[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz (3400.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33325297664 (31781 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: < > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 4 2 6 3 5 7 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <extra> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.3-k> mem 0xf5000000-0xf57fffff,0xf5808000-0xf580ffff irq 16 at device 0.0 on pci1 [...] ixl0: fw 4.22.27454 api 1.2 nvm 4.26 etid 80001609 oem 0.0.0 [...] ixl0: The driver for the device detected an older version of the NVM image than expected. [...] ixl0: Please update the NVM image. [...] ixl0: PF-ID[0]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 4 RX queues 4 TX queues [...] ixl0: Using MSI-X interrupts with 5 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 4 queues for PF LAN VSI; 4 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.3-k> mem 0xf4800000-0xf4ffffff,0xf5800000-0xf5807fff irq 16 at device 0.1 on pci1 [...] ixl1: fw 4.22.27454 api 1.2 nvm 4.26 etid 80001609 oem 0.0.0 [...] ixl1: The driver for the device detected an older version of the NVM image than expected. [...] ixl1: Please update the NVM image. [...] ixl1: PF-ID[1]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 4 RX queues 4 TX queues [...] ixl1: Using MSI-X interrupts with 5 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 4 queues for PF LAN VSI; 4 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7500000-0xf750ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7514000-0xf75143ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci3 [...] vgapci0: Boot video device [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb0: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xf7300000-0xf737ffff,0xf7380000-0xf7383fff irq 18 at device 0.0 on pci4 [...] igb0: EEPROM V3.16-0 eTrack 0x800004d7 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igb1: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xf7200000-0xf727ffff,0xf7280000-0xf7283fff irq 19 at device 0.0 on pci5 [...] igb1: EEPROM V3.16-0 eTrack 0x800004d9 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] mps0: <Avago Technologies (LSI) SAS2008> port 0xb000-0xb0ff mem 0xf71c0000-0xf71c3fff,0xf7180000-0xf71bffff irq 16 at device 0.0 on pci6 [...] mps0: Firmware: XXX.XXX.XXX.XXX, Driver: XXX.XXX.XXX.XXX-fbsd [...] mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7513000-0xf75133ff irq 22 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7512000-0xf75127ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1699998327 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub0 on usbus1 [...] uhub1 on usbus2 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus0 [...] uhub2: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] da0 at mps0 bus 0 scbus0 target 0 lun 0 [...] da0: <HITACHI HUSML402 CLAR200 C337> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 600.000MB/s transfers [...] da0: Command Queueing enabled [...] da0: 190782MB (390721968 512 byte sectors) [...] da4 at mps0 bus 0 scbus0 target 19 lun 0 [...] da4: <ATA INTEL SSDSC2BB12 FJ14> Fixed Direct Access SPC-4 SCSI device [...] da4: Serial Number... [...] da4: 600.000MB/s transfers [...] da4: Command Queueing enabled [...] da4: 114473MB (234441648 512 byte sectors) [...] da1 at mps0 bus 0 scbus0 target 6 lun 0 [...] da1: <HITACHI HUSML402 CLAR200 C337> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 600.000MB/s transfers [...] da1: Command Queueing enabled [...] da1: 190782MB (390721968 512 byte sectors) [...] da5 at mps0 bus 0 scbus0 target 20 lun 0 [...] da5: <ATA INTEL SSDSC2BB12 FJ14> Fixed Direct Access SPC-4 SCSI device [...] da5: Serial Number... [...] da5: 600.000MB/s transfers [...] da5: Command Queueing enabled [...] da5: 114473MB (234441648 512 byte sectors) [...] da2 at mps0 bus 0 scbus0 target 13 lun 0 [...] da2: <ATA TOSHIBA MG09ACA1 0105> Fixed Direct Access SPC-4 SCSI device [...] da2: Serial Number... [...] da2: 600.000MB/s transfers [...] da2: Command Queueing enabled [...] da2: 17166336MB (35156656128 512 byte sectors) [...] da3 at mps0 bus 0 scbus0 target 18 lun 0 [...] da3: <ATA TOSHIBA MG09ACA1 0105> Fixed Direct Access SPC-4 SCSI device [...] da3: Serial Number... [...] da3: 600.000MB/s transfers [...] da3: Command Queueing enabled [...] da3: 17166336MB (35156656128 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 21 ports with 21 removable, self powered [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] ugen0.2: <vendor 0x0557 product 0x7000> at usbus0 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] uhub5: 4 ports with 3 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] ugen0.3: <vendor 0x0557 product 0x2419> at usbus0 [...] ukbd0 on uhub5 [...] ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] kbd2 at ukbd0 [...] ugen0.4: <Kb KVM -COMPOSITE> at usbus0 [...] ukbd1 on uhub2 [...] ukbd1: <Kb KVM -COMPOSITE, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] kbd3 at ukbd1 [...] ichsmb0: <Intel Lynx Point SMBus controller> port 0x580-0x59f mem 0xf7511000-0xf75110ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] pchtherm0: <Haswell Thermal Subsystem> mem 0xf7510000-0xf7510fff irq 18 at device 31.6 on pci0 [...] bridge12: Ethernet address: ... [...] bridge20: Ethernet address: ... [...] bridge60: Ethernet address: ... [...] bridge70: Ethernet address: ... [...] bridge80: Ethernet address: ... [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lo0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0.10: link state changed to UP [...] bridge12: link state changed to UP [...] igb0: promiscuous mode enabled [...] igb1: promiscuous mode enabled [...] lagg0: promiscuous mode enabled [...] lagg0.12: promiscuous mode enabled [...] lagg0.20: promiscuous mode enabled [...] bridge20: link state changed to UP [...] lagg0.60: promiscuous mode enabled [...] bridge60: link state changed to UP [...] lagg0.70: promiscuous mode enabled [...] bridge70: link state changed to UP [...] lagg0.80: promiscuous mode enabled [...] bridge80: link state changed to UP [...] ums0 on uhub5 [...] ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] uhid0 on uhub2 [...] uhid0: <Kb KVM -COMPOSITE, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] ums1 on uhub2 [...] ums1: <Kb KVM -COMPOSITE, class 0/0, rev 1.10/1.00, addr 3> on usbus0 [...] ums1: 3 buttons and [XYZ] coordinates ID=0 [...] pflog0: promiscuous mode enabled