[...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3392.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8195235840 (7815 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1696109946 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TC-FC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7980000-0xf79fffff,0xf7a0c000-0xf7a0ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf797ffff,0xf7a08000-0xf7a0bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7880000-0xf78fffff,0xf7a04000-0xf7a07fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf787ffff,0xf7a00000-0xf7a03fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c14000-0xf7c17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c1c000-0xf7c1c3ff irq 17 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c10000-0xf7c13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7b04000-0xf7b04fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c1b000-0xf7c1b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c1a000-0xf7c1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm4: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <LITEONIT LCS-128M6S 2.5 7mm 128GB DC7110D> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 17 ports with 17 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <CHICONY HP Basic USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] ugen0.3: <HUAWEI Technology HUAWEI Mobile> at usbus0 [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] ugen0.3: <HUAWEI Technology HUAWEI Mobile> at usbus0 (disconnected) [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] ugen0.3: <HUAWEI Technology HUAWEI Mobile> at usbus0 [...] u3g0 on uhub0 [...] u3g0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 3> on usbus0 [...] u3g0: Found 2 ports. [...] umass0 on uhub0 [...] umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:1:0: Attached to scbus1 [...] umass1 on uhub0 [...] umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 3> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0000 [...] umass1:2:1: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 128MB (65536 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim1 bus 1 scbus2 target 0 lun 0 [...] da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] interface u3g.1 already present in the KLD 'kernel'! [...] linker_load_file: /boot/kernel/u3g.ko - unsupported file type [...] cdce0 on uhub0 [...] cdce0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 3> on usbus0 [...] cdce0: faking MAC address [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] igb1: link state changed to DOWN [...] igb0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igb1 [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 6 4 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3392.21-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8195235840 (7815 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1696106976 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TC-FC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7980000-0xf79fffff,0xf7a0c000-0xf7a0ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf797ffff,0xf7a08000-0xf7a0bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7880000-0xf78fffff,0xf7a04000-0xf7a07fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf787ffff,0xf7a00000-0xf7a03fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c14000-0xf7c17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c1c000-0xf7c1c3ff irq 17 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c10000-0xf7c13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7b04000-0xf7b04fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c1b000-0xf7c1b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c1a000-0xf7c1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm4: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <LITEONIT LCS-128M6S 2.5 7mm 128GB DC7110D> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub1: 17 ports with 17 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <CHICONY HP Basic USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub3 on uhub2 [...] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] uhub3: 4 ports with 4 removable, self powered [...] uhub4: 6 ports with 6 removable, self powered [...] ugen0.3: <HUAWEI Technology HUAWEI Mobile> at usbus0 [...] u3g0 on uhub1 [...] u3g0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] u3g0: Found 2 ports. [...] umass0 on uhub1 [...] umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:1:0: Attached to scbus1 [...] umass1 on uhub1 [...] umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0000 [...] umass1:2:1: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 128MB (65536 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim1 bus 1 scbus2 target 0 lun 0 [...] da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] interface u3g.1 already present in the KLD 'kernel'! [...] linker_load_file: /boot/kernel/u3g.ko - unsupported file type [...] cdce0 on uhub1 [...] cdce0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] cdce0: faking MAC address [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb2: link state changed to DOWN [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan20' [...] vlan1: changing name to 'lagg0_vlan50' [...] igb0: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb0: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan50: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] lagg0: link state changed to DOWN [...] lagg0_vlan50: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] vlan0: changing name to 'lagg0_vlan20' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] vlan1: changing name to 'lagg0_vlan50' [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan50: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 5 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p12-HBSD #0 3c6040c7243(stable/21.1)-dirty: Mon Jan 25 12:27:52 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3392.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8195235840 (7815 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1696112144 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128f7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TC-FC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7980000-0xf79fffff,0xf7a0c000-0xf7a0ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf797ffff,0xf7a08000-0xf7a0bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7880000-0xf78fffff,0xf7a04000-0xf7a07fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf787ffff,0xf7a00000-0xf7a03fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c14000-0xf7c17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c1c000-0xf7c1c3ff irq 17 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c10000-0xf7c13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7b04000-0xf7b04fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c1b000-0xf7c1b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c1a000-0xf7c1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm4: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <LITEONIT LCS-128M6S 2.5 7mm 128GB DC7110D> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub0: 17 ports with 17 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.2: <CHICONY HP Basic USB Keyboard> at usbus0 [...] ukbd0 on uhub0 [...] ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] ugen0.3: <HUAWEI Technology HUAWEI Mobile> at usbus0 [...] u3g0 on uhub0 [...] u3g0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] u3g0: Found 2 ports. [...] umass0 on uhub0 [...] umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:1:0: Attached to scbus1 [...] umass1 on uhub0 [...] umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0000 [...] umass1:2:1: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 128MB (65536 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim1 bus 1 scbus2 target 0 lun 0 [...] da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] interface u3g.1 already present in the KLD 'kernel'! [...] linker_load_file: /boot/kernel/u3g.ko - unsupported file type [...] cdce0 on uhub0 [...] cdce0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] cdce0: faking MAC address [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb2: link state changed to DOWN [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan20' [...] vlan1: changing name to 'lagg0_vlan50' [...] igb0: link state changed to DOWN [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb0: link state changed to UP [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] lagg0: link state changed to UP [...] lagg0_vlan50: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] stf0: changing name to 'wan_stf' [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] lagg0: link state changed to DOWN [...] lagg0_vlan50: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] igb3: link state changed to DOWN [...] igb2: link state changed to DOWN [...] vlan0: changing name to 'lagg0_vlan20' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] vlan1: changing name to 'lagg0_vlan50' [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] lagg0: link state changed to UP [...] lagg0_vlan50: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 169 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p13-HBSD #0 5a415173060(stable/21.1)-dirty: Fri Feb 5 16:41:22 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3392.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8195235840 (7815 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1696111226 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TC-FC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7980000-0xf79fffff,0xf7a0c000-0xf7a0ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf797ffff,0xf7a08000-0xf7a0bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7880000-0xf78fffff,0xf7a04000-0xf7a07fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf787ffff,0xf7a00000-0xf7a03fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c14000-0xf7c17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c1c000-0xf7c1c3ff irq 17 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c10000-0xf7c13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7b04000-0xf7b04fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c1b000-0xf7c1b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c1a000-0xf7c1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm4: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <LITEONIT LCS-128M6S 2.5 7mm 128GB DC7110D> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 17 ports with 17 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.2: <CHICONY HP Basic USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub4: 4 ports with 4 removable, self powered [...] ugen0.3: <HUAWEI Technology HUAWEI Mobile> at usbus0 [...] u3g0 on uhub1 [...] u3g0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] u3g0: Found 2 ports. [...] umass0 on uhub1 [...] umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:1:0: Attached to scbus1 [...] umass1 on uhub1 [...] umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0000 [...] umass1:2:1: Attached to scbus2 [...] cd0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 128MB (65536 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim1 bus 1 scbus2 target 0 lun 0 [...] da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] interface u3g.1 already present in the KLD 'kernel'! [...] linker_load_file: /boot/kernel/u3g.ko - unsupported file type [...] cdce0 on uhub1 [...] cdce0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] cdce0: faking MAC address [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb2: link state changed to DOWN [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan20' [...] vlan1: changing name to 'lagg0_vlan50' [...] igb0: link state changed to DOWN [...] igb3: link state changed to UP [...] igb2: link state changed to UP [...] igb0: link state changed to UP [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] lagg0: link state changed to UP [...] lagg0_vlan50: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] pflog0: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 237 237 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p13-HBSD #0 5a415173060(stable/21.1)-dirty: Fri Feb 5 16:41:22 CET 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (3392.22-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x21<LAHF,ABM> [...] Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> [...] Structured Extended Features3=0x9c000600<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8195235840 (7815 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TC-FC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1696110280 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TC-FC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7980000-0xf79fffff,0xf7a0c000-0xf7a0ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 2 RX queues 2 TX queues [...] igb0: Using MSI-X interrupts with 3 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf797ffff,0xf7a08000-0xf7a0bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 2 RX queues 2 TX queues [...] igb1: Using MSI-X interrupts with 3 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7880000-0xf78fffff,0xf7a04000-0xf7a07fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 2 RX queues 2 TX queues [...] igb2: Using MSI-X interrupts with 3 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 2/1024, RX 2/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf787ffff,0xf7a00000-0xf7a03fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 2 RX queues 2 TX queues [...] igb3: Using MSI-X interrupts with 3 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 2/1024, RX 2/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] hdac0: <Intel Haswell HDA Controller> mem 0xf7c14000-0xf7c17fff irq 16 at device 3.0 on pci0 [...] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7c1c000-0xf7c1c3ff irq 17 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Lynx Point HDA Controller> mem 0xf7c10000-0xf7c13fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7b04000-0xf7b04fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: version:1.96.04 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Ethernet address: ... [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7c1b000-0xf7c1b3ff irq 23 at device 29.0 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c1a000-0xf7c1a7ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm3: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa1 [...] pcm4: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: 17 ports with 17 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen0.2: <CHICONY HP Basic USB Keyboard> at usbus0 [...] ukbd0 on uhub1 [...] ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 1> on usbus0 [...] kbd2 at ukbd0 [...] ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 [...] uhub4: 4 ports with 4 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] ugen0.3: <HUAWEI Technology HUAWEI Mobile> at usbus0 [...] u3g0 on uhub1 [...] u3g0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] u3g0: Found 2 ports. [...] umass0 on uhub1 [...] umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0x0000 [...] umass0:1:0: Attached to scbus1 [...] umass1 on uhub1 [...] umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] umass1: SCSI over Bulk-Only; quirks = 0x0000 [...] umass1:2:1: Attached to scbus2 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <LITEONIT LCS-128M6S 2.5 7mm 128GB DC7110D> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 122104MB (250069680 512 byte sectors) [...] cd0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device [...] cd0: 40.000MB/s transfers [...] cd0: 128MB (65536 2048 byte sectors) [...] cd0: quirks=0x10<10_BYTE_ONLY> [...] da0 at umass-sim1 bus 1 scbus2 target 0 lun 0 [...] da0: <HUAWEI TF CARD Storage 2.31> Removable Direct Access SCSI-2 device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x2<NO_6_BYTE> [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] interface u3g.1 already present in the KLD 'kernel'! [...] linker_load_file: /boot/kernel/u3g.ko - unsupported file type [...] cdce0 on uhub1 [...] cdce0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/1.02, addr 2> on usbus0 [...] cdce0: faking MAC address [...] ue0: <USB Ethernet> on cdce0 [...] ue0: Ethernet address: ... [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb2: link state changed to DOWN [...] lagg0: IPv6 addresses on igb2 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] igb3: link state changed to DOWN [...] lagg0: IPv6 addresses on igb3 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] vlan0: changing name to 'lagg0_vlan20' [...] vlan1: changing name to 'lagg0_vlan50' [...] igb0: link state changed to DOWN [...] igb2: link state changed to UP [...] igb0: link state changed to UP [...] stf0: changing name to 'wan_stf' [...] igb3: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] lagg0: link state changed to UP [...] lagg0_vlan50: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] stf0: changing name to 'wan_stf' [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on lagg0 [...] 227.601437 [1130] generic_netmap_attach Emulated adapter for lagg0 created (prev was NULL) [...] 227.601487 [1035] generic_netmap_dtor Emulated netmap adapter for lagg0 destroyed [...] 227.601743 [1130] generic_netmap_attach Emulated adapter for lagg0 created (prev was NULL) [...] 227.702147 [ 320] generic_netmap_register Emulated adapter for lagg0 activated [...] 717.773600 [ 295] generic_netmap_unregister Emulated adapter for lagg0 deactivated [...] 717.775422 [1035] generic_netmap_dtor Emulated netmap adapter for lagg0 destroyed