptime: 3d21h51m37s [...] ukbd0: detached [...] ums0: detached [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267802-bc5627fc5f3 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (2166.76-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8155217920 (7777 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0915000-0xd09157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0900000-0xd090ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0910000-0xd0913fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xd0804000-0xd0804fff,0xd0800000-0xd0803fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Advanced-N 6205> mem 0xd0700000-0xd0701fff irq 18 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xd0604000-0xd0604fff,0xd0600000-0xd0603fff irq 19 at device 0.0 on pci4 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Sleep Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1083333064 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Analog)> at nid 27 and 24,25 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <GOFATOO SSD SN13200> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered [...] ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0914000-0xd091401f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub0 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] ums0: 16 buttons and [XYZT] coordinates ID=2 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] re0: link state changed to UP [...] ng0: changing name to 'pppoe0' [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] ng_pppoe[e]: no matching session [...] pid 84832 (freshclam), jid 0, uid 106: exited on signal 11 (no core dump - bad address) [...] re1: promiscuous mode enabled [...] 606.302241 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 606.302284 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] 606.302344 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 606.302376 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] 606.302423 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 606.302454 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] pppoe0: permanently promiscuous mode enabled [...] 606.310857 [1167] generic_netmap_attach Emulated adapter for pppoe0 created (prev was NULL) [...] 606.927822 [ 319] generic_netmap_register Emulated adapter for pppoe0 activated [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on re1 [...] re1: promiscuous mode disabled [...] 456.640017 [ 294] generic_netmap_unregister Emulated adapter for pppoe0 deactivated [...] 456.642732 [1072] generic_netmap_dtor Emulated netmap adapter for pppoe0 destroyed [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1d10h45m22s [...] ukbd0: detached [...] ums0: detached [...] uhub1: detached [...] uhub0: detached [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p3 stable/24.7-n267802-bc5627fc5f3 SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (2166.76-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8155217920 (7777 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) [...] ioapic0 <Version 2.0> irqs 0-86 [...] Launching APs: 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: No AES or SHA support. [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0915000-0xd09157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0900000-0xd090ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel BayTrail HDA Controller> mem 0xd0910000-0xd0913fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xd0804000-0xd0804fff,0xd0800000-0xd0803fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] iwn0: <Intel Centrino Advanced-N 6205> mem 0xd0700000-0xd0701fff irq 18 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re1: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xd0604000-0xd0604fff,0xd0600000-0xd0603fff irq 19 at device 0.0 on pci4 [...] re1: Using Memory Mapping! [...] re1: Using 1 MSI-X message [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Using defaults for TSO: 65518/35/2048 [...] re1: Ethernet address: ... [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Sleep Button> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1083333099 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC897 (Analog)> at nid 27 and 24,25 on hdaa0 [...] hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <GOFATOO SSD SN13200> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub0: 7 ports with 7 removable, self powered [...] ugen0.2: <Logitech USB Receiver> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 1> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <vendor 0x1a40 USB 2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus0 [...] uhub1: 4 ports with 4 removable, self powered