[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248053-232cb14f501 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(efifb): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (1596.06-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 103079215104 (98304 MB) [...] avail memory = 100302106624 (95655 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic1: MADT APIC ID 1 != hw id 0 [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 32-55 [...] Launching APs: 1 5 7 15 9 8 12 3 4 6 13 11 14 2 10 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xce000000-0xcfffffff irq 36 at device 0.0 on pci1 [...] miibus0: <MII bus> on bce0 [...] brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce0: Using defaults for TSO: 65518/35/2048 [...] bce0: Ethernet address: ... [...] bce0: ASIC (0x57092003); [...] bce0: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd0000000-0xd1ffffff irq 48 at device 0.1 on pci1 [...] miibus1: <MII bus> on bce1 [...] brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce1: Using defaults for TSO: 65518/35/2048 [...] bce1: Ethernet address: ... [...] bce1: ASIC (0x57092003); [...] bce1: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd2000000-0xd3ffffff irq 32 at device 0.0 on pci2 [...] miibus2: <MII bus> on bce2 [...] brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce2: Using defaults for TSO: 65518/35/2048 [...] bce2: Ethernet address: ... [...] bce2: ASIC (0x57092003); [...] bce2: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd4000000-0xd5ffffff irq 42 at device 0.1 on pci2 [...] miibus3: <MII bus> on bce3 [...] brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce3: Using defaults for TSO: 65518/35/2048 [...] bce3: Ethernet address: ... [...] bce3: ASIC (0x57092003); [...] bce3: link state changed to DOWN [...] Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] mfi0: <Dell PERC H700 Integrated> port 0xfc00-0xfcff mem 0xdf1bc000-0xdf1bffff,0xdf1c0000-0xdf1fffff irq 33 at device 0.0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 1008, limiting to 128 [...] mfi0: 12300 (697645217s/0x0020/info) - Shutdown command received from host [...] mfi0: 12301 (boot + 34s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/1f17/1028) [...] mfi0: 12302 (boot + 34s/0x0020/info) - Firmware version 2.100.03-4651 [...] mfi0: 12303 (boot + 36s/0x0008/info) - Battery Present [...] mfi0: 12304 (boot + 36s/0x0020/info) - Package version 12.10.7-0001 [...] mfi0: 12305 (boot + 36s/0x0020/info) - Board Revision A00 [...] mfi0: 12306 (boot + 61s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored [...] mfi0: 12307 (boot + 61s/0x0002/info) - Inserted: Encl PD 20 [...] mfi0: 12308 (boot + 61s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5948f090e277pcib4: <ACPI PCI-PCI bridge>a500,0000000000000000 [...] mfi0: 12309 (boot + 61s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] at device 5.0 on pci0 [...] mfi0: 12310 (boot + 61s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=5000c50062a7dpci4: <ACPI PCI bus>5c5,0000000000000000 [...] mfi0: 12311 (boot + 61s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive [...] on pcib4 [...] mfi0: 12312 (boot + 61s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 12313 (boot + 61s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=5000c50062896885,0000000000000000 [...] mfi0: 12314 (boot + 61s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive [...] mfi0: 12315 (boot + 61s/0x0002/info) - Inserted: PD 02(e0x20/s2) [...] pcib5: <ACPI PCI-PCI bridge> at device 6.0mfi0: 12316 (boot + 61s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=5000c50058d4c on pci0 [...] pci5: <ACPI PCI bus>0c9,0000000000000000 [...] mfi0: 12317 (boot + 61s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive [...] mfi0: 12318 (boot + 61s/0x0002/info) - Inserted: PD 03(e0x20/s3) [...] on pcib5 [...] mfi0: 12319 (boot + 61s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=5000c50084165cc1,0000000000000000 [...] mfi0: 12320 (boot + 61s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive [...] mfi0: 12321 (boot + 61s/0x0002/info) - Inserted: PD 04(e0x20/s4) [...] mfi0: 12322 (boot + 61s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c500848b6ae1,0000000000000000 [...] mfi0: 12323 (boot + 61s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive [...] mfi0: 12324 (boot + 61s/0x0002/info) - Inserted: PD 05(e0x20/s5) [...] pcib6: <PCI-PCI bridge> at device 0.0 on pci5 [...] mfi0: 12325 (boot + 61s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c50057fdfpci6: <PCI bus>429,0000000000000000 [...] on pcib6 [...] mfi0: 12326 (boot + 61s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive [...] mfi0: 12327 (boot + 62s/0x0042/info) - Dedicated Hot Spare created on PD 04(e0x20/s4) (ded,rev,ea,ac=1) [...] mfi0: 12328 (boot + 62s/0x0042/info) - Dedicated Hot Spare created on PD 05(e0x20/s5) (ded,rev,ea,ac=1) [...] mfi0: 12329 (697645329s/0x0020/info) - Time established as 02/08/22 14:22:09; (63 seconds since power on) [...] mfi0: 12330 (697645367s/0x0008/info) - Battery temperature is normal [...] mfi0: 12331 (697645367s/0x0008/FATAL) - Battery has failed and cannot support data retention. Please replace the battery [...] mfi0: 12332 (697645367s/0x0008/WARN) - BBU disabled; changing WB virtual disks to WT, Forced WB VDs are not affected [...] mfi0: 12333 (697645367s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=0d,ccp=0c,ap=0,dc=0,dbgi=0,S=0|0] from [ID=00,dcp=0d,ccp=0d,ap=0,dc=0,dbgi=0,S=0|0] [...] pcib7: <PCI-PCI bridge>mfi0: 12334 (697645449s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 5000c50062a7d5c5, CDB: 12 01 dc 01 22 00, Sense: 5/24/00 [...] mfi0: 12335 (697645449s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5000c50062896885, CDB: 12 01 dc 01 22 00, Sense: 5/24/00 [...] at device 2.0 on pci6 [...] pci7: <PCI bus>mfi0: 12336 (697645449s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 5000c50058d4c0c9, CDB: 12 01 dc 01 22 00, Sense: 4/cf/00 [...] mfi0: 12337 (697645450s/0x0002/info) - Unexpected sense: PD 03(e0x20/s3) Path 5000c50084165cc1, CDB: 12 01 dc 01 22 00, Sense: 5/24/00 [...] on pcib7 [...] mfi0: 12338 (697645450s/0x0002/info) - Unexpected sense: PD 04(e0x20/s4) Path 5000c500848b6ae1, CDB: 12 01 dc 01 22 00, Sense: 4/cf/00 [...] mfi0: 12339 (697645450s/0x0002/info) - Unexpected sense: PD 05(e0x20/s5) Path 5000c50057fdf429, CDB: 12 01 dc 01 22 00, Sense: 4/cf/00 [...] mfi0: 12340 (697645490s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 5000c50062a7d5c5, CDB: 12 01 dc 01 22 00, Sense: 5/24/00 [...] mfi0: 12341 (697645490s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5000c50062896885, CDB: 12 01 dc 01 22 00, Sense: 5/24/00 [...] mfi0: 12342 (697645490s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 5000c50058d4c0c9, CDB: 12 01 dc 01 22 00, Sense: bce4: <QLogic NetXtreme II BCM5709 1000Base-T (C0)>4/cf/00 [...] mfi0: 12343 (697645490s/0x0002/info) - Unexpected sense: PD 03(e0x20/s3) Path 5000c50084165cc1, CDB: 12 01 dc 01 22 00, Sense: mem 0xda000000-0xdbffffff irq 45 at device 0.0 on pci7 [...] 5/24/00 [...] mfi0: 12344 (697645490s/0x0002/info) - Unexpected sense: PD 04(e0x20/s4) Path 5000c500848b6ae1, CDB: 12 01 dc 01 22 00, Sense: 4/cf/00 [...] mfi0: 12345 (697645490s/0x0002/info) - Unexpected sense: PD 05(e0x20/s5) Path 5000c50057fdf429, CDB: 12 01 dc 01 22 00, Sense: miibus4: <MII bus>4/cf/00 [...] mfi0: 12346 (697645499s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 5000c50062a7d5c5, CDB: 12 01 dc 01 22 00, Sense: 5/24/00 [...] mfi0: 12347 (697645499s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 5000c50062896885, CDB: 12 01 dc 01 22 00, Sense: on bce4 [...] brgphy4: <BCM5709 10/100/1000baseT PHY>5/24/00 [...] mfi0: 12348 (697645499s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 5000c50058d4c0c9, CDB: 12 01 dc 01 22 00, Sense: 4/cf/00 [...] mfi0: 12349 (697645499s/0x0002/info) - Unexpected sense: PD 03(e0x20/s3) Path 5000c50084165cc1, CDB: 12 01 dc 01 22 00, Sense: PHY 1 on miibus4 [...] brgphy4: 5/24/00 [...] mfi0: 12350 (697645500s/0x0002/info) - Unexpected sense: PD 04(e0x20/s4) Path 5000c500848b6ae1, CDB: 12 01 dc 01 22 00, Sense: 4/cf/00 [...] mfi0: 12351 (697645500s/0x0002/info) - Unexpected sense: PD 05(e0x20/s5) Path 5000c50057fdf429, CDB: 12 01 dc 01 22 00, Sense: 4/cf/00 [...] 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce4: Using defaults for TSO: 65518/35/2048 [...] bce4: Ethernet address: ... [...] bce4: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce5: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 47 at device 0.1 on pci7 [...] miibus5: <MII bus> on bce5 [...] brgphy5: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus5 [...] brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce5: Using defaults for TSO: 65518/35/2048 [...] bce5: Ethernet address: ... [...] bce5: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib8: <PCI-PCI bridge> at device 4.0 on pci6 [...] pci8: <PCI bus> on pcib8 [...] bce6: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd6000000-0xd7ffffff irq 35 at device 0.0 on pci8 [...] miibus6: <MII bus> on bce6 [...] brgphy6: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus6 [...] brgphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce6: Using defaults for TSO: 65518/35/2048 [...] bce6: Ethernet address: ... [...] bce6: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] bce7: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd8000000-0xd9ffffff irq 46 at device 0.1 on pci8 [...] miibus7: <MII bus> on bce7 [...] brgphy7: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus7 [...] brgphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bce7: Using defaults for TSO: 65518/35/2048 [...] bce7: Ethernet address: ... [...] bce7: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) [...] Coal (RX:6,6,18,18; TX:20,20,80,80) [...] pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci0 [...] pci9: <ACPI PCI bus> on pcib9 [...] pci9: <network> at device 0.0 (no driver attached) [...] pcib10: <ACPI PCI-PCI bridge> at device 9.0 on pci0 [...] pci10: <ACPI PCI bus> on pcib10 [...] pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) [...] pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) [...] uhci0: <Intel 82801I (ICH9) USB controller> port 0xec40-0xec5f irq 17 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801I (ICH9) USB controller> port 0xec60-0xec7f irq 18 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0 [...] usbus2: EHCI version 1.0 [...] usbus2 on ehci0 [...] usbus2: 480Mbps High Speed USB v2.0 [...] uhci2: <Intel 82801I (ICH9) USB controller> port 0xec80-0xec9f irq 21 at device 29.0 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus3 on uhci2 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801I (ICH9) USB controller> port 0xeca0-0xecbf irq 20 at device 29.1 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0 [...] usbus5: EHCI version 1.0 [...] usbus5 on ehci1 [...] usbus5: 480Mbps High Speed USB v2.0 [...] pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci11: <ACPI PCI bus> on pcib11 [...] vgapci0: <VGA-compatible display> mem 0xcd800000-0xcdffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci11 [...] vgapci0: Boot video device [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH9 SATA300 controller> port 0xec10-0xec17,0xec08-0xec0b,0xec18-0xec1f,0xec0c-0xec0f,0xec20-0xec2f,0xec30-0xec3f irq 23 at device 31.2 on pci0 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] ata3: <ATA channel> at channel 1 on atapci0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcbfff,0xcc000-0xd1fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est15 attach returned 6 [...] Timecounter "TSC" frequency 1596001254 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] mfid0 on mfi0 [...] mfid0: 5721600MB (11717836800 sectors) RAID volume 'OPNsense' is optimal [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0 on usbus4 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] uhub1 on usbus1 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] uhub2 on usbus3 [...] uhub3 on usbus2 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub4 on usbus0 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen5.1: <Intel EHCI root HUB> at usbus5 [...] uhub5 on usbus5 [...] uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub5: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered [...] ugen2.2: <vendor 0x0424 product 0x2514> at usbus2 [...] uhub6 on uhub3 [...] uhub6: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus2 [...] uhub6: MTT enabled [...] uhub6: 3 ports with 3 removable, self powered [...] ugen0.2: <Logitech USB Keyboard> at usbus0 [...] ukbd0 on uhub4 [...] ugen3.2: <Avocent USB Composite Device-0> at usbus3 [...] ukbd1 on uhub2 [...] ukbd0: <USB Keyboard> on usbus0 [...] ukbd1: <Keyboard> on usbus3 [...] kbd2 at ukbd1 [...] kbd3 at ukbd0 [...] cd0 at ata2 bus 0 scbus0 target 0 lun 0 [...] cd0: <TEAC DVD-ROM DV-28SW R.2A> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] ums0 on uhub2 [...] ums0: <Mouse> on usbus3 [...] ums0: 3 buttons and [Z] coordinates ID=0 [...] uhid0 on uhub4 [...] uhid0: <USB Keyboard> on usbus0 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr c [...] device_attach: est15 attach returned 6 [...] bce1: Gigabit link up! [...] bce1: link state changed to UP [...] bce1: Gigabit link up! [...] bce1: Gigabit link up! [...] bce5: link state changed to DOWN [...] bce6: link state changed to DOWN [...] bce4: link state changed to DOWN [...] pflog0: permanently promiscuous mode enabled [...] bce0: Gigabit link up! [...] bce0: link state changed to UP [...] bce0: Gigabit link up! [...] bce0: Gigabit link up! [...] bce2: link state changed to UP [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] 517.491198 [1139] generic_netmap_attach Emulated adapter for bce0 created (prev was NULL) [...] 517.491237 [1044] generic_netmap_dtor Emulated netmap adapter for bce0 destroyed [...] bce0: permanently promiscuous mode enabled [...] 517.491411 [1139] generic_netmap_attach Emulated adapter for bce0 created (prev was NULL) [...] 517.653986 [ 320] generic_netmap_register Emulated adapter for bce0 activated [...] 518.620132 [1139] generic_netmap_attach Emulated adapter for bce2 created (prev was NULL) [...] 518.620171 [1044] generic_netmap_dtor Emulated netmap adapter for bce2 destroyed [...] 518.620274 [1139] generic_netmap_attach Emulated adapter for bce5 created (prev was NULL) [...] bce2: permanently promiscuous mode enabled [...] 518.620302 [1044] generic_netmap_dtor Emulated netmap adapter for bce5 destroyed [...] 518.620348 [1139] generic_netmap_attach Emulated adapter for bce2 created (prev was NULL) [...] 518.620585 [ 320] generic_netmap_register Emulated adapter for bce2 activated [...] bce5: permanently promiscuous mode enabled [...] 518.622262 [1139] generic_netmap_attach Emulated adapter for bce5 created (prev was NULL) [...] 518.622510 [ 320] generic_netmap_register Emulated adapter for bce5 activated [...] 518.671827 [1139] generic_netmap_attach Emulated adapter for bce4 created (prev was NULL) [...] 518.671862 [1044] generic_netmap_dtor Emulated netmap adapter for bce4 destroyed [...] 518.671962 [1139] generic_netmap_attach Emulated adapter for bce3 created (prev was NULL) [...] bce4: permanently promiscuous mode enabled [...] 518.672004 [1044] generic_netmap_dtor Emulated netmap adapter for bce3 destroyed [...] 518.672051 [1139] generic_netmap_attach Emulated adapter for bce4 created (prev was NULL) [...] 518.672297 [ 320] generic_netmap_register Emulated adapter for bce4 activated [...] 518.673906 [1139] generic_netmap_attach Emulated adapter for bce7 created (prev was NULL) [...] 518.673934 [1044] generic_netmap_dtor Emulated netmap adapter for bce7 destroyed [...] bce3: permanently promiscuous mode enabled [...] 518.673989 [1139] generic_netmap_attach Emulated adapter for bce3 created (prev was NULL) [...] 518.674240 [ 320] generic_netmap_register Emulated adapter for bce3 activated [...] bce7: permanently promiscuous mode enabled [...] 518.675939 [1139] generic_netmap_attach Emulated adapter for bce7 created (prev was NULL) [...] 518.676177 [ 320] generic_netmap_register Emulated adapter for bce7 activated [...] 518.812125 [1139] generic_netmap_attach Emulated adapter for bce6 created (prev was NULL) [...] 518.812163 [1044] generic_netmap_dtor Emulated netmap adapter for bce6 destroyed [...] bce6: permanently promiscuous mode enabled [...] 518.812329 [1139] generic_netmap_attach Emulated adapter for bce6 created (prev was NULL) [...] 518.812602 [ 320] generic_netmap_register Emulated adapter for bce6 activated [...] 763.847652 [1139] generic_netmap_attach Emulated adapter for bce1 created (prev was NULL) [...] 763.847693 [1044] generic_netmap_dtor Emulated netmap adapter for bce1 destroyed [...] bce1: permanently promiscuous mode enabled [...] 763.850997 [1139] generic_netmap_attach Emulated adapter for bce1 created (prev was NULL) [...] 763.851196 [ 320] generic_netmap_register Emulated adapter for bce1 activated