[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vbefb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (3410.23-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16577974272 (15809 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7200000-0xf720ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7218000-0xf72183ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7210000-0xf7213fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac1: <NVIDIA (0x0fba) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7100000-0xf7101fff irq 16 at device 0.0 on pci3 [...] xhci1: 64 bytes context size, 32-bit DMA [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf2104000-0xf2104fff,0xf2100000-0xf2103fff irq 17 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: Chip rev. 0x48000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci5 [...] pci6: <ACPI PCI bus> on pcib6 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7217000-0xf72173ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7216000-0xf72167ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1705007057 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa0 [...] pcm3: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] pcm5: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm6: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm7: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen2.1: <(0x1912) XHCI root HUB> at usbus2 [...] uhub3 on usbus2 [...] uhub3: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDH2256G X211200> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Samsung SSD 860 EVO 1TB RVT03B6Q> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: (none) in 'Slot 02', SATA Slot: scbus2 target 0 [...] ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada2: <WDC WD2002FAEX-007BA0 05.01D05> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 1907729MB (3907029168 512 byte sectors) [...] ses0: ada2 in 'Slot 03', SATA Slot: scbus3 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <TSSTcorp CDDVDW SH-S203N SB02> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada0s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0s1 is ntfs/System-reserviert. [...] GEOM_LABEL[1]: MSDOSFS: ada0s2: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0s3: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0s4: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada0s4. [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label System-reserviert(ntfs/System-reserviert) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1s1 is ntfs/Volume. [...] GEOM_LABEL[1]: MSDOSFS: ada2s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2s1 is ntfs/daten. [...] GEOM_LABEL[1]: MSDOSFS: ada2s2: no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Volume(ntfs/Volume) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: ada2s2+00000001: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada2s2+00000001. [...] GEOM_LABEL[1]: MSDOSFS: ada2s2+06188439: no FAT signature found. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label daten(ntfs/daten) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] uhub1: 8 ports with 8 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus3 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x0024> at usbus3 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Transcend StoreJet Transcend (0x2174:0x2000) [...] ugen0.2: <Transcend StoreJet Transcend> at usbus0 [...] umass0 on uhub1 [...] umass0: <Transcend StoreJet Transcend, class 0/0, rev 2.10/80.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <StoreJet Transcend 0> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 228936MB (468862128 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] random: unblocking device. [...] GEOM_LABEL[1]: MSDOSFS: da0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: ISO9660 file system detected on ventoy/IMAGE. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGE is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGE: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: da0s1: no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: da0s2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0s2 is msdosfs/VTOYEFI. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp1 is gptid/HASH_538-C27B-D61E-3338-E43F2639D160. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is gptid/HASH_39A-D6DC-0414-A721-FD70ADA53FA4. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is msdosfs/EFISYS. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] uhub4: 6 ports with 6 removable, self powered [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label VTOYEFI(msdosfs/VTOYEFI) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: Label HASH_538-C27B-D61E-3338-E43F2639D160(gptid/HASH_538-C27B-D61E-3338-E43F2639D160) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] uhub5: 8 ports with 8 removable, self powered [...] GEOM_LABEL[1]: Label HASH_39A-D6DC-0414-A721-FD70ADA53FA4(gptid/HASH_39A-D6DC-0414-A721-FD70ADA53FA4) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] Root mount waiting for: usbus1 usbus3 [...] ugen1.3: <Yubico Yubikey 4 OTP+U2F+CCID> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Yubico Yubikey 4 OTP+U2F+CCID, class 0/0, rev 2.00/4.37, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ugen3.3: <Microsoft Basic Optical Mouse> at usbus3 [...] Root mount waiting for: usbus1 usbus3 [...] ugen3.4: <GeneralPlus USB Audio Device> at usbus3 [...] usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored) [...] ugen3.5: <Wacom Co.,Ltd. Wacom Wireless Receiver> at usbus3 [...] Root mount waiting for: usbus1 usbus3 [...] ugen3.6: <SoloKeys Solo 4.0.0> at usbus3 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] ugen1.4: <Unknown > at usbus1 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] nvidia0: <NVIDIA GeForce GTX 960> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.60.02 Wed Mar 16 11:03:12 UTC 2022 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 03 1c 44 90 00 00 80 00 [...] (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (da0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7215000-0xf72150ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] uhid0 on uhub4 [...] uhid0: <Yubico Yubikey 4 OTP+U2F+CCID, class 0/0, rev 2.00/4.37, addr 3> on usbus1 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXX removed. [...] uhid1 on uhub5 [...] uhid1: <GeneralPlus USB Audio Device, class 0/0, rev 1.10/1.00, addr 4> on usbus3 [...] uhid2 on uhub5 [...] uhid2: <Wacom Co.,Ltd. Wacom Wireless Receiver, class 0/0, rev 2.00/1.11, addr 5> on usbus3 [...] uhid3 on uhub5 [...] uhid3: <Wacom Co.,Ltd. Wacom Wireless Receiver, class 0/0, rev 2.00/1.11, addr 5> on usbus3 [...] uhid4 on uhub5 [...] uhid4: <Wacom Co.,Ltd. Wacom Wireless Receiver, class 0/0, rev 2.00/1.11, addr 5> on usbus3 [...] uhid5 on uhub5 [...] uhid5: <Solo 4.0.0> on usbus3 [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada0s4: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada0s4. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label System-reserviert(ntfs/System-reserviert) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXX [...] ums0 on uhub5 [...] ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 3> on usbus3 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] GEOM_LABEL[1]: MSDOSFS: ada2s2: no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada2s2+00000001: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada2s2+00000001. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/System-reserviert removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/Volume removed. [...] GEOM_LABEL[1]: Label ntfs/daten removed. [...] uaudio0 on uhub5 [...] uaudio0: <GeneralPlus USB Audio Device, class 0/0, rev 1.10/1.00, addr 4> on usbus3 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm8: <USB audio> on uaudio0 [...] uaudio0: HID volume keys found. [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 03 02 fe 64 00 00 80 00 [...] (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] (da0:umass-sim0:0:0:0): Retrying command, 3 more tries remain [...] Cuse v0.1.36 @ /dev/cuse [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada2s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2s1 is ntfs/daten. [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1s1 is ntfs/Volume. [...] GEOM_LABEL[1]: MSDOSFS: ada0s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0s1 is ntfs/System-reserviert. [...] GEOM_LABEL[1]: MSDOSFS: ada0s2: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada0s3: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label daten(ntfs/daten) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Volume(ntfs/Volume) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label System-reserviert(ntfs/System-reserviert) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vbefb): resolution 800x600 [...] CPU: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (3410.17-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16577974272 (15809 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7200000-0xf720ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7218000-0xf72183ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Panther Point HDA Controller> mem 0xf7210000-0xf7213fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac1: <NVIDIA (0x0fba) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci2 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7100000-0xf7101fff irq 16 at device 0.0 on pci3 [...] xhci1: 64 bytes context size, 32-bit DMA [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf2104000-0xf2104fff,0xf2100000-0xf2103fff irq 17 at device 0.0 on pci4 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x48000000 [...] re0: MAC rev. 0x00000000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci5 [...] pci6: <ACPI PCI bus> on pcib6 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7217000-0xf72173ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7216000-0xf72167ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1705006663 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 [...] pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 [...] pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa0 [...] pcm3: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0 [...] hdacc1: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa1 [...] pcm5: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] pcm6: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] pcm7: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa1 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen2.1: <(0x1912) XHCI root HUB> at usbus2 [...] uhub1 on usbus3 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub2 on usbus2 [...] uhub2: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub3 on usbus1 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDH2256G X211200> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 244198MB (500118192 512 byte sectors) [...] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada1: <Samsung SSD 860 EVO 1TB RVT03B6Q> ACS-4 ATA SATA 3.x device [...] ada1: Serial Number... [...] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada1: Command Queueing enabled [...] ada1: 953869MB (1953525168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0 [...] ses0: (none) in 'Slot 02', SATA Slot: scbus2 target 0 [...] ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 [...] ada2: <WDC WD2002FAEX-007BA0 05.01D05> ATA8-ACS SATA 3.x device [...] ada2: Serial Number... [...] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada2: Command Queueing enabled [...] ada2: 1907729MB (3907029168 512 byte sectors) [...] ses0: ada2 in 'Slot 03', SATA Slot: scbus3 target 0 [...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [...] cd0: <TSSTcorp CDDVDW SH-S203N SB02> Removable CD-ROM SCSI device [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada0s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0s1 is ntfs/System-reserviert. [...] GEOM_LABEL[1]: MSDOSFS: ada0s2: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0s3: FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: ada0s4: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada0s4. [...] GEOM_LABEL[1]: MSDOSFS: ada1: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label System-reserviert(ntfs/System-reserviert) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada1s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada1s1 is ntfs/Volume. [...] GEOM_LABEL[1]: MSDOSFS: ada2s1: FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2s1 is ntfs/daten. [...] GEOM_LABEL[1]: MSDOSFS: ada2s2: no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label Volume(ntfs/Volume) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: ada2s2+00000001: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada2s2+00000001. [...] GEOM_LABEL[1]: MSDOSFS: ada2s2+06188439: no FAT signature found. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label daten(ntfs/daten) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] uhub0: 8 ports with 8 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus3 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub3 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x0024> at usbus3 [...] uhub5 on uhub1 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Transcend StoreJet Transcend (0x2174:0x2000) [...] ugen0.2: <Transcend StoreJet Transcend> at usbus0 [...] umass0 on uhub0 [...] umass0: <Transcend StoreJet Transcend, class 0/0, rev 2.10/80.00, addr 1> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0100 [...] umass0:5:0: Attached to scbus5 [...] da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 [...] da0: <StoreJet Transcend 0> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 228936MB (468862128 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: MSDOSFS: da0: no FAT volume detected. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXXXXXX [...] GEOM: ventoy/IMAGE: the secondary GPT table is corrupt or invalid. [...] GEOM: ventoy/IMAGE: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: ISO9660 file system detected on ventoy/IMAGE. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGE is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGE: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: da0s1: no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: da0s2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0s2 is msdosfs/VTOYEFI. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp1 is gptid/HASH_538-C27B-D61E-3338-E43F2639D160. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is gptid/HASH_39A-D6DC-0414-A721-FD70ADA53FA4. [...] GEOM_LABEL[1]: MSDOSFS: ventoy/IMAGEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider ventoy/IMAGEp2 is msdosfs/EFISYS. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] uhub4: 6 ports with 6 removable, self powered [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label VTOYEFI(msdosfs/VTOYEFI) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXXXXXX). [...] uhub5: 8 ports with 8 removable, self powered [...] GEOM_LABEL[1]: Label HASH_538-C27B-D61E-3338-E43F2639D160(gptid/HASH_538-C27B-D61E-3338-E43F2639D160) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_39A-D6DC-0414-A721-FD70ADA53FA4(gptid/HASH_39A-D6DC-0414-A721-FD70ADA53FA4) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] Root mount waiting for: usbus1 usbus3 [...] ugen1.3: <Yubico Yubikey 4 OTP+U2F+CCID> at usbus1 [...] ukbd0 on uhub4 [...] ukbd0: <Yubico Yubikey 4 OTP+U2F+CCID, class 0/0, rev 2.00/4.37, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ugen3.3: <Microsoft Basic Optical Mouse> at usbus3 [...] Root mount waiting for: usbus1 usbus3 [...] ugen3.4: <GeneralPlus USB Audio Device> at usbus3 [...] usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored) [...] ugen3.5: <Wacom Co.,Ltd. Wacom Wireless Receiver> at usbus3 [...] Root mount waiting for: usbus1 usbus3 [...] ugen3.6: <SoloKeys Solo 4.0.0> at usbus3 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) [...] Root mount waiting for: usbus1 [...] usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_IOERROR [...] ugen1.4: <Unknown > at usbus1 (disconnected) [...] Root mount waiting for: usbus1 [...] uhub_reattach_port: could not allocate new device [...] random: unblocking device. [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] nvidia0: <NVIDIA GeForce GTX 960> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.60.02 Wed Mar 16 11:03:12 UTC 2022 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] re0: link state changed to UP [...] re0: link state changed to DOWN [...] re0: link state changed to UP [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7215000-0xf72150ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] lo0: link state changed to UP [...] uhid0 on uhub4 [...] uhid0: <Yubico Yubikey 4 OTP+U2F+CCID, class 0/0, rev 2.00/4.37, addr 3> on usbus1 [...] uhid1 on uhub5 [...] uhid1: <GeneralPlus USB Audio Device, class 0/0, rev 1.10/1.00, addr 4> on usbus3 [...] uhid2 on uhub5 [...] uhid2: <Wacom Co.,Ltd. Wacom Wireless Receiver, class 0/0, rev 2.00/1.11, addr 5> on usbus3 [...] uhid3 on uhub5 [...] uhid3: <Wacom Co.,Ltd. Wacom Wireless Receiver, class 0/0, rev 2.00/1.11, addr 5> on usbus3 [...] uhid4 on uhub5 [...] uhid4: <Wacom Co.,Ltd. Wacom Wireless Receiver, class 0/0, rev 2.00/1.11, addr 5> on usbus3 [...] uhid5 on uhub5 [...] uhid5: <Solo 4.0.0> on usbus3 [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: MSDOSFS: ada0s4: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada0s4. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label System-reserviert(ntfs/System-reserviert) already exists (diskid/XXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on diskid/XXXXXXXXXXXXXXXXXXXX [...] ums0 on uhub5 [...] ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 3> on usbus3 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] GEOM_LABEL[1]: MSDOSFS: ada2: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada2 is diskid/XXXXXXXXXXXXXXXXXXXXX [...] uaudio0 on uhub5 [...] uaudio0: <GeneralPlus USB Audio Device, class 0/0, rev 1.10/1.00, addr 4> on usbus3 [...] uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm8: <USB audio> on uaudio0 [...] uaudio0: HID volume keys found. [...] GEOM_LABEL[1]: MSDOSFS: ada2s2: no FAT volume detected. [...] GEOM_LABEL[1]: MSDOSFS: ada2s2+00000001: no FAT signature found. [...] GEOM_LABEL[1]: ext2fs file system detected on ada2s2+00000001. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/System-reserviert removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/Volume removed. [...] GEOM_LABEL[1]: Label diskid/XXXXXXXXXXXXXXXXXXXX removed. [...] GEOM_LABEL[1]: Label ntfs/daten removed. [...] ichwd0: <Intel Panther Point watchdog timer> on isa0 [...] Cuse v0.1.36 @ /dev/cuse