[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-STABLE GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 2560x1440 [...] CPU: AMD Ryzen 7 2700X Eight-Core Processor (3700.64-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16517738496 (15752 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads [...] arc4random: no preloaded entropy cache [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 13 15 11 14 10 4 2 5 8 12 9 1 7 6 3 [...] Timecounter "TSC-low" frequency 1850321733 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8119be40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xf7b00000-0xf7b03fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xf000-0xf01f mem 0xf7600000-0xf761ffff,0xf7620000-0xf7623fff irq 30 at device 0.0 on pci4 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <unknown> at device 0.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7300000-0xf73fffff irq 28 at device 0.1 on pci5 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7200000-0xf72fffff irq 30 at device 0.3 on pci5 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci6: <PCI bus> on pcib6 [...] ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xf7500000-0xf75007ff irq 29 at device 0.0 on pci6 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] pcib7: <PCI-PCI bridge> irq 30 at device 10.0 on pci3 [...] pci7: <PCI bus> on pcib7 [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xf7400000-0xf74007ff irq 30 at device 0.0 on pci7 [...] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 54 at device 0.0 on pci8 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xf7080000-0xf7083fff irq 55 at device 0.1 on pci8 [...] pcib9: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <unknown> at device 0.0 (no driver attached) [...] pci9: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xf7700000-0xf77fffff irq 37 at device 0.3 on pci9 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pci10: <unknown> at device 0.0 (no driver attached) [...] ahci2: <AMD KERNCZ AHCI SATA controller> mem 0xf7a08000-0xf7a08fff irq 42 at device 0.2 on pci10 [...] ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich5: <AHCI channel> at channel 0 on ahci2 [...] hdac1: <AMD X370 HDA Controller> mem 0xf7a00000-0xf7a07fff irq 43 at device 0.3 on pci10 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] arc4random: no preloaded entropy cache [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Sabrent> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALCS1200A (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] Trying to mount root from zfs:tank/ROOT/initial []... [...] Root mount waiting for: CAM [...] ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCC Solid State Disk SAFM01.6> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228935MB (468860015 512 byte sectors) [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] uhub0: 8 ports with 8 removable, self powered [...] uhub1: 10 ports with 10 removable, self powered [...] uhub2: 10 ports with 10 removable, self powered [...] lo0: link state changed to UP [...] ugen2.2: <Logitech USB Keyboard> at usbus2 [...] ukbd0 on uhub0 [...] ukbd0: <USB Keyboard> on usbus2 [...] kbd2 at ukbd0 [...] ugen0.2: <Wacom Co.,Ltd. CTH-670> at usbus0 [...] ugen1.2: <Valve Software Steam Controller> at usbus1 [...] ukbd2 on uhub2 [...] ukbd2: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] ums1 on uhub1 [...] ums1: <Wacom Co.,Ltd. CTH-670, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] kbd3 at ukbd2 [...] ums1: 6 buttons and [XY] coordinates ID=1 [...] uhid1 on uhub2 [...] uhid1: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] uhid2 on uhub1 [...] uhid2: <Wacom Co.,Ltd. CTH-670, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhid0 on uhub0 [...] uhid0: <USB Keyboard> on usbus2 [...] uhid3 on uhub2 [...] uhid3: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] uhid4 on uhub2 [...] uhid4: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] uhid5 on uhub2 [...] uhid5: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] uhub3: MTT enabled [...] ugen2.3: <ELECOM ELECOM TrackBall Mouse> at usbus2 [...] ums0 on uhub0 [...] ums0: <ELECOM ELECOM TrackBall Mouse, class 0/0, rev 2.00/1.10, addr 2> on usbus2 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] uhub3: 3 ports with 2 removable, self powered [...] ugen2.4: <Microsoft Microsoft LifeCam Cinema(TM)> at usbus2 [...] uaudio0 on uhub0 [...] uaudio0: <Microsoft Microsoft LifeCam Cinema(TM), class 239/2, rev 2.00/1.07, addr 3> on usbus2 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 22050 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] ugen2.5: <RetroUSB.com Genesis RetroBox> at usbus2 [...] uhid6 on uhub0 [...] uhid6: <EP10In> on usbus2 [...] uhub4: 3 ports with 1 removable, self powered [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] ugen0.5: <Cooler Master Technology Inc. AMD SR4 lamplight Control> at usbus0 [...] ukbd1 on uhub1 [...] ukbd1: <Cooler Master Technology Inc. AMD SR4 lamplight Control, class 0/0, rev 2.00/11.01, addr 4> on usbus0 [...] kbd4 at ukbd1 [...] uhid7 on uhub1 [...] uhid7: <CYRM02p0303h00E0r0100> on usbus0 [...] uhid8 on uhub1 [...] uhid8: <Cooler Master Technology Inc. AMD SR4 lamplight Control, class 0/0, rev 2.00/11.01, addr 4> on usbus0 [...] igb0: link state changed to UP [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub1 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ums1: at uhub1, port 1, addr 1 (disconnected) [...] ums1: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub1, port 2, addr 2 (disconnected) [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub4: at uhub3, port 3, addr 3 (disconnected) [...] uhub4: detached [...] uhub3: detached [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub1, port 10, addr 5 (disconnected) [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub6: at uhub5, port 3, addr 6 (disconnected) [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 (disconnected) [...] umass0: at uhub6, port 1, addr 7 (disconnected) [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 3 ports with 2 removable, self powered [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 3 ports with 1 removable, self powered [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub1 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] pid 3243 (bsdisks), jid 0, uid 0: exited on signal 6 (core dumped) [...] ugen1.3: <Apple Inc. iPhone> at usbus1 [...] ugen1.3: <Apple Inc. iPhone> at usbus1 (disconnected) [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub1, port 2, addr 2 (disconnected) [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub4: at uhub3, port 3, addr 3 (disconnected) [...] uhub4: detached [...] uhub3: detached [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub1, port 10, addr 5 (disconnected) [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub6: at uhub5, port 3, addr 6 (disconnected) [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 (disconnected) [...] umass0: at uhub6, port 1, addr 7 (disconnected) [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 3 ports with 2 removable, self powered [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 3 ports with 1 removable, self powered [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub1 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] pid 3178 (gnome-keyring-daemo), jid 0, uid 1002: exited on signal 11 (core dumped) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] Uptime: 3h18m21s [...] ukbd0: detached [...] uhid0: detached [...] ums0: detached [...] pcm6: detached [...] uaudio0: detached [...] uhid6: detached [...] ukbd2: detached [...] uhid1: detached [...] uhid3: detached [...] uhid4: detached [...] uhid5: detached [...] uhid2: detached [...] uhub4: detached [...] uhub3: detached [...] ukbd1: detached [...] uhid7: detached [...] uhid8: detached [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-STABLE GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 2560x1440 [...] CPU: AMD Ryzen 7 2700X Eight-Core Processor (3700.09-MHz K8-class CPU) [...] Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2 [...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> [...] Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> [...] AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX> [...] Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr> [...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16517738496 (15752 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads [...] arc4random: no preloaded entropy cache [...] ioapic0 <Version 2.1> irqs 0-23 on motherboard [...] ioapic1 <Version 2.1> irqs 24-55 on motherboard [...] Launching APs: 13 12 8 9 10 14 1 4 3 15 5 2 11 7 6 [...] Timecounter "TSC-low" frequency 1850042679 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8119be40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.100 Fri May 29 08:11:49 UTC 2020 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard [...] acpi0: <ALASKA A M I > on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 350 [...] Event timer "HPET2" frequency 14318180 Hz quality 350 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0xf7b00000-0xf7b03fff irq 24 at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xf000-0xf01f mem 0xf7600000-0xf761ffff,0xf7620000-0xf7623fff irq 30 at device 0.0 on pci4 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib5 [...] pci5: <unknown> at device 0.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7300000-0xf73fffff irq 28 at device 0.1 on pci5 [...] xhci0: 64 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7200000-0xf72fffff irq 30 at device 0.3 on pci5 [...] xhci1: 64 bytes context size, 64-bit DMA [...] xhci1: Unable to map MSI-X table [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib6: <PCI-PCI bridge> irq 29 at device 9.0 on pci3 [...] pci6: <PCI bus> on pcib6 [...] ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xf7500000-0xf75007ff irq 29 at device 0.0 on pci6 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] pcib7: <PCI-PCI bridge> irq 30 at device 10.0 on pci3 [...] pci7: <PCI bus> on pcib7 [...] ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xf7400000-0xf74007ff irq 30 at device 0.0 on pci7 [...] ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich4: <AHCI channel> at channel 0 on ahci1 [...] pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 54 at device 0.0 on pci8 [...] nvidia0: <Unknown> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xf7080000-0xf7083fff irq 55 at device 0.1 on pci8 [...] pcib9: <ACPI PCI-PCI bridge> at device 7.1 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <unknown> at device 0.0 (no driver attached) [...] pci9: <encrypt/decrypt> at device 0.2 (no driver attached) [...] xhci2: <XHCI (generic) USB 3.0 controller> mem 0xf7700000-0xf77fffff irq 37 at device 0.3 on pci9 [...] xhci2: 64 bytes context size, 64-bit DMA [...] xhci2: Unable to map MSI-X table [...] usbus2 on xhci2 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pci10: <unknown> at device 0.0 (no driver attached) [...] ahci2: <AMD KERNCZ AHCI SATA controller> mem 0xf7a08000-0xf7a08fff irq 42 at device 0.2 on pci10 [...] ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS [...] ahcich5: <AHCI channel> at channel 0 on ahci2 [...] hdac1: <AMD X370 HDA Controller> mem 0xf7a00000-0xf7a07fff irq 43 at device 0.3 on pci10 [...] isab0: <PCI-ISA bridge> at device 20.3 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_button0: <Power Button> on acpi0 [...] uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0 [...] uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0 [...] uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0 [...] uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. [...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] arc4random: no preloaded entropy cache [...] ugen0.1: <0x1022 XHCI root HUB> at usbus0 [...] ugen1.1: <0x1022 XHCI root HUB> at usbus1 [...] uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen2.1: <0x1022 XHCI root HUB> at usbus2 [...] uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Sabrent> NVMe namespace [...] nvd0: 976762MB (2000409264 512 byte sectors) [...] hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALCS1200A (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 [...] random: unblocking device. [...] arc4random: no preloaded entropy cache [...] Trying to mount root from zfs:tank/ROOT/initial []... [...] Root mount waiting for: CAM [...] ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 [...] ada0: <SPCC Solid State Disk SAFM01.6> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228935MB (468860015 512 byte sectors) [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] arc4random: no preloaded entropy cache [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 10 ports with 10 removable, self powered [...] uhub2: 10 ports with 10 removable, self powered [...] lo0: link state changed to UP [...] ugen2.2: <Logitech USB Keyboard> at usbus2 [...] ukbd0 on uhub1 [...] ukbd0: <USB Keyboard> on usbus2 [...] kbd2 at ukbd0 [...] ugen1.2: <Valve Software Steam Controller> at usbus1 [...] ukbd1 on uhub2 [...] ukbd1: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] kbd3 at ukbd1 [...] uhid0 on uhub2 [...] uhid0: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] uhid2 on uhub2 [...] uhid2: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] ugen0.2: <Wacom Co.,Ltd. CTH-670> at usbus0 [...] ums0 on uhub0 [...] ums0: <Wacom Co.,Ltd. CTH-670, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhid1 on uhub1 [...] uhid3 on uhub2 [...] uhid3: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] ums0: 6 buttons and [XY] coordinates ID=1 [...] uhid1: <USB Keyboard> on usbus2 [...] uhid5 on uhub0 [...] uhid5: <Wacom Co.,Ltd. CTH-670, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhid4 on uhub2 [...] uhid4: <Valve Software Steam Controller, class 0/0, rev 2.00/0.01, addr 1> on usbus1 [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] ugen2.3: <ELECOM ELECOM TrackBall Mouse> at usbus2 [...] uhub3: MTT enabled [...] ums1 on uhub1 [...] ums1: <ELECOM ELECOM TrackBall Mouse, class 0/0, rev 2.00/1.10, addr 2> on usbus2 [...] ums1: 5 buttons and [XYZT] coordinates ID=1 [...] uhub3: 3 ports with 2 removable, self powered [...] ugen2.4: <Microsoft Microsoft LifeCam Cinema(TM)> at usbus2 [...] uaudio0 on uhub1 [...] uaudio0: <Microsoft Microsoft LifeCam Cinema(TM), class 239/2, rev 2.00/1.07, addr 3> on usbus2 [...] uaudio0: No playback. [...] uaudio0: Record[0]: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 22050 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: Record[0]: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer. [...] uaudio0: No MIDI sequencer. [...] pcm6: <USB audio> on uaudio0 [...] uaudio0: No HID volume keys found. [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] ugen2.5: <RetroUSB.com Genesis RetroBox> at usbus2 [...] uhid6 on uhub1 [...] uhid6: <EP10In> on usbus2 [...] uhub4: 3 ports with 1 removable, self powered [...] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled [...] ugen0.5: <Cooler Master Technology Inc. AMD SR4 lamplight Control> at usbus0 [...] ukbd2 on uhub0 [...] ukbd2: <Cooler Master Technology Inc. AMD SR4 lamplight Control, class 0/0, rev 2.00/11.01, addr 4> on usbus0 [...] kbd4 at ukbd2 [...] uhid7 on uhub0 [...] uhid7: <CYRM02p0303h00E0r0100> on usbus0 [...] uhid8 on uhub0 [...] uhid8: <Cooler Master Technology Inc. AMD SR4 lamplight Control, class 0/0, rev 2.00/11.01, addr 4> on usbus0 [...] igb0: link state changed to UP [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub0 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ums0: at uhub0, port 1, addr 1 (disconnected) [...] ums0: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub0, port 2, addr 2 (disconnected) [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub4: at uhub3, port 3, addr 3 (disconnected) [...] uhub4: detached [...] uhub3: detached [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub0, port 10, addr 5 (disconnected) [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub6: at uhub5, port 3, addr 6 (disconnected) [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 (disconnected) [...] umass0: at uhub6, port 1, addr 7 (disconnected) [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 3 ports with 2 removable, self powered [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 3 ports with 1 removable, self powered [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub0 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub0, port 2, addr 2 (disconnected) [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub4: at uhub3, port 3, addr 3 (disconnected) [...] uhub4: detached [...] uhub3: detached [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub0, port 10, addr 5 (disconnected) [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub6: at uhub5, port 3, addr 6 (disconnected) [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 (disconnected) [...] umass0: at uhub6, port 1, addr 7 (disconnected) [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 3 ports with 2 removable, self powered [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 3 ports with 1 removable, self powered [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub0 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub0, port 2, addr 2 (disconnected) [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub4: at uhub3, port 3, addr 3 (disconnected) [...] uhub4: detached [...] uhub3: detached [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub0, port 10, addr 5 (disconnected) [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub6: at uhub5, port 3, addr 6 (disconnected) [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 (disconnected) [...] umass0: at uhub6, port 1, addr 7 (disconnected) [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 3 ports with 2 removable, self powered [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 3 ports with 1 removable, self powered [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub0 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub0, port 2, addr 2 (disconnected) [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub4: at uhub3, port 3, addr 3 (disconnected) [...] uhub4: detached [...] uhub3: detached [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub0, port 10, addr 5 (disconnected) [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub6: at uhub5, port 3, addr 6 (disconnected) [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 (disconnected) [...] umass0: at uhub6, port 1, addr 7 (disconnected) [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 3 ports with 2 removable, self powered [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 3 ports with 1 removable, self powered [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub0 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub3: at uhub0, port 2, addr 2 (disconnected) [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected) [...] uhub4: at uhub3, port 3, addr 3 (disconnected) [...] uhub4: detached [...] uhub3: detached [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub5: at uhub0, port 10, addr 5 (disconnected) [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 (disconnected) [...] uhub6: at uhub5, port 3, addr 6 (disconnected) [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 (disconnected) [...] umass0: at uhub6, port 1, addr 7 (disconnected) [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached [...] uhub6: detached [...] uhub5: detached [...] ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/52.10, addr 2> on usbus0 [...] uhub3: MTT enabled [...] uhub3: 3 ports with 2 removable, self powered [...] ugen0.4: <GenesysLogic USB2.0 Hub> at usbus0 [...] uhub4 on uhub3 [...] uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/87.21, addr 3> on usbus0 [...] uhub4: MTT enabled [...] uhub4: 3 ports with 1 removable, self powered [...] ugen0.6: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub5 on uhub0 [...] uhub5: <GenesysLogic> on usbus0 [...] uhub5: 3 ports with 2 removable, self powered [...] ugen0.7: <GenesysLogic USB3.1 Hub> at usbus0 [...] uhub6 on uhub5 [...] uhub6: <GenesysLogic> on usbus0 [...] uhub6: 3 ports with 1 removable, self powered [...] ugen0.8: <Generic USB3.0 Card Reader> at usbus0 [...] umass0 on uhub6 [...] umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.31, addr 7> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:3:0: Attached to scbus3 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1531> Removable Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 400.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>