[...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] bridge0: Ethernet address: ... [...] igb0: promiscuous mode enabled [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] em0: link state changed to DOWN [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] tun1: changing name to 'ovpns1' [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] igb0: link state changed to DOWN [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] igb0: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] cannot forward from fe80:XXXX::XXX:XXX:XXX:XXX to fe80:XXXX::XXX:XXX:XXX:XXX nxt 58 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] cannot forward from fe80:XXXX::XXX:XXX:XXX:XXX to fe80:XXXX::XXX:XXX:XXX:XXX nxt 58 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] pflog0: promiscuous mode disabled [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p16-HBSD #0 b531d3958f5(stable/21.1)-dirty: Tue Apr 20 11:00:08 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (3292.62-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16507617280 (15742 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-BPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1646309450 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <HPQOEM SLIC-BPC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe580000-0xfe5fffff,0xfe60c000-0xfe60ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe500000-0xfe57ffff,0xfe608000-0xfe60bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe480000-0xfe4fffff,0xfe604000-0xfe607fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe400000-0xfe47ffff,0xfe600000-0xfe603fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe729000-0xfe729fff irq 17 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xfe700000-0xfe71ffff,0xfe728000-0xfe728fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfe727000-0xfe7273ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xfe720000-0xfe723fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfe726000-0xfe7263ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe725000-0xfe7257ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xd3000-0xd3fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa0 [...] pcm1: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD2500AAKX-603CA0 18.01H18> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WD5000AAKS-00V1A0 05.01D05> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] bridge0: Ethernet address: ... [...] igb0: promiscuous mode enabled [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] em0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb1: link state changed to UP [...] em0: link state changed to UP [...] tun1: changing name to 'ovpns1' [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] igb3: link state changed to DOWN [...] igb3: link state changed to UP [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] pflog0: promiscuous mode disabled [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 5 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p16-HBSD #0 b531d3958f5(stable/21.1)-dirty: Tue Apr 20 11:00:08 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (3292.64-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16507617280 (15742 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-BPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1646317680 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7c0, 0) error 19 [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <HPQOEM SLIC-BPC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe580000-0xfe5fffff,0xfe60c000-0xfe60ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe500000-0xfe57ffff,0xfe608000-0xfe60bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe480000-0xfe4fffff,0xfe604000-0xfe607fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe400000-0xfe47ffff,0xfe600000-0xfe603fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe729000-0xfe729fff irq 17 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xfe700000-0xfe71ffff,0xfe728000-0xfe728fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfe727000-0xfe7273ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xfe720000-0xfe723fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfe726000-0xfe7263ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe725000-0xfe7257ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xd3000-0xd3fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa0 [...] pcm1: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD2500AAKX-603CA0 18.01H18> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WD5000AAKS-00V1A0 05.01D05> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub3 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] uhub3: 6 ports with 6 removable, self powered [...] uhub2: 8 ports with 8 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] bridge0: Ethernet address: ... [...] igb0: promiscuous mode enabled [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] em0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] igb1: link state changed to UP [...] em0: link state changed to UP [...] tun1: changing name to 'ovpns1' [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: XXX is using my IP address XXX.XXX.XXX.XXX on bridge0! [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] cannot forward from fe80:XXXX::XXX:XXX:XXX:XXX to fe80:XXXX::XXX:XXX:XXX:XXX nxt 58 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] cannot forward from fe80:XXXX::XXX:XXX:XXX:XXX to fe80:XXXX::XXX:XXX:XXX:XXX nxt 58 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] pid 25768 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 14764 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 93355 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 1239 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] pid 34608 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped) [...] [HBSD SEGVGUARD] [syslog-ng (34608)] Suspending execution for 600 seconds after 5 crashes. [...] -> pid: 34608 ppid: 25593 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] [HBSD SEGVGUARD] [syslog-ng (25593)] Preventing execution due to repeated segfaults. [...] -> pid: 25593 ppid: 1 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT> [...] pflog0: promiscuous mode disabled [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 6 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p18-HBSD #1 815defa6fd0(stable/21.1)-dirty: Mon Jun 14 09:17:18 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (3292.64-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16507617280 (15742 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-BPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 2 1 3 [...] Timecounter "TSC-low" frequency 1646318300 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7f0, 0) error 19 [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <HPQOEM SLIC-BPC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe580000-0xfe5fffff,0xfe60c000-0xfe60ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe500000-0xfe57ffff,0xfe608000-0xfe60bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe480000-0xfe4fffff,0xfe604000-0xfe607fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe400000-0xfe47ffff,0xfe600000-0xfe603fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe729000-0xfe729fff irq 17 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xfe700000-0xfe71ffff,0xfe728000-0xfe728fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfe727000-0xfe7273ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xfe720000-0xfe723fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfe726000-0xfe7263ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe725000-0xfe7257ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xd3000-0xd3fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa0 [...] pcm1: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD2500AAKX-603CA0 18.01H18> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WD5000AAKS-00V1A0 05.01D05> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 3 ports with 3 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] tun1: changing name to 'ovpns1' [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] bridge0: Ethernet address: ... [...] igb0: promiscuous mode enabled [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] em0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] igb2: link state changed to UP [...] em0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 [...] ugen0.3: <Marvell BG2CD S/N:12345678A> at usbus0 (disconnected) [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] pflog0: promiscuous mode disabled [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 2 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 2474-67F5 The HardenedBSD Project. [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p18-HBSD #1 815defa6fd0(stable/21.1)-dirty: Mon Jun 14 09:17:18 CEST 2021 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(vga): resolution 640x480 [...] HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). [...] CPU: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (3292.63-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16507617280 (15742 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM SLIC-BPC> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 3 1 2 [...] Timecounter "TSC-low" frequency 1646314946 Hz quality 1000 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8128e7f0, 0) error 19 [...] 000.000054 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <HPQOEM SLIC-BPC> on motherboard [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe580000-0xfe5fffff,0xfe60c000-0xfe60ffff irq 19 at device 0.0 on pci1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe500000-0xfe57ffff,0xfe608000-0xfe60bfff irq 18 at device 0.1 on pci1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe480000-0xfe4fffff,0xfe604000-0xfe607fff irq 17 at device 0.2 on pci1 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfe400000-0xfe47ffff,0xfe600000-0xfe603fff irq 16 at device 0.3 on pci1 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe729000-0xfe729fff irq 17 at device 22.3 on pci0 [...] uart2: Using 1 MSI message [...] em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xfe700000-0xfe71ffff,0xfe728000-0xfe728fff irq 20 at device 25.0 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfe727000-0xfe7273ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xfe720000-0xfe723fff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfe726000-0xfe7263ff irq 23 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe725000-0xfe7257ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 [...] device_attach: ahciem0 attach returned 6 [...] acpi_button0: <Power Button> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xd3000-0xd3fff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa0 [...] pcm1: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD2500AAKX-603CA0 18.01H18> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 238475MB (488397168 512 byte sectors) [...] ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 [...] ada1: <WDC WD5000AAKS-00V1A0 05.01D05> ATA8-ACS SATA 2.x device [...] ada1: Serial Number... [...] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada1: Command Queueing enabled [...] ada1: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 3 ports with 3 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] igb0: link state changed to UP [...] igb1: link state changed to UP [...] igb2: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] lo0: link state changed to UP [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] tun1: changing name to 'ovpns1' [...] igb0: link state changed to DOWN [...] igb1: link state changed to DOWN [...] igb2: link state changed to DOWN [...] igb3: link state changed to DOWN [...] bridge0: Ethernet address: ... [...] igb0: promiscuous mode enabled [...] bridge0: link state changed to UP [...] igb1: promiscuous mode enabled [...] igb2: promiscuous mode enabled [...] igb3: promiscuous mode enabled [...] em0: link state changed to DOWN [...] igb0: link state changed to UP [...] igb2: link state changed to UP [...] igb1: link state changed to UP [...] igb3: link state changed to UP [...] em0: link state changed to UP [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to DOWN [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] ovpns1: link state changed to UP [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] pflog0: promiscuous mode disabled [...] pflog0: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: packet with invalid ethernet address length 0 received on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on bridge0