[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.3-RELEASE-p2 stable/25.7-n271638-c7adca0552b5 SMP amd64 [...] FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) [...] [1] VT(efifb): resolution 640x480 [...] [1] CPU: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz (3392.41-MHz K8-class CPU) [...] [1] Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 [...] [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] [1] Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] [1] AMD Features2=0x1<LAHF> [...] [1] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] [1] Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> [...] [1] XSAVE Features=0x1<XSAVEOPT> [...] [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] [1] TSC: P-state invariant, performance statistics [...] [1] real memory = 17179869184 (16384 MB) [...] [1] avail memory = 16578605056 (15810 MB) [...] [1] Event timer "LAPIC" quality 600 [...] [1] ACPI APIC Table: <DELL PE_SC3 > [...] [1] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] [1] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] [1] random: registering fast source Intel Secure Key RNG [...] [1] random: fast provider: "Intel Secure Key RNG" [...] [1] random: unblocking device. [...] [1] ioapic0 <Version 2.0> irqs 0-23 [...] [1] Launching APs: 1 7 6 2 3 5 4 [...] [1] random: entropy device external interface [...] [1] wlan: mac acl policy registered [...] [1] kbd0 at kbdmux0 [...] [1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] [1] efirtc0: <EFI Realtime Clock> [...] [1] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] smbios0: <System Management BIOS> at iomem 0xbf6aef98-0xbf6aefb6 [...] [1] smbios0: Entry point: v2.1 (32-bit), Version: 2.7, BCD Revision: 2.7 [...] [1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] [1] acpi0: <DELL PE_SC3> [...] [1] acpi0: Power Button (fixed) [...] [1] cpu0: <ACPI CPU> on acpi0 [...] [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] [1] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] [1] Event timer "HPET" frequency 14318180 Hz quality 550 [...] [1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] [1] atrtc0: Warning: Couldn't map I/O. [...] [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] [1] Event timer "RTC" frequency 32768 Hz quality 0 [...] [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] [1] Event timer "i8254" frequency 1193182 Hz quality 100 [...] [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] [1] pci0: <ACPI PCI bus> on pcib0 [...] [1] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] [1] pci1: <ACPI PCI bus> on pcib1 [...] [1] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] [1] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xc5a06000-0xc5a063ff irq 20 at device 26.0 on pci0 [...] [1] usbus0: EHCI version 1.0 [...] [1] usbus0 on ehci0 [...] [1] usbus0: 480Mbps High Speed USB v2.0 [...] [1] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] [1] pci2: <ACPI PCI bus> on pcib2 [...] [1] bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xc0000000-0xc1ffffff irq 16 at device 0.0 on pci2 [...] [1] miibus0: <MII bus> on bce0 [...] [1] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] [1] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] [1] bce0: Using defaults for TSO: 65518/35/2048 [...] [1] bce0: Ethernet address: ... [...] [1] bce0: ASIC (0x57092008); [...] [1] bce0: link state changed to DOWN [...] [1] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.4.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) [...] [1] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] [1] bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xc2000000-0xc3ffffff irq 17 at device 0.1 on pci2 [...] [1] miibus1: <MII bus> on bce1 [...] [1] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] [1] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] [1] bce1: Using defaults for TSO: 65518/35/2048 [...] [1] bce1: Ethernet address: ... [...] [1] bce1: ASIC (0x57092008); [...] [1] bce1: link state changed to DOWN [...] [1] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.4.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) [...] [1] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] [1] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xc5a05000-0xc5a053ff irq 23 at device 29.0 on pci0 [...] [1] usbus1: EHCI version 1.0 [...] [1] usbus1 on ehci1 [...] [1] usbus1: 480Mbps High Speed USB v2.0 [...] [1] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] [1] pci3: <ACPI PCI bus> on pcib3 [...] [1] vgapci0: <VGA-compatible display> mem 0xc4800000-0xc4ffffff,0xc5800000-0xc5803fff,0xc5000000-0xc57fffff irq 19 at device 3.0 on pci3 [...] [1] vgapci0: Boot video device [...] [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] [1] isa0: <ISA bus> on isab0 [...] [1] ahci0: <Intel Cougar Point AHCI SATA controller> port 0x2048-0x204f,0x2054-0x2057,0x2040-0x2047,0x2050-0x2053,0x2020-0x203f mem 0xc5a04000-0xc5a047ff irq 19 at device 31.2 on pci0 [...] [1] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] [1] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] [1] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] [1] apei0: <ACPI Platform Error Interface> on acpi0 [...] [1] acpi_tz0: <Thermal Zone> on acpi0 [...] [1] acpi_syscontainer0: <System Container> on acpi0 [...] [1] acpi_syscontainer1: <System Container> on acpi0 [...] [1] orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 [...] [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] [1] cpufreq0: <CPU frequency control> on cpu0 [...] [1] cpufreq1: <CPU frequency control> on cpu1 [...] [1] cpufreq2: <CPU frequency control> on cpu2 [...] [1] cpufreq3: <CPU frequency control> on cpu3 [...] [1] cpufreq4: <CPU frequency control> on cpu4 [...] [1] cpufreq5: <CPU frequency control> on cpu5 [...] [1] cpufreq6: <CPU frequency control> on cpu6 [...] [1] cpufreq7: <CPU frequency control> on cpu7 [...] [1] Timecounter "TSC-low" frequency 1696147133 Hz quality 1000 [...] [1] Timecounters tick every 1.000 msec [...] [1] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] [1] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] [1] uhub0 on usbus1 [...] [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] [1] uhub1 on usbus0 [...] [1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] [2] ZFS filesystem version: 5 [...] [2] ZFS storage pool version: features support (5000) [...] [2] Trying to mount root from zfs:zroot/ROOT/default []... [...] [2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <KINGSTON SA400S37240G SAJ20103> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] [2] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] [2] ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] [2] uhub1: 2 ports with 2 removable, self powered [...] [2] uhub0: 2 ports with 2 removable, self powered [...] [3] Root mount waiting for: usbus0 usbus1 [...] [3] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] [3] uhub2 on uhub1 [...] [3] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] [3] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] [3] uhub3 on uhub0 [...] [3] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] [4] Root mount waiting for: usbus0 usbus1 [...] [4] uhub2: 6 ports with 6 removable, self powered [...] [4] uhub3: 6 ports with 6 removable, self powered [...] [4] ugen1.3: <vendor 0x0424 product 0x2514> at usbus1 [...] [4] uhub4 on uhub3 [...] [4] uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 3> on usbus1 [...] [4] uhub4: MTT enabled [...] [5] uhub4: 2 ports with 2 removable, self powered [...] [5] Root mount waiting for: usbus1 [...] [5] ugen1.4: <Logitech USB Optical Mouse> at usbus1 [...] [6] ugen1.5: <Usb KeyBoard Usb KeyBoard> at usbus1 [...] [6] ukbd0 on uhub4 [...] [6] ukbd0: <Usb KeyBoard Usb KeyBoard, class 0/0, rev 1.10/1.10, addr 5> on usbus1 [...] [6] kbd1 at ukbd0