[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.11-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 12901679104 (12304 MB) [...] avail memory = 12375212032 (11801 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: < > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 23 8 12 13 4 10 14 2 1 9 11 22 15 19 5 20 18 17 16 6 21 7 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <SUPERM SMCI--MB> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 33 at device 2.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.2 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 41 at device 3.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x8000-0x80ff mem 0x380fffc7c000-0x380fffc7ffff,0x380fff800000-0x380fffbfffff irq 16 at device 0.0 numa-domain 0 on pci4 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdfa02000-0xdfa023ff irq 16 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] igb0: <Intel(R) I350 (Copper)> port 0x7020-0x703f mem 0xdf920000-0xdf93ffff,0xdf9c4000-0xdf9c7fff irq 16 at device 0.0 numa-domain 0 on pci5 [...] igb0: EEPROM V1.52-0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x7000-0x701f mem 0xdf900000-0xdf91ffff,0xdf9c0000-0xdf9c3fff irq 17 at device 0.1 numa-domain 0 on pci5 [...] igb1: EEPROM V1.52-0 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdfa01000-0xdfa013ff irq 23 at device 29.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 22 at device 1.0 numa-domain 0 on pci6 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xdfa00000-0xdfa007ff irq 18 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pci7: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib8: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci8: <ACPI PCI bus> numa-domain 1 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 57 at device 2.0 numa-domain 1 on pci8 [...] pci9: <ACPI PCI bus> numa-domain 1 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 65 at device 3.0 numa-domain 1 on pci8 [...] pci10: <ACPI PCI bus> numa-domain 1 on pcib10 [...] pcib11: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci11: <ACPI PCI bus> numa-domain 1 on pcib11 [...] pci11: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci11: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci11: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounter "TSC" frequency 2099999752 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <CT120BX500SSD1 M6CR013> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 [...] ukbd0 numa-domain 0 on uhub3 [...] ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.3: <Chicony HP USB Smartcard CCID Keyboard> at usbus1 [...] ukbd1 numa-domain 0 on uhub2 [...] ukbd1: <HP Keyboard Smartcard Reader> on usbus1 [...] kbd3 at ukbd1 [...] igb0: link state changed to UP [...] ioat0: <IVB IOAT Ch0> mem 0x380ffff1c000-0x380ffff1ffff irq 31 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat1: <IVB IOAT Ch1> mem 0x380ffff18000-0x380ffff1bfff irq 39 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat2: <IVB IOAT Ch2> mem 0x380ffff14000-0x380ffff17fff irq 31 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat3: <IVB IOAT Ch3> mem 0x380ffff10000-0x380ffff13fff irq 39 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat4: <IVB IOAT Ch4> mem 0x380ffff0c000-0x380ffff0ffff irq 31 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat5: <IVB IOAT Ch5> mem 0x380ffff08000-0x380ffff0bfff irq 39 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat6: <IVB IOAT Ch6> mem 0x380ffff04000-0x380ffff07fff irq 31 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat7: <IVB IOAT Ch7> mem 0x380ffff00000-0x380ffff03fff irq 39 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat8: <IVB IOAT Ch0> mem 0x381ffff1c000-0x381ffff1ffff irq 55 at device 4.0 numa-domain 1 on pci8 [...] ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat9: <IVB IOAT Ch1> mem 0x381ffff18000-0x381ffff1bfff irq 63 at device 4.1 numa-domain 1 on pci8 [...] ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat10: <IVB IOAT Ch2> mem 0x381ffff14000-0x381ffff17fff irq 55 at device 4.2 numa-domain 1 on pci8 [...] ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat11: <IVB IOAT Ch3> mem 0x381ffff10000-0x381ffff13fff irq 63 at device 4.3 numa-domain 1 on pci8 [...] ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat12: <IVB IOAT Ch4> mem 0x381ffff0c000-0x381ffff0ffff irq 55 at device 4.4 numa-domain 1 on pci8 [...] ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat13: <IVB IOAT Ch5> mem 0x381ffff08000-0x381ffff0bfff irq 63 at device 4.5 numa-domain 1 on pci8 [...] ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat14: <IVB IOAT Ch6> mem 0x381ffff04000-0x381ffff07fff irq 55 at device 4.6 numa-domain 1 on pci8 [...] ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat15: <IVB IOAT Ch7> mem 0x381ffff00000-0x381ffff03fff irq 63 at device 4.7 numa-domain 1 on pci8 [...] ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ichsmb0: <Intel Patsburg SMBus controller> port 0x1180-0x119f mem 0x380ffff20000-0x380ffff200ff irq 18 at device 31.3 numa-domain 0 on pci0 [...] smbus0: <System Management Bus> numa-domain 0 on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] ums0 numa-domain 0 on uhub3 [...] ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] uhid0 numa-domain 0 on uhub2 [...] uhid0: <HP Smartcard Keyboard Hotkey> on usbus1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p5 stable/23.1-n250372-c4ad069e50a SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 12901679104 (12304 MB) [...] avail memory = 12375212032 (11801 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: < > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 23 8 1 18 4 7 16 2 12 5 9 3 19 10 6 11 15 17 14 13 21 20 22 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <SUPERM SMCI--MB> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 33 at device 2.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.2 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 41 at device 3.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x8000-0x80ff mem 0x380fffc7c000-0x380fffc7ffff,0x380fff800000-0x380fffbfffff irq 16 at device 0.0 numa-domain 0 on pci4 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdfa02000-0xdfa023ff irq 16 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] igb0: <Intel(R) I350 (Copper)> port 0x7020-0x703f mem 0xdf920000-0xdf93ffff,0xdf9c4000-0xdf9c7fff irq 16 at device 0.0 numa-domain 0 on pci5 [...] igb0: EEPROM V1.52-0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x7000-0x701f mem 0xdf900000-0xdf91ffff,0xdf9c0000-0xdf9c3fff irq 17 at device 0.1 numa-domain 0 on pci5 [...] igb1: EEPROM V1.52-0 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdfa01000-0xdfa013ff irq 23 at device 29.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 22 at device 1.0 numa-domain 0 on pci6 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xdfa00000-0xdfa007ff irq 18 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pci7: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib8: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci8: <ACPI PCI bus> numa-domain 1 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 57 at device 2.0 numa-domain 1 on pci8 [...] pci9: <ACPI PCI bus> numa-domain 1 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 65 at device 3.0 numa-domain 1 on pci8 [...] pci10: <ACPI PCI bus> numa-domain 1 on pcib10 [...] pcib11: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci11: <ACPI PCI bus> numa-domain 1 on pcib11 [...] pci11: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci11: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci11: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounter "TSC" frequency 2099999949 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 numa-domain 0 on usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <CT120BX500SSD1 M6CR013> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 numa-domain 0 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 8 ports with 8 removable, self powered [...] ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 [...] ukbd0 numa-domain 0 on uhub3 [...] ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.3: <Chicony HP USB Smartcard CCID Keyboard> at usbus1 [...] ukbd1 numa-domain 0 on uhub2 [...] ukbd1: <HP Keyboard Smartcard Reader> on usbus1 [...] kbd3 at ukbd1 [...] igb0: link state changed to UP [...] ioat0: <IVB IOAT Ch0> mem 0x380ffff1c000-0x380ffff1ffff irq 31 at device 4.0 numa-domain 0 on pci0 [...] ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat1: <IVB IOAT Ch1> mem 0x380ffff18000-0x380ffff1bfff irq 39 at device 4.1 numa-domain 0 on pci0 [...] ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat2: <IVB IOAT Ch2> mem 0x380ffff14000-0x380ffff17fff irq 31 at device 4.2 numa-domain 0 on pci0 [...] ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat3: <IVB IOAT Ch3> mem 0x380ffff10000-0x380ffff13fff irq 39 at device 4.3 numa-domain 0 on pci0 [...] ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat4: <IVB IOAT Ch4> mem 0x380ffff0c000-0x380ffff0ffff irq 31 at device 4.4 numa-domain 0 on pci0 [...] ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat5: <IVB IOAT Ch5> mem 0x380ffff08000-0x380ffff0bfff irq 39 at device 4.5 numa-domain 0 on pci0 [...] ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat6: <IVB IOAT Ch6> mem 0x380ffff04000-0x380ffff07fff irq 31 at device 4.6 numa-domain 0 on pci0 [...] ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat7: <IVB IOAT Ch7> mem 0x380ffff00000-0x380ffff03fff irq 39 at device 4.7 numa-domain 0 on pci0 [...] ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat8: <IVB IOAT Ch0> mem 0x381ffff1c000-0x381ffff1ffff irq 55 at device 4.0 numa-domain 1 on pci8 [...] ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat9: <IVB IOAT Ch1> mem 0x381ffff18000-0x381ffff1bfff irq 63 at device 4.1 numa-domain 1 on pci8 [...] ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat10: <IVB IOAT Ch2> mem 0x381ffff14000-0x381ffff17fff irq 55 at device 4.2 numa-domain 1 on pci8 [...] ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat11: <IVB IOAT Ch3> mem 0x381ffff10000-0x381ffff13fff irq 63 at device 4.3 numa-domain 1 on pci8 [...] ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat12: <IVB IOAT Ch4> mem 0x381ffff0c000-0x381ffff0ffff irq 55 at device 4.4 numa-domain 1 on pci8 [...] ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat13: <IVB IOAT Ch5> mem 0x381ffff08000-0x381ffff0bfff irq 63 at device 4.5 numa-domain 1 on pci8 [...] ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat14: <IVB IOAT Ch6> mem 0x381ffff04000-0x381ffff07fff irq 55 at device 4.6 numa-domain 1 on pci8 [...] ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ioat15: <IVB IOAT Ch7> mem 0x381ffff00000-0x381ffff03fff irq 63 at device 4.7 numa-domain 1 on pci8 [...] ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> [...] ichsmb0: <Intel Patsburg SMBus controller> port 0x1180-0x119f mem 0x380ffff20000-0x380ffff200ff irq 18 at device 31.3 numa-domain 0 on pci0 [...] smbus0: <System Management Bus> numa-domain 0 on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] ums0 numa-domain 0 on uhub3 [...] ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] uhid0 numa-domain 0 on uhub2 [...] uhid0: <HP Smartcard Keyboard Hotkey> on usbus1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] ugen1.3: <Chicony HP USB Smartcard CCID Keyboard> at usbus1 (disconnected) [...] ukbd1: at uhub2, port 1, addr 3 (disconnected) [...] ukbd1: detached [...] uhid0: at uhub2, port 1, addr 3 (disconnected) [...] uhid0: detached [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX, nxt 58, rcvif igb1, outif igb0 [...] 0 done [...] All buffers synced. [...] Uptime: 31m35s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.1-RELEASE-p8 stable/23.1-n250461-cf0d42d1ca7 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.13-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 12901679104 (12304 MB) [...] avail memory = 12375212032 (11801 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: < > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 20 23 4 12 7 19 1 10 8 5 11 18 6 13 2 9 16 21 17 22 3 14 15 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <SUPERM SMCI--MB> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 33 at device 2.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.2 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 41 at device 3.0 numa-domain 0 on pci0 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x8000-0x80ff mem 0x380fffc7c000-0x380fffc7ffff,0x380fff800000-0x380fffbfffff irq 16 at device 0.0 numa-domain 0 on pci4 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdfa02000-0xdfa023ff irq 16 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 numa-domain 0 on pci0 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] igb0: <Intel(R) I350 (Copper)> port 0x7020-0x703f mem 0xdf920000-0xdf93ffff,0xdf9c4000-0xdf9c7fff irq 16 at device 0.0 numa-domain 0 on pci5 [...] igb0: EEPROM V1.52-0 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 6 RX queues 6 TX queues [...] igb0: Using MSI-X interrupts with 7 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 [...] igb1: <Intel(R) I350 (Copper)> port 0x7000-0x701f mem 0xdf900000-0xdf91ffff,0xdf9c0000-0xdf9c3fff irq 17 at device 0.1 numa-domain 0 on pci5 [...] igb1: EEPROM V1.52-0 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 6 RX queues 6 TX queues [...] igb1: Using MSI-X interrupts with 7 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdfa01000-0xdfa013ff irq 23 at device 29.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 22 at device 1.0 numa-domain 0 on pci6 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xdfa00000-0xdfa007ff irq 18 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib7: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pci7: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci7: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib8: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci8: <ACPI PCI bus> numa-domain 1 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 57 at device 2.0 numa-domain 1 on pci8 [...] pci9: <ACPI PCI bus> numa-domain 1 on pcib9 [...] pcib10: <ACPI PCI-PCI bridge> irq 65 at device 3.0 numa-domain 1 on pci8 [...] pci10: <ACPI PCI bus> numa-domain 1 on pcib10 [...] pcib11: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci11: <ACPI PCI bus> numa-domain 1 on pcib11 [...] pci11: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci11: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci11: <dasp, performance counters> at device 19.5 (no driver attached) [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] Timecounter "TSC" frequency 2099999743 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <CT120BX500SSD1 M6CR013> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 [...] ukbd0 numa-domain 0 on uhub2 [...] ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 [...] kbd2 at ukbd0