[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-CURRENT #7 r362734: Mon Jun 29 02:34:57 CEST 2020 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-rc2-0-g77d76b71d7d) [...] WARNING: WITNESS option enabled, expect reduced performance. [...] VT(efifb): resolution 2560x1440 [...] CPU: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (1992.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806ea Family=0x6 Model=0x8e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16464355328 (15701 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-N24 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 3 1 2 [...] Timecounter "TSC" frequency 1992084903 Hz quality 1000 [...] random: entropy device external interface [...] WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. [...] kbd1 at kbdmux0 [...] 000.000044 [4342] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <LENOVO TP-N24> [...] acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xf2000000-0xf2ffffff,0xc0000000-0xdfffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xf4220000-0xf422ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf3000000-0xf3ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 29.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] nvme0: <Generic NVMe Device> mem 0xf4000000-0xf4003fff at device 0.0 on pci4 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Kaby Lake-LP HDA Controller> mem 0xf4248000-0xf424bfff,0xf4230000-0xf423ffff at device 31.3 on pci0 [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xf4200000-0xf421ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 13.0. [...] psm0: model Synaptics Touchpad, device ID 0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <SAMSUNG MZVLB512HAJQ-000L7> NVMe namespace [...] nvd0: 488386MB (1000215216 512 byte sectors) [...] hdacc0: <Realtek ALC257 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0 [...] pcm1: <Realtek ALC257 (Right Analog Mic)> at nid 25 on hdaa0 [...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/13.0-CURRENT-20200628.180251 []... [...] WARNING: WITNESS option enabled, expect reduced performance. [...] GEOM_ELI: Device nvd0p4.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: accelerated software [...] uhub0: 18 ports with 18 removable, self powered [...] [drm:drm_core_init] Initialized [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm:intel_detect_pch] Found SunrisePoint LP PCH [...] [drm:get_allowed_dc_mask] Allowed DC state mask 03 [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] [drm:__intel_uncore_early_sanitize] unclaimed mmio detected on uncore init, clearing [...] [drm:intel_sanitize_options] ppgtt mode: 3 [...] [drm:intel_uc_sanitize_options] enable_guc=0 (submission:no huc:no) [...] [drm:i915_ggtt_probe_hw] GGTT size = 4096M [...] [drm:i915_ggtt_probe_hw] GMADR size = 512M [...] [drm:i915_ggtt_probe_hw] DSM size = 32M [...] Failed to add WC MTRR for [0xc0000000-0xdfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xad800000, size 0x2000000 [...] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K [...] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab558018 [...] [drm:intel_opregion_setup] Public ACPI methods supported [...] [drm:intel_opregion_setup] SWSCI supported [...] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [...] [drm:intel_opregion_setup] ASLE supported [...] [drm:intel_opregion_setup] ASLE extension supported [...] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [...] [drm:intel_bios_init] VBT signature "$VBT SKYLAKE ", BDB version 212 [...] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [...] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [...] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0) [...] [drm:parse_lfp_panel_data] Panel type: 2 (VBT) [...] [drm:parse_lfp_panel_data] DRRS supported mode is static [...] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [...] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [...] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 990 Hz, active high, min brightness 4, level 95, controller 0 [...] [drm:parse_driver_features] DRRS State Enabled:1 [...] [drm:parse_sdvo_device_mapping] Skipping SDVO device mapping [...] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [...] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [...] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [...] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8 [...] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [...] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6 [...] [drm:parse_ddi_port] VBT (e)DP boost level for port C: 1 [...] [drm:parse_ddi_port] VBT HDMI boost level for port C: 7 [...] [drm:intel_update_rawclk] rawclk rate: 24000 kHz [...] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [...] [drm:intel_power_well_enable] enabling power well 1 [...] [drm:intel_power_well_enable] enabling MISC IO power well [...] [drm:intel_dump_cdclk_state] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, voltage level 0 [...] [drm:intel_update_max_cdclk] Max CD clock rate: 675000 kHz [...] [drm:intel_update_max_cdclk] Max dotclock rate: 675000 kHz [...] [drm:intel_power_well_enable] enabling always-on [...] [drm:intel_power_well_enable] enabling DC off [...] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [...] [drm:intel_power_well_enable] enabling power well 2 [...] [drm:intel_power_well_enable] enabling DDI A/E IO power well [...] [drm:intel_power_well_enable] enabling DDI B IO power well [...] [drm:intel_power_well_enable] enabling DDI C IO power well [...] [drm:intel_power_well_enable] enabling DDI D IO power well [...] [drm:intel_csr_ucode_init] Loading i915/kbl_dmc_ver1_04.bin [...] [drm:drm_irq_install] irq=136 [...] [drm:intel_fbc_init] Sanitized enable_fbc value: 1 [...] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 2 (2.0 usec) [...] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 19 (19.0 usec) [...] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 28 (28.0 usec) [...] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 32 (32.0 usec) [...] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 63 (63.0 usec) [...] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 77 (77.0 usec) [...] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 83 (83.0 usec) [...] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 99 (99.0 usec) [...] [drm:intel_modeset_init] 3 display pipes available. [...] [drm:intel_dump_cdclk_state] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, voltage level 0 [...] [drm:intel_dp_init_connector] Adding eDP connector on port A [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm:intel_aux_port] using AUX A for port A (VBT) [...] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [...] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [...] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [...] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [...] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [...] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [...] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [...] [drm:intel_dp_read_dpcd] DPCD: fffff8000c601133h [...] [drm:drm_dp_read_desc] DP sink: OUI fffff8000c6011bchD dev-ID 0xfffff8000c6011bfE HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [...] [drm:intel_edp_init_dpcd] Detected EDP PSR Panel. [...] [drm:intel_edp_init_dpcd] eDP DPCD: fffff8000c601154h [...] [drm:drm_edid_to_eld] ELD: no CEA Extension found [...] [drm:drm_add_display_info] non_desktop set to 0 [...] [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [...] [drm:drm_add_display_info] non_desktop set to 0 [...] [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [...] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [...] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 564/1515 [...] [drm:intel_dp_init_connector] Adding DP connector on port B [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm:intel_aux_port] using AUX B for port B (VBT) [...] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm:intel_hdmi_ddc_pin] Using DDC pin 0x5 for port B (VBT) [...] [drm:intel_dp_init_connector] Adding DP connector on port C [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm:intel_aux_port] using AUX C for port C (VBT) [...] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm:intel_hdmi_ddc_pin] Using DDC pin 0x4 for port C (VBT) [...] [drm:intel_set_plane_visible] pipe A active planes 0x1 [...] [drm:intel_set_plane_visible] pipe A active planes 0x1 [...] [drm:intel_set_plane_visible] pipe A active planes 0x1 [...] [drm:intel_modeset_readout_hw_state] [CRTC:37:pipe A] hw state readout: enabled [...] [drm:intel_set_plane_visible] pipe B active planes 0x0 [...] [drm:intel_set_plane_visible] pipe B active planes 0x0 [...] [drm:intel_set_plane_visible] pipe B active planes 0x0 [...] [drm:intel_modeset_readout_hw_state] [CRTC:47:pipe B] hw state readout: disabled [...] [drm:intel_set_plane_visible] pipe C active planes 0x0 [...] [drm:intel_set_plane_visible] pipe C active planes 0x0 [...] [drm:intel_set_plane_visible] pipe C active planes 0x0 [...] [drm:intel_modeset_readout_hw_state] [CRTC:57:pipe C] hw state readout: disabled [...] [drm:intel_modeset_readout_hw_state] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1 [...] [drm:intel_modeset_readout_hw_state] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [...] [drm:intel_modeset_readout_hw_state] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [...] [drm:intel_modeset_readout_hw_state] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [...] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [...] [drm:intel_modeset_readout_hw_state] [ENCODER:58:DDI A] hw state readout: enabled, pipe A [...] [drm:intel_modeset_readout_hw_state] [ENCODER:65:DDI B] hw state readout: disabled, pipe A [...] [drm:intel_modeset_readout_hw_state] [ENCODER:67:DP-MST A] hw state readout: disabled, pipe A [...] [drm:intel_modeset_readout_hw_state] [ENCODER:68:DP-MST B] hw state readout: disabled, pipe B [...] [drm:intel_modeset_readout_hw_state] [ENCODER:69:DP-MST C] hw state readout: disabled, pipe C [...] [drm:intel_modeset_readout_hw_state] [ENCODER:73:DDI C] hw state readout: disabled, pipe A [...] [drm:intel_modeset_readout_hw_state] [ENCODER:75:DP-MST A] hw state readout: disabled, pipe A [...] [drm:intel_modeset_readout_hw_state] [ENCODER:76:DP-MST B] hw state readout: disabled, pipe B [...] [drm:intel_modeset_readout_hw_state] [ENCODER:77:DP-MST C] hw state readout: disabled, pipe C [...] [drm:intel_modeset_readout_hw_state] [CONNECTOR:59:eDP-1] hw state readout: enabled [...] [drm:intel_modeset_readout_hw_state] [CONNECTOR:66:DP-1] hw state readout: disabled [...] [drm:intel_modeset_readout_hw_state] [CONNECTOR:71:HDMI-A-1] hw state readout: disabled [...] [drm:intel_modeset_readout_hw_state] [CONNECTOR:74:DP-2] hw state readout: disabled [...] [drm:intel_modeset_readout_hw_state] [CONNECTOR:78:HDMI-A-2] hw state readout: disabled [...] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:2560x1440] for CRTC state 0xfffff8000386f800 [...] [drm:drm_calc_timestamping_constants] crtc 37: hwmode: htotal 2720, vtotal 1504, vdisplay 1440 [...] [drm:drm_calc_timestamping_constants] crtc 37: clock 245499 kHz framedur 16663530 linedur 11079 [...] [drm:drm_crtc_vblank_on] crtc 0, vblank enabled 0, inmodeset 1 [...] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,783)@ 3.106716 -> 3.098041 [e 0 us, 0 rep] [...] [drm:intel_dump_pipe_config] [CRTC:37:pipe A][setup_hw_state] [...] [drm:intel_dump_pipe_config] output_types: EDP (0x100) [...] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [...] [drm:intel_dump_m_n_config] dp m_n: lanes: 4; gmch_m: 5720564, gmch_n: 8388608, link_m: 476713, link_n: 524288, tu: 64 [...] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [...] [drm:intel_dump_pipe_config] requested mode: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 245499 2560 2608 2640 2720 1440 1443 1448 1504 0x40 0xa [...] [drm:intel_dump_pipe_config] adjusted mode: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 245499 2560 2608 2640 2720 1440 1443 1448 1504 0x40 0xa [...] [drm:intel_dump_crtc_timings] crtc timings: 245499 2560 2608 2640 2720 1440 1443 1448 1504, type: 0x40 flags: 0xa [...] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 2560x1440, pixel rate 245499 [...] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [...] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [...] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [...] [drm:skl_dump_hw_state] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [...] [drm:intel_dump_pipe_config] planes on this crtc [...] [drm:intel_dump_pipe_config] [PLANE:28:plane 1A] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [PLANE:31:plane 2A] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [PLANE:34:cursor A] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [CRTC:47:pipe B][setup_hw_state] [...] [drm:intel_dump_pipe_config] output_types: (0x0) [...] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [...] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [...] [drm:intel_dump_pipe_config] requested mode: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [...] [drm:intel_dump_pipe_config] adjusted mode: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [...] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [...] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [...] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [...] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [...] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [...] [drm:skl_dump_hw_state] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [...] [drm:intel_dump_pipe_config] planes on this crtc [...] [drm:intel_dump_pipe_config] [PLANE:38:plane 1B] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [PLANE:41:plane 2B] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [PLANE:44:cursor B] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [CRTC:57:pipe C][setup_hw_state] [...] [drm:intel_dump_pipe_config] output_types: (0x0) [...] [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [...] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [...] [drm:intel_dump_pipe_config] requested mode: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [...] [drm:intel_dump_pipe_config] adjusted mode: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [...] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [...] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [...] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: -1 [...] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [...] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [...] [drm:skl_dump_hw_state] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [...] [drm:intel_dump_pipe_config] planes on this crtc [...] [drm:intel_dump_pipe_config] [PLANE:48:plane 1C] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [PLANE:51:plane 2C] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [PLANE:54:cursor C] disabled, scaler_id = -1 [...] [drm:drm_mode_object_get] OBJ ID: 59 (2) [...] [drm:skylake_get_initial_plane_config] pipe A/plane 1A with fb: size=2560x1440@32, offset=0, pitch 10240, size 0xe10000 [...] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0xfffffe00aee7b2b0a, gtt_offset=0xfffffe00aee7b2b8a, size=0xfffffe00aee7b2c0a [...] [drm:i915_gem_object_create_stolen_for_preallocated] failed to allocate stolen space [...] [drm:intel_set_plane_visible] pipe A active planes 0x0 [...] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 100000000] [...] [drm:i915_gem_contexts_init] logical context support initialized [...] [drm:intel_engine_create_scratch] rcs0 pipe control offset: 0xfffff000 [...] [drm:init_status_page] rcs0 hws offset: 0xfffcf000 [...] [drm:init_status_page] bcs0 hws offset: 0xfffc8000 [...] [drm:init_status_page] vcs0 hws offset: 0xfffc1000 [...] [drm:init_status_page] vecs0 hws offset: 0xfffba000 [...] [drm:gen8_init_common_ring] Execlists enabled for rcs0 [...] [drm:init_workarounds_ring] rcs0: Number of context specific w/a: 15 [...] [drm:gen8_init_common_ring] Execlists enabled for bcs0 [...] [drm:gen8_init_common_ring] Execlists enabled for vcs0 [...] [drm:gen8_init_common_ring] Execlists enabled for vecs0 [...] [drm:intel_fbdev_init_bios] pipe A not active or no fb, skipping [...] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [...] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [...] [drm:intel_fbdev_init_bios] no active fbs found, not using BIOS config [...] [drm:drm_mode_object_get] OBJ ID: 59 (3) [...] [drm:drm_mode_object_get] OBJ ID: 66 (2) [...] [drm:drm_mode_object_get] OBJ ID: 71 (2) [...] [drm:drm_mode_object_get] OBJ ID: 74 (2) [...] [drm:drm_mode_object_get] OBJ ID: 78 (2) [...] [drm:drm_minor_register] [...] [drm:drm_minor_register] [...] [drm:drm_minor_register] new minor registered 128 [...] [drm:drm_minor_register] [...] [drm:drm_minor_register] new minor registered 0 [...] [drm:drm_sysfs_connector_add] adding "eDP-1" to sysfs [...] [drm:drm_sysfs_hotplug_event] generating hotplug event [...] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [...] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1 [...] [drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-A] registered as minor 0 [...] [drm:drm_sysfs_connector_add] adding "DP-1" to sysfs [...] [drm:drm_sysfs_hotplug_event] generating hotplug event [...] [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1 [...] [drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-B] registered as minor 1 [...] [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs [...] [drm:drm_sysfs_hotplug_event] generating hotplug event [...] [drm:drm_sysfs_connector_add] adding "DP-2" to sysfs [...] [drm:drm_sysfs_hotplug_event] generating hotplug event [...] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-2 [...] [drm:drm_dp_aux_register_devnode] drm_dp_aux_dev: aux [DPDDC-C] registered as minor 2 [...] [drm:drm_sysfs_connector_add] adding "HDMI-A-2" to sysfs [...] [drm:drm_sysfs_hotplug_event] generating hotplug event [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] [drm:intel_didl_outputs] 5 outputs detected [...] [drm:drm_setup_crtcs] [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:eDP-1] [...] [drm:intel_dp_detect] [CONNECTOR:59:eDP-1] [...] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [...] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [...] [drm:intel_dp_print_rates] common rates: 162000, 270000 [...] [drm:drm_dp_read_desc] DP sink: OUI fffff8000c6011bchD dev-ID 0xfffff8000c6011bfE HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:eDP-1] status updated from unknown to connected [...] [drm:drm_add_display_info] [drm:drm_sysfs_hotplug_event] non_desktop set to 0 [...] generating hotplug event [...] [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [...] [drm:drm_mode_object_put] OBJ ID: 61 (1) [...] [drm:drm_edid_to_eld] ELD: no CEA Extension found [...] [drm:drm_add_display_info] non_desktop set to 0 [...] [drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 8 bpc. [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:eDP-1] probed modes : [...] [drm:drm_mode_debug_printmodeline] Modeline 60:"2560x1440" 60 245500 2560 2608 2640 2720 1440 1443 1448 1504 0x48 0xa [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:DP-1] [...] [drm:intel_dp_detect] [CONNECTOR:66:DP-1] [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:DP-1] status updated from unknown to disconnected [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:66:DP-1] disconnected [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:HDMI-A-1] [...] [drm:intel_hdmi_detect] [CONNECTOR:71:HDMI-A-1] [...] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [...] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [...] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [...] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [...] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [...] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [...] acpi_ibm0: <ThinkPad ACPI Extras> on acpi0 [...] acpi_ibm0: Firmware version is 0x200 [...] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [...] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: 0xfffffe00aeec26c0E (err -6) [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:HDMI-A-1] status updated from unknown to disconnected [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:HDMI-A-1] disconnected [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:DP-2] [...] [drm:intel_dp_detect] [CONNECTOR:74:DP-2] [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:DP-2] status updated from unknown to disconnected [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:74:DP-2] disconnected [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-2] [...] [drm:intel_hdmi_detect] [CONNECTOR:78:HDMI-A-2] [...] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [...] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [...] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [...] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [...] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging [...] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1 [...] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [...] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0 [...] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [...] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [...] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [...] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: 0xfffffe00aeec26c0E (err -6) [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-2] status updated from unknown to disconnected [...] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-2] disconnected [...] [drm:drm_enable_connectors] connector 59 enabled? yes [...] [drm:drm_enable_connectors] connector 66 enabled? no [...] [drm:drm_enable_connectors] connector 71 enabled? no [...] [drm:drm_enable_connectors] connector 74 enabled? no [...] [drm:drm_enable_connectors] connector 78 enabled? no [...] [drm:intel_fb_initial_config] Not using firmware configuration [...] [drm:drm_target_preferred] looking for cmdline mode on connector 59 [...] [drm:drm_target_preferred] looking for preferred mode on connector 59 0 [...] [drm:drm_target_preferred] found mode 2560x1440 [...] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [...] [drm:drm_setup_crtcs] desired mode 2560x1440 set on crtc 37 (0,0) [...] [drm:drm_mode_object_get] OBJ ID: 59 (3) [...] [drm:intelfb_create] no BIOS fb, allocating a new one [...] [drm:intelfb_create] allocated 2560x1440 fb: 0x00040000 [...] WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0. [...] VT: Replacing driver "efifb" with new "fb". [...] uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held: [...] exclusive sleep mutex vtdev (vtdev) r = 0 (0xffffffff818e6820) locked @ /usr/src/sys/dev/vt/vt_core.c:2818 [...] stack backtrace: [...] #0 0xffffffff80c33031 at witness_debugger+0x71 [...] #1 0xffffffff80c33fcd at witness_warn+0x40d [...] #2 0xffffffff80efcfc6 at uma_zalloc_arg+0x46 [...] #3 0xffffffff80b748da at getenv_string_buffer+0x3a [...] #4 0xffffffff80b75007 at getenv_quad+0x17 [...] #5 0xffffffff80b74fd2 at getenv_int+0x12 [...] #6 0xffffffff80a2afb1 at vt_fb_init+0xb1 [...] #7 0xffffffff80a322e8 at vt_replace_backend+0x118 [...] #8 0xffffffff80a2b103 at vt_fb_attach+0x13 [...] #9 0xffffffff836bf002 at linux_register_framebuffer+0x602 [...] #10 0xffffffff8369aa3b at __drm_fb_helper_initial_config_and_unlock+0x2fb [...] #11 0xffffffff835e3994 at intel_fbdev_initial_config+0x14 [...] #12 0xffffffff836f9407 at async_run_entry_fn+0x27 [...] #13 0xffffffff836f503f at linux_work_fn+0xdf [...] #14 0xffffffff80c259ba at taskqueue_run_locked+0xaa [...] #15 0xffffffff80c26a34 at taskqueuacpi_video0: <ACPI video extension> on vgapci0 [...] e_thread_loop+0x94 [...] #16 0xffffffff80b838e0 at fork_exit+0x80 [...] #17 0xffffffff8104037e at fork_trampoline+0xe [...] [drm:asle_set_backlight] bclp = 0x800000ff [...] [drm:asle_set_backlight] updating opregion backlight 255/255 [...] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1515 [...] [drm:drm_atomic_state_init] Allocated atomic state 0xfffff80003caa400 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane 1A] 0xfffff80004f95500 state to 0xfffff80003caa400 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:31:plane 2A] 0xfffff80004f95400 state to 0xfffff80003caa400 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004f95400 to [NOCRTC] [...] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004f95400 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] 0xfffff80004f95300 state to 0xfffff80003caa400 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004f95300 to [NOCRTC] [...] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80004f95300 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:38:plane 1B] 0xfffff80009191600 state to 0xfffff80003caa400 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:41:plane 2B] 0xfffff80009191500 state to 0xfffff80003caa400 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80009191500 to [NOCRTC] [...] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80009191500 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] 0xfffff80009191400 state to 0xfffff80003caa400 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80009191400 to [NOCRTC] [...] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80009191400 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:48:plane 1C] 0xfffff80009191300 state to 0xfffff80003caa400 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:51:plane 2C] 0xfffff80009191200 state to 0xfffff80003caa400 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80009191200 to [NOCRTC] [...] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80009191200 [...] [drm:drm_atomic_get_plane_state] Added [PLANE:54:cursor C] 0xfffff80009191100 state to 0xfffff80003caa400 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80009191100 to [NOCRTC] [...] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80009191100 [...] [drm:drm_mode_object_get] OBJ ID: 79 (1) [...] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] 0xfffff80003871800 state to 0xfffff80003caa400 [...] [drm:drm_mode_object_put] OBJ ID: 79 (2) [...] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:2560x1440] for CRTC state 0xfffff80003871800 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80004f95500 to [CRTC:37:pipe A] [...] [drm:drm_atomic_set_fb_for_plane] Set [FB:81] for plane state 0xfffff80004f95500 [...] [drm:drm_mode_object_get] OBJ ID: 81 (1) [...] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 0xfffff80003caa400 [...] [drm:drm_mode_object_get] OBJ ID: 59 (5) [...] [drm:drm_mode_object_get] OBJ ID: 59 (6) [...] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:59:eDP-1] 0xfffff80003c51000 state to 0xfffff80003caa400 [...] [drm:drm_mode_object_put] OBJ ID: 59 (6) [...] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80003c51000 to [NOCRTC] [...] [drm:drm_mode_object_get] OBJ ID: 59 (5) [...] [drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80003c51000 to [CRTC:37:pipe A] [...] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] 0xfffff80024556800 state to 0xfffff80003caa400 [...] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff80024556800 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80009191600 to [NOCRTC] [...] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80009191600 [...] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to 0xfffff80003caa400 [...] [drm:drm_atomic_get_crtc_state] Added [CRTC:57:pipe C] 0xfffff80024556000 state to 0xfffff80003caa400 [...] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff80024556000 [...] [drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80009191300 to [NOCRTC] [...] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80009191300 [...] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:57:pipe C] to 0xfffff80003caa400 [...] [drm:drm_atomic_check_only] checking 0xfffff80003caa400 [...] [drm:update_connector_routing] Updating routing for [CONNECTOR:59:eDP-1] [...] [drm:update_connector_routing] [CONNECTOR:59:eDP-1] keeps [ENCODER:58:DDI A], now on [CRTC:37:pipe A] [...] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to 0xfffff80003caa400 [...] [drm:connected_sink_compute_bpp] [CONNECTOR:59:eDP-1] checking for sink bpp constrains [...] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [...] [drm:drm_mode_debug_printmodeline] Modeline 62:"2560x1440" 60 245500 2560 2608 2640 2720 1440 1443 1448 1504 0x48 0xa [...] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 245500KHz [...] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 4 clock 270000 bpp 24 [...] [drm:intel_dp_compute_config] DP link bw required 736500 available 1080000 [...] [drm:intel_psr_compute_config] PSR disable by flag [...] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [...] [drm:intel_dump_pipe_config] [CRTC:37:pipe A][modeset] [...] [drm:intel_dump_pipe_config] output_types: EDP (0x100) [...] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [...] [drm:intel_dump_m_n_config] dp m_n: lanes: 4; gmch_m: 5720564, gmch_n: 8388608, link_m: 476713, link_n: 524288, tu: 64 [...] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [...] [drm:intel_dump_pipe_config] requested mode: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 245500 2560 2608 2640 2720 1440 1443 1448 1504 0x48 0xa [...] [drm:intel_dump_pipe_config] adjusted mode: [...] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 245500 2560 2608 2640 2720 1440 1443 1448 1504 0x48 0xa [...] [drm:intel_dump_crtc_timings] crtc timings: 245500 2560 2608 2640 2720 1440 1443 1448 1504, type: 0x48 flags: 0xa [...] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 2560x1440, pixel rate 245500 [...] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [...] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [...] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [...] [drm:skl_dump_hw_state] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [...] [drm:intel_dump_pipe_config] planes on this crtc [...] [drm:intel_dump_pipe_config] [PLANE:28:plane 1A] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [PLANE:31:plane 2A] disabled, scaler_id = -1 [...] [drm:intel_dump_pipe_config] [PLANE:34:cursor A] disabled, scaler_id = -1 [...] [drm:intel_modeset_checks] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [...] [drm:intel_modeset_checks] New voltage level calculated to be logical 0, actual 0 [...] [drm:intel_plane_atomic_calc_changes] [CRTC:37:pipe A] has [PLANE:28:plane 1A] with fb 81 [...] [drm:intel_plane_atomic_calc_changes] [PLANE:28:plane 1A] visible 0 -> 1, off 0, on 1, ms 1 [...] [drm:intel_find_shared_dpll] [CRTC:37:pipe A] allocated DPLL 0 [...] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [...] [drm:skl_print_wm_changes] [PLANE:28:plane 1A] ddb (0 - 446) -> (0 - 860) [...] [drm:skl_print_wm_changes] [PLANE:34:cursor A] ddb (0 - 0) -> (860 - 892) [...] [drm:skl_print_wm_changes] [PLANE:38:plane 1B] ddb (446 - 892) -> (0 - 0) [...] [drm:drm_atomic_commit] committing 0xfffff80003caa400 [...] [drm:intel_edp_backlight_off] [...] start FB_INFO: [...] type=11 height=1440 width=2560 depth=32 [...] cmsize=16 size=14745600 [...] pbase=0xc0040000 vbase=0xfffff800c0040000 [...] name=drmn0 flags=0x0 stride=10240 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [...] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling [...] [drm:drm_crtc_vblank_off] crtc 0, vblank enabled 0, inmodeset 0 [...] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,1095)@ 3.443716 -> 3.431584 [e 0 us, 0 rep] [...] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=1, diff=20, hw=2228 hw_last=2208 [...] [drm:intel_disable_pipe] disabling pipe A [...] [drm:edp_panel_off] Turn eDP port A panel power off [...] [drm:wait_panel_off] Wait for panel power off time [...] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000000 [...] pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xf4251000-0xf4251fff at device 20.2 on pci0 [...] ig4iic0: <Intel Sunrise Point-LP I2C Controller-0> mem 0xf4252000-0xf4252fff at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] [drm:wait_panel_status] Wait complete [...] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 37 [...] [drm:intel_disable_shared_dpll] disabling DPLL 0 [...] [drm:drm_calc_timestamping_constants] crtc 37: hwmode: htotal 2720, vtotal 1504, vdisplay 1440 [...] [drm:drm_calc_timestamping_constants] crtc 37: clock 245500 kHz framedur 16663462 linedur 11079 [...] [drm:verify_encoder_state] [ENCODER:58:DDI A] [...] [drm:verify_encoder_state] [ENCODER:65:DDI B] [...] [drm:verify_encoder_state] [ENCODER:67:DP-MST A] [...] [drm:verify_encoder_state] [ENCODER:68:DP-MST B] [...] [drm:verify_encoder_state] [ENCODER:69:DP-MST C] [...] [drm:verify_encoder_state] [ENCODER:73:DDI C] [...] [drm:verify_encoder_state] [ENCODER:75:DP-MST A] [...] [drm:verify_encoder_state] [ENCODER:76:DP-MST B] [...] [drm:verify_encoder_state] [ENCODER:77:DP-MST C] [...] [drm:verify_single_dpll_state] DPLL 0 [...] [drm:verify_single_dpll_state] DPLL 1 [...] [drm:verify_single_dpll_state] DPLL 2 [...] [drm:verify_single_dpll_state] DPLL 3 [...] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 37 [...] [drm:intel_enable_shared_dpll] enabling DPLL 0 [...] [drm:edp_panel_on] Turn eDP port A panel power on [...] [drm:wait_panel_power_cycle] Wait for panel power cycle [...] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [...] [drm:intel_hpd_irq_handler] digital hpd port A - long [...] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [...] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [...] iwm0: <Intel(R) Dual Band Wireless AC 8265> mem 0xf4100000-0xf4101fff at device 0.0 on pci2 [...] drmn0: successfully loaded firmware image with name: i915/kbl_dmc_ver1_04.bin [...] [drm:intel_power_well_disable] disabling DDI D IO power well [...] [drm:intel_power_well_disable] disabling DDI C IO power well [...] [drm:intel_power_well_disable] disabling DDI B IO power well [...] [drm:intel_power_well_disable] disabling DDI A/E IO power well [...] [drm:intel_power_well_disable] disabling power well 2 [...] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [...] iwm0: hw rev 0x230, fw ver 22.361476.0, address XXX [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 [...] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [...] [drm:wait_panel_status] Wait complete [...] [drm:wait_panel_on] Wait for panel power on [...] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000003 [...] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [...] [drm:intel_hpd_irq_handler] digital hpd port A - long [...] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [...] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [...] [drm:wait_panel_status] Wait complete [...] [drm:intel_power_well_enable] enabling DDI A/E IO power well [...] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [...] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [...] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [...] [drm:intel_dp_set_signal_levels] Using vswing level 0 [...] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [...] [drm:_intel_dp_set_link_train] Using DP training pattern TPS1 [...] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [...] [drm:_intel_dp_set_link_train] Using DP training pattern TPS3 [...] [drm:intel_dp_set_signal_levels] Using signal levels 01000000 [...] [drm:intel_dp_set_signal_levels] Using vswing level 0 [...] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [...] [drm:intel_dp_set_signal_levels] Using signal levels 01000000 [...] [drm:intel_dp_set_signal_levels] Using vswing level 0 [...] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [...] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [...] [drm:intel_dp_start_link_train] [CONNECTOR:59:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 4[drm:intel_enable_pipe] enabling pipe A [...] [drm:drm_crtc_vblank_on] crtc 0, vblank enabled 0, inmodeset 1 [...] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-64)@ 4.341752 -> 4.342461 [e 0 us, 0 rep] [...] [drm:intel_edp_backlight_on] [...] [drm:intel_panel_enable_backlight] pipe A [...] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1515 [...] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [...] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [...] [drm:intel_fbc_alloc_cfb] reserved 7372800 bytes of contiguous stolen space for FBC, threshold: 2 [...] [drm:intel_fbc_enable] Enabling FBC on pipe A [...] [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [...] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-49)@ 4.341752 -> 4.342295 [e 0 us, 0 rep] [...] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=22, diff=0, hw=2229 hw_last=2229 [...] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-46)@ 4.341752 -> 4.342262 [e 0 us, 0 rep] [...] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=22, diff=0, hw=2229 hw_last=2229 [...] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-63)@ 4.358723 -> 4.359421 [e 0 us, 0 rep] [...] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=22, diff=1, hw=2230 hw_last=2229 [...] [drm:drm_handle_vblank_events] vblank event on 23, current 23 [...] [drm:intel_connector_verify_state] [CONNECTOR:59:eDP-1] [...] [drm:drm_mode_object_put] OBJ ID: 79 (1) [...] [drm:verify_crtc_state] [CRTC:37:pipe A] [...] [drm:verify_single_dpll_state] DPLL 0 [...] [drm:intel_enable_sagv] Enabling the SAGV [...] [drm:drm_mode_object_get] OBJ ID: 81 (2) [...] [drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff80003caa400 [...] [drm:drm_mode_object_put] OBJ ID: 59 (6) [...] [drm:drm_mode_object_put] OBJ ID: 59 (5) [...] [drm:__drm_atomic_state_free] Freeing atomic state 0xfffff80003caa400 [...] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-63)@ 4.375556 -> 4.376254 [e 0 us, 0 rep] [...] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=23, diff=1, hw=2231 hw_last=2230 [...] [drm:vblank_disable_fn] disabling vblank on crtc 0 [...] [drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-50)@ 4.375556 -> 4.376110 [e 0 us, 0 rep] [...] [drm:drm_update_vblank_count] updating vblank count on crtc 0: current=24, diff=0, hw=2231 hw_last=2231 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:0:0: Attached to scbus0 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held: [...] exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff800249514d0) locked @ /usr/src/sys/cam/scsi/scsi_pass.c:674 [...] stack backtrace: [...] #0 0xffffffff80c33031 at witness_debugger+0x71 [...] #1 0xffffffff80c33fcd at witness_warn+0x40d [...] #2 0xffffffff80efcfc6 at uma_zalloc_arg+0x46 [...] #3 0xffffffff80b748da at getenv_string_buffer+0x3a [...] #4 0xffffffff80b75007 at getenv_quad+0x17 [...] #5 0xffffffff80b74fd2 at getenv_int+0x12 [...] #6 0xffffffff803a7f1a at daregister+0x1ea [...] #7 0xffffffff8037445b at cam_periph_alloc+0x57b [...] #8 0xffffffff803a7872 at daasync+0x2c2 [...] #9 0xffffffff80381aa2 at xpt_async_process_dev+0x152 [...] #10 0xffffffff8037d682 at xpt_async_process+0x312 [...] #11 0xffffffff8037ddf2 at xpt_done_process+0x382 [...] #12 0xffffffff8037fdb5 at xpt_done_td+0xf5 [...] #13 0xffffffff80b838e0 at fork_exit+0x80 [...] #14 0xffffffff8104037e at fork_trampoline+0xe [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 60906MB (124735488 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [...] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [...] [drm:intel_power_well_disable] disabling DC off [...] [drm:skl_enable_dc6] Enabling DC6 [...] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] wlan0: link state changed to UP [...] CPU: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (1992.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x806ea Family=0x6 Model=0x8e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] hdac0: Command 0x2033b000 timeout on address 2 [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [...] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [...] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [...] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [...] [drm:intel_cpu_fifo_underrun_irq_handler] CPU pipe A FIFO underrun [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] hdac0: Command 0x20170503 timeout on address 2 [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 (disconnected) [...] umass0: at uhub0, port 15, addr 4 (disconnected) [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] hdac0: Command 0x20170500 timeout on address 2 [...] hdac0: Command 0x20270500 timeout on address 2 [...] hdac0: Command 0x20370500 timeout on address 2 [...] hdac0: Command 0x2033b080 timeout on address 2 [...] hdac0: Command 0x20370100 timeout on address 2 [...] hdac0: Command 0x20370740 timeout on address 2 [...] hdac0: Command 0x20370883 timeout on address 2 [...] hdac0: Command 0x203f0900 timeout on address 2 [...] hdac0: Command 0x203f0900 timeout on address 2 [...] hdac0: Command 0x203f2e08 timeout on address 2 [...] hdac0: Command 0x2033b000 timeout on address 2 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:0:0: Attached to scbus0 [...] wlan0: link state changed to UP [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held: [...] exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff80220cb64d0) locked @ /usr/src/sys/cam/scsi/scsi_pass.c:674 [...] stack backtrace: [...] #0 0xffffffff80c33031 at witness_debugger+0x71 [...] #1 0xffffffff80c33fcd at witness_warn+0x40d [...] #2 0xffffffff80efcfc6 at uma_zalloc_arg+0x46 [...] #3 0xffffffff80b748da at getenv_string_buffer+0x3a [...] #4 0xffffffff80b75007 at getenv_quad+0x17 [...] #5 0xffffffff80b74fd2 at getenv_int+0x12 [...] #6 0xffffffff803a7f1a at daregister+0x1ea [...] #7 0xffffffff8037445b at cam_periph_alloc+0x57b [...] #8 0xffffffff803a7872 at daasync+0x2c2 [...] #9 0xffffffff80381aa2 at xpt_async_process_dev+0x152 [...] #10 0xffffffff8037d682 at xpt_async_process+0x312 [...] #11 0xffffffff8037ddf2 at xpt_done_process+0x382 [...] #12 0xffffffff8037fdb5 at xpt_done_td+0xf5 [...] #13 0xffffffff80b838e0 at fork_exit+0x80 [...] #14 0xffffffff8104037e at fork_trampoline+0xe [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 60906MB (124735488 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] lock order reversal: [...] 1st 0xfffff8002418a808 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1005 [...] 2nd 0xfffff802d943cdc0 devfs (devfs) @ /usr/src/sys/kern/vfs_mount.c:1016 [...] stack backtrace: [...] #0 0xffffffff80c33031 at witness_debugger+0x71 [...] #1 0xffffffff80b98188 at lockmgr_lock_flags+0x188 [...] #2 0xffffffff80cb3db4 at _vn_lock+0x54 [...] #3 0xffffffff80c95c4f at vfs_domount+0xdaf [...] #4 0xffffffff80c94431 at vfs_donmount+0x871 [...] #5 0xffffffff80c93b89 at sys_nmount+0x69 [...] #6 0xffffffff8106a3f0 at amd64_syscall+0x140 [...] #7 0xffffffff8103fc60 at fast_syscall_common+0x101 [...] hdac0: Command 0x20170503 timeout on address 2 [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 (disconnected) [...] umass0: at uhub0, port 15, addr 4 (disconnected) [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:1 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:1 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:1 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: WRITE sqid:4 cid:0 nsid:1 lba:236565152 len:32 [...] hdac0: Command 0x20170500 timeout on address 2 [...] hdac0: Command 0x20270500 timeout on address 2 [...] hdac0: Command 0x20370500 timeout on address 2 [...] hdac0: Command 0x2033b080 timeout on address 2 [...] hdac0: Command 0x20370100 timeout on address 2 [...] hdac0: Command 0x20370740 timeout on address 2 [...] hdac0: Command 0x20370883 timeout on address 2 [...] hdac0: Command 0x203f0900 timeout on address 2 [...] hdac0: Command 0x203f0900 timeout on address 2 [...] hdac0: Command 0x203f2e08 timeout on address 2 [...] hdac0: Command 0x2033b000 timeout on address 2 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:0:0: Attached to scbus0 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held: [...] exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff800249514d0) locked @ /usr/src/sys/cam/scsi/scsi_pass.c:674 [...] stack backtrace: [...] #0 0xffffffff80c33031 at witness_debugger+0x71 [...] #1 0xffffffff80c33fcd at witness_warn+0x40d [...] #2 0xffffffff80efcfc6 at uma_zalloc_arg+0x46 [...] #3 0xffffffff80b748da at getenv_string_buffer+0x3a [...] #4 0xffffffff80b75007 at getenv_quad+0x17 [...] #5 0xffffffff80b74fd2 at getenv_int+0x12 [...] #6 0xffffffff803a7f1a at daregister+0x1ea [...] #7 0xffffffff8037445b at cam_periph_alloc+0x57b [...] #8 0xffffffff803a7872 at daasync+0x2c2 [...] #9 0xffffffff80381aa2 at xpt_async_process_dev+0x152 [...] #10 0xffffffff8037d682 at xpt_async_process+0x312 [...] #11 0xffffffff8037ddf2 at xpt_done_process+0x382 [...] #12 0xffffffff8037fdb5 at xpt_done_td+0xf5 [...] #13 0xffffffff80b838e0 at fork_exit+0x80 [...] #14 0xffffffff8104037e at fork_trampoline+0xe [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 60906MB (124735488 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] tun0: link state changed to UP [...] nd6_dad_timer: cancel DAD on tun0 because of ND6_IFF_IFDISABLED. [...] hdac0: Command 0x20170503 timeout on address 2 [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 (disconnected) [...] umass0: at uhub0, port 15, addr 4 (disconnected) [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] hdac0: Command 0x20170500 timeout on address 2 [...] hdac0: Command 0x20270500 timeout on address 2 [...] hdac0: Command 0x20370500 timeout on address 2 [...] hdac0: Command 0x2033b080 timeout on address 2 [...] hdac0: Command 0x20370100 timeout on address 2 [...] hdac0: Command 0x20370740 timeout on address 2 [...] hdac0: Command 0x20370883 timeout on address 2 [...] hdac0: Command 0x203f0900 timeout on address 2 [...] hdac0: Command 0x203f0900 timeout on address 2 [...] hdac0: Command 0x203f2e08 timeout on address 2 [...] hdac0: Command 0x2033b000 timeout on address 2 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:0:0: Attached to scbus0 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held: [...] exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff80220b6ecd0) locked @ /usr/src/sys/cam/scsi/scsi_pass.c:674 [...] stack backtrace: [...] #0 0xffffffff80c33031 at witness_debugger+0x71 [...] #1 0xffffffff80c33fcd at witness_warn+0x40d [...] #2 0xffffffff80efcfc6 at uma_zalloc_arg+0x46 [...] #3 0xffffffff80b748da at getenv_string_buffer+0x3a [...] #4 0xffffffff80b75007 at getenv_quad+0x17 [...] #5 0xffffffff80b74fd2 at getenv_int+0x12 [...] #6 0xffffffff803a7f1a at daregister+0x1ea [...] #7 0xffffffff8037445b at cam_periph_alloc+0x57b [...] #8 0xffffffff803a7872 at daasync+0x2c2 [...] #9 0xffffffff80381aa2 at xpt_async_process_dev+0x152 [...] #10 0xffffffff8037d682 at xpt_async_process+0x312 [...] #11 0xffffffff8037ddf2 at xpt_done_process+0x382 [...] #12 0xffffffff8037fdb5 at xpt_done_td+0xf5 [...] #13 0xffffffff80b838e0 at fork_exit+0x80 [...] #14 0xffffffff8104037e at fork_trampoline+0xe [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 60906MB (124735488 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] in_scrubprefix: err=65, prefix delete failed [...] tun0: link state changed to DOWN [...] tun0: link state changed to UP [...] nd6_dad_timer: cancel DAD on tun0 because of ND6_IFF_IFDISABLED. [...] Limiting closed port RST response from 247 to 200 packets/sec [...] Limiting closed port RST response from 215 to 200 packets/sec [...] hdac0: Command 0x20170503 timeout on address 2 [...] wlan0: link state changed to DOWN [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 (disconnected) [...] umass0: at uhub0, port 15, addr 4 (disconnected) [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub0: detached [...] vgapci0: child drmn0 requested pci_set_powerstate [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] nvme0: resubmitting queued i/o [...] nvme0: DATASET MANAGEMENT sqid:3 cid:0 nsid:1 [...] hdac0: Command 0x20170500 timeout on address 2 [...] hdac0: Command 0x20270500 timeout on address 2 [...] hdac0: Command 0x20370500 timeout on address 2 [...] hdac0: Command 0x2033b080 timeout on address 2 [...] hdac0: Command 0x20370100 timeout on address 2 [...] hdac0: Command 0x20370740 timeout on address 2 [...] hdac0: Command 0x20370883 timeout on address 2 [...] hdac0: Command 0x203f0900 timeout on address 2 [...] hdac0: Command 0x203f0900 timeout on address 2 [...] hdac0: Command 0x203f2e08 timeout on address 2 [...] hdac0: Command 0x2033b000 timeout on address 2 [...] uhub0 on usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <Bison Integrated IR Camera> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] ugen0.5: <Generic USB3.0-CRW> at usbus0 [...] umass0 on uhub0 [...] umass0: <Bulk-In, Bulk-Out, Interface> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:0:0: Attached to scbus0 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) [...] (probe0:umass-sim0:0:0:0): Error 22, Unretryable error [...] wlan0: link state changed to UP [...] uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held: [...] exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff8019b75fcd0) locked @ /usr/src/sys/cam/scsi/scsi_pass.c:674 [...] stack backtrace: [...] #0 0xffffffff80c33031 at witness_debugger+0x71 [...] #1 0xffffffff80c33fcd at witness_warn+0x40d [...] #2 0xffffffff80efcfc6 at uma_zalloc_arg+0x46 [...] #3 0xffffffff80b748da at getenv_string_buffer+0x3a [...] #4 0xffffffff80b75007 at getenv_quad+0x17 [...] #5 0xffffffff80b74fd2 at getenv_int+0x12 [...] #6 0xffffffff803a7f1a at daregister+0x1ea [...] #7 0xffffffff8037445b at cam_periph_alloc+0x57b [...] #8 0xffffffff803a7872 at daasync+0x2c2 [...] #9 0xffffffff80381aa2 at xpt_async_process_dev+0x152 [...] #10 0xffffffff8037d682 at xpt_async_process+0x312 [...] #11 0xffffffff8037ddf2 at xpt_done_process+0x382 [...] #12 0xffffffff8037fdb5 at xpt_done_td+0xf5 [...] #13 0xffffffff80b838e0 at fork_exit+0x80 [...] #14 0xffffffff8104037e at fork_trampoline+0xe [...] da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 [...] da0: <Generic- SD/MMC 1.00> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: 60906MB (124735488 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] in_scrubprefix: err=65, prefix delete failed [...] tun0: link state changed to DOWN [...] tun0: link state changed to UP [...] nd6_dad_timer: cancel DAD on tun0 because of ND6_IFF_IFDISABLED. [...] pid 22135 (conftest), jid 8, uid 65534: exited on signal 11 (core dumped)