[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p9 stable/24.1-n254969-8659880248c SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-9500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16470220800 (15707 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 859B > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 4 2 5 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcee75000-0xcee7501e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] pci1: <network, ethernet> at device 0.1 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xf4000000-0xf4ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xf5500000-0xf550ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4080-0x4087,0x4088-0x408b,0x4060-0x407f mem 0xf5510000-0xf5511fff,0xf5516000-0xf55160ff,0xf5515000-0xf55157ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf5404000-0xf5404fff,0xf5400000-0xf5403fff irq 16 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 18 at device 1.0 on pci4 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 2.0 on pci4 [...] pci6: <PCI bus> on pcib6 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xf5200000-0xf52fffff,0xf5300000-0xf5303fff irq 19 at device 0.0 on pci6 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <PCI-PCI bridge> irq 16 at device 3.0 on pci4 [...] pci7: <PCI bus> on pcib7 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xf5000000-0xf50fffff,0xf5100000-0xf5103fff irq 16 at device 0.0 on pci7 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <PCI-PCI bridge> irq 17 at device 4.0 on pci4 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> irq 18 at device 5.0 on pci4 [...] pci9: <PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> irq 19 at device 6.0 on pci4 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <PCI-PCI bridge> irq 16 at device 7.0 on pci4 [...] pci11: <PCI bus> on pcib11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999240 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mlx5_core0: <mlx5_core> mem 0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1 [...] mlx5: Mellanox Core driver 3.7.1 (November 2021)ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WD Blue SA510 2.5 250GB 52046100> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] mlx5_core0: INFO: mlx5_port_module_event:710:(pid 12): Module 0, status: unplugged [...] uhub0: 22 ports with 22 removable, self powered [...] ugen0.2: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint, class 0/0, rev 2.00/3.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] mlx5_core: INFO: (mlx5_core0): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mlx5_core1: <mlx5_core> mem 0xf0000000-0xf1ffffff irq 17 at device 0.1 on pci1 [...] mlx5_core1: INFO: mlx5_port_module_event:710:(pid 12): Module 1, status: unplugged [...] mlx5_core: INFO: (mlx5_core1): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mce0: Ethernet address: ... [...] mce0: link state changed to DOWN [...] mce1: Ethernet address: ... [...] mce1: link state changed to DOWN [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] re0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x4000003000-0x4000003fff at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0x4000000000-0x40000000ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub0 [...] ums0: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint, class 0/0, rev 2.00/3.00, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] mce0: ERR: mlx5e_ioctl:3514:(pid 38368): tso4 disabled due to -txcsum. [...] mce0: ERR: mlx5e_ioctl:3527:(pid 38806): tso6 disabled due to -txcsum6. [...] mce1: ERR: mlx5e_ioctl:3514:(pid 41290): tso4 disabled due to -txcsum. [...] mce1: ERR: mlx5e_ioctl:3527:(pid 41941): tso6 disabled due to -txcsum6. [...] igc1: link state changed to DOWN [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] vlan0: changing name to 'vlan0.7' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] ng0: changing name to 'pppoe0' [...] mce0: INFO: mlx5e_open_locked:3265:(pid 47152): NOTE: There are more RSS buckets(8) than channels(6) available [...] vlan1: changing name to 'vlan0.30' [...] vlan2: changing name to 'vlan0.20' [...] vlan3: changing name to 'vlan0.40' [...] vlan4: changing name to 'vlan0.41' [...] vlan5: changing name to 'vlan0.50' [...] mlx5_core0: INFO: mlx5_port_module_event:705:(pid 12): Module 0, status: plugged and enabled [...] mce0: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.40: link state changed to UP [...] vlan0.41: link state changed to UP [...] vlan0.30: link state changed to UP [...] mce0: link state changed to DOWN [...] vlan0.50: link state changed to DOWN [...] vlan0.20: link state changed to DOWN [...] vlan0.40: link state changed to DOWN [...] vlan0.41: link state changed to DOWN [...] vlan0.30: link state changed to DOWN [...] mce0: link state changed to UP [...] vlan0.50: link state changed to UP [...] vlan0.20: link state changed to UP [...] vlan0.40: link state changed to UP [...] vlan0.41: link state changed to UP [...] vlan0.30: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] [fib_algo] inet.0 (bsearch4#51) rebuild_fd_flm: switching algo to radix4_lockless [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1h7m1s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-9500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16470224896 (15707 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 859B > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 5 1 4 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcee75000-0xcee7501e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] pci1: <network, ethernet> at device 0.1 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xf4000000-0xf4ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xf5500000-0xf550ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4080-0x4087,0x4088-0x408b,0x4060-0x407f mem 0xf5510000-0xf5511fff,0xf5516000-0xf55160ff,0xf5515000-0xf55157ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf5404000-0xf5404fff,0xf5400000-0xf5403fff irq 16 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 18 at device 1.0 on pci4 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 2.0 on pci4 [...] pci6: <PCI bus> on pcib6 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xf5200000-0xf52fffff,0xf5300000-0xf5303fff irq 19 at device 0.0 on pci6 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <PCI-PCI bridge> irq 16 at device 3.0 on pci4 [...] pci7: <PCI bus> on pcib7 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xf5000000-0xf50fffff,0xf5100000-0xf5103fff irq 16 at device 0.0 on pci7 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <PCI-PCI bridge> irq 17 at device 4.0 on pci4 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> irq 18 at device 5.0 on pci4 [...] pci9: <PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> irq 19 at device 6.0 on pci4 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <PCI-PCI bridge> irq 16 at device 7.0 on pci4 [...] pci11: <PCI bus> on pcib11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999571 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mlx5_core0: <mlx5_core> mem 0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1 [...] mlx5: Mellanox Core driver 3.7.1 (November 2021)ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WD Blue SA510 2.5 250GB 52046100> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] mlx5_core0: INFO: mlx5_port_module_event:705:(pid 12): Module 0, status: plugged and enabled [...] uhub0: 22 ports with 22 removable, self powered [...] ugen0.2: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint, class 0/0, rev 2.00/3.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] mlx5_core: INFO: (mlx5_core0): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mlx5_core1: <mlx5_core> mem 0xf0000000-0xf1ffffff irq 17 at device 0.1 on pci1 [...] mlx5_core1: INFO: mlx5_port_module_event:710:(pid 12): Module 1, status: unplugged [...] mlx5_core: INFO: (mlx5_core1): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mce0: Ethernet address: ... [...] mce0: link state changed to DOWN [...] mce1: Ethernet address: ... [...] mce1: link state changed to DOWN [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] re0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] pchtherm0: <CannonLake-H Thermal Subsystem> mem 0x4000003000-0x4000003fff at device 18.0 on pci0 [...] ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0x4000000000-0x40000000ff irq 16 at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub0 [...] ums0: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint, class 0/0, rev 2.00/3.00, addr 1> on usbus0 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] mce0: ERR: mlx5e_ioctl:3514:(pid 36839): tso4 disabled due to -txcsum. [...] mce0: ERR: mlx5e_ioctl:3527:(pid 37070): tso6 disabled due to -txcsum6. [...] mce1: ERR: mlx5e_ioctl:3514:(pid 40379): tso4 disabled due to -txcsum. [...] mce1: ERR: mlx5e_ioctl:3527:(pid 40479): tso6 disabled due to -txcsum6. [...] mce0: INFO: mlx5e_open_locked:3265:(pid 44154): NOTE: There are more RSS buckets(8) than channels(6) available [...] mce0: link state changed to UP [...] vlan0: changing name to 'vlan0.20' [...] vlan1: changing name to 'vlan0.30' [...] vlan2: changing name to 'vlan0.40' [...] vlan3: changing name to 'vlan0.41' [...] vlan4: changing name to 'vlan0.50' [...] igc0: link state changed to DOWN [...] vlan5: changing name to 'vlan0.7' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] ng0: changing name to 'pppoe0' [...] igc1: link state changed to DOWN [...] igc0: link state changed to UP [...] vlan0.7: link state changed to UP [...] igc1: link state changed to UP [...] [fib_algo] inet.0 (bsearch4#22) rebuild_fd_flm: switching algo to radix4_lockless [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 11m13s [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255007-1d6e165fb40 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 1024x768 [...] CPU: Intel(R) Core(TM) i5-9500 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] Structured Extended Features2=0x40000000<SGXLC> [...] Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x2000c04<RSBA> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16470224896 (15707 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 859B > [...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 5 2 4 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xcee75000-0xcee7501e [...] smbios0: Version: 3.1, BCD Revision: 3.1 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-BPC> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <network, ethernet> at device 0.0 (no driver attached) [...] pci1: <network, ethernet> at device 0.1 (no driver attached) [...] vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xf4000000-0xf4ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xf5500000-0xf550ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4080-0x4087,0x4088-0x408b,0x4060-0x407f mem 0xf5510000-0xf5511fff,0xf5516000-0xf55160ff,0xf5515000-0xf55157ff irq 16 at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf5404000-0xf5404fff,0xf5400000-0xf5403fff irq 16 at device 0.0 on pci2 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <PCI-PCI bridge> irq 18 at device 1.0 on pci4 [...] pci5: <PCI bus> on pcib5 [...] pcib6: <PCI-PCI bridge> irq 19 at device 2.0 on pci4 [...] pci6: <PCI bus> on pcib6 [...] igc0: <Intel(R) Ethernet Controller I225-V> mem 0xf5200000-0xf52fffff,0xf5300000-0xf5303fff irq 19 at device 0.0 on pci6 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <PCI-PCI bridge> irq 16 at device 3.0 on pci4 [...] pci7: <PCI bus> on pcib7 [...] igc1: <Intel(R) Ethernet Controller I225-V> mem 0xf5000000-0xf50fffff,0xf5100000-0xf5103fff irq 16 at device 0.0 on pci7 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <PCI-PCI bridge> irq 17 at device 4.0 on pci4 [...] pci8: <PCI bus> on pcib8 [...] pcib9: <PCI-PCI bridge> irq 18 at device 5.0 on pci4 [...] pci9: <PCI bus> on pcib9 [...] pcib10: <PCI-PCI bridge> irq 19 at device 6.0 on pci4 [...] pci10: <PCI bus> on pcib10 [...] pcib11: <PCI-PCI bridge> irq 16 at device 7.0 on pci4 [...] pci11: <PCI bus> on pcib11 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] Timecounter "TSC-low" frequency 1499999858 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mlx5_core0: <mlx5_core> mem 0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1 [...] mlx5: Mellanox Core driver 3.7.1 (November 2021)ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WD Blue SA510 2.5 250GB 52046100> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 [...] mlx5_core0: INFO: mlx5_port_module_event:705:(pid 12): Module 0, status: plugged and enabled [...] uhub0: 22 ports with 22 removable, self powered [...] ugen0.2: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <Lenovo ThinkPad Compact USB Keyboard with TrackPoint, class 0/0, rev 2.00/3.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] mlx5_core: INFO: (mlx5_core0): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mlx5_core1: <mlx5_core> mem 0xf0000000-0xf1ffffff irq 17 at device 0.1 on pci1 [...] mlx5_core1: INFO: mlx5_port_module_event:710:(pid 12): Module 1, status: unplugged [...] mlx5_core: INFO: (mlx5_core1): E-Switch: Total vports 9, l2 table size(65536), per vport: max uc(128) max mc(2048) [...] mce0: Ethernet address: ... [...] mce0: link state changed to DOWN [...] mce1: Ethernet address: ... [...] mce1: link state changed to DOWN [...] Trying to mount root from zfs:zroot/ROOT/default []...