[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: 12th Gen Intel(R) Core(TM) i3-1215U (2496.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906a4 Family=0x6 Model=0x9a Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x984007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc18c410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33032556544 (31502 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: Non-uniform topology [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 4 5 6 2 7 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x33c6c000-0x33c6c01e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x41000000-0x41ffffff,0x50000000-0x5fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x43300000-0x43303fff at device 0.0 on pci1 [...] xhci0: <Intel Alder Lake-P Thunderbolt 4 USB controller> mem 0x43430000-0x4343ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <Intel Alder Lake USB 3.2 controller> mem 0x43420000-0x4342ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x43450000-0x43451fff,0x43456000-0x434560ff,0x43455000-0x434557ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x43100000-0x431fffff,0x43200000-0x43203fff at device 0.0 on pci2 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x42e00000-0x42efffff,0x42f00000-0x42f03fff at device 0.0 on pci3 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x42b00000-0x42bfffff,0x42c00000-0x42c03fff at device 0.0 on pci4 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x42800000-0x428fffff,0x42900000-0x42903fff at device 0.0 on pci5 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igc4: <Intel(R) Ethernet Controller I226-V> mem 0x42500000-0x425fffff,0x42600000-0x42603fff at device 0.0 on pci6 [...] igc4: Using 1024 TX descriptors and 1024 RX descriptors [...] igc4: Using 4 RX queues 4 TX queues [...] igc4: Using MSI-X interrupts with 5 vectors [...] igc4: Ethernet address: ... [...] igc4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igc5: <Intel(R) Ethernet Controller I226-V> mem 0x42200000-0x422fffff,0x42300000-0x42303fff at device 0.0 on pci7 [...] igc5: Using 1024 TX descriptors and 1024 RX descriptors [...] igc5: Using 4 RX queues 4 TX queues [...] igc5: Using MSI-X interrupts with 5 vectors [...] igc5: Ethernet address: ... [...] igc5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-P HDA Controller> mem 0x43448000-0x4344bfff,0x42000000-0x420fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1248005582 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nvd0: <Samsung SSD 970 EVO Plus 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] WARNING: / was not properly dismounted [...] WARNING: /: mount pending error: blocks 8 files 0 [...] uhub1: 5 ports with 5 removable, self powered [...] uhub0: 16 ports with 16 removable, self powered [...] ugen1.2: <Compx 2.4G Receiver> at usbus1 [...] ukbd0 on uhub0 [...] ukbd0: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.18, addr 1> on usbus1 [...] kbd1 at ukbd0 [...] ugen1.3: <Asmedia ASM107x> at usbus1 [...] uhub2 on uhub0 [...] uhub2: <Asmedia ASM107x, class 9/0, rev 2.10/0.01, addr 2> on usbus1 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] ugen1.4: <USB Storage USB Storage> at usbus1 [...] umass0 on uhub0 [...] umass0: <USB Storage USB Storage, class 0/0, rev 2.00/14.04, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:2:0: Attached to scbus2 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1404> Removable Direct Access SPC-4 SCSI device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] igc0: link state changed to UP [...] igc2: link state changed to UP [...] igc4: link state changed to UP [...] ugen1.5: <Asmedia ASM107x> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <Asmedia ASM107x, class 9/0, rev 3.00/0.01, addr 4> on usbus1 [...] ig4iic0: <Intel Alder Lake-P I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus0: <unknown card> at addr 0x2c [...] ig4iic1: <Intel Alder Lake-P I2C Controller-1> at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] ig4iic2: <Intel Alder Lake-P I2C Controller-4> at device 25.0 on pci0 [...] ig4iic2: Using MSI [...] iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2 [...] ig4iic3: <Intel Alder Lake-P I2C Controller-5> at device 25.1 on pci0 [...] ig4iic3: Using MSI [...] iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic3 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x43452000-0x434520ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhub3: 4 ports with 4 removable, self powered [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub0 [...] ums0: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.18, addr 1> on usbus1 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] igc3: link state changed to UP [...] igc5: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igc2: link state changed to DOWN [...] igc3: link state changed to DOWN [...] igc4: link state changed to DOWN [...] igc5: link state changed to DOWN [...] bridge0: Ethernet address: ... [...] igc2: promiscuous mode enabled [...] bridge0: link state changed to UP [...] igc3: promiscuous mode enabled [...] igc4: promiscuous mode enabled [...] igc5: promiscuous mode enabled [...] igc0: link state changed to DOWN [...] igc4: link state changed to UP [...] igc5: link state changed to UP [...] igc2: link state changed to UP [...] igc3: link state changed to UP [...] igc0: link state changed to UP [...] tun1: changing name to 'ovpnc1' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] tun0: link state changed to UP [...] tun0: changing name to 'tailscale0' [...] nvme0: async event occurred (type 0x1, info 0x01, page 0x02) [...] nvme0: temperature above threshold [...] igc2: link state changed to DOWN [...] igc2: link state changed to UP [...] igc2: link state changed to DOWN [...] igc2: link state changed to UP [...] igc5: link state changed to DOWN [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 58, rcvif bridge0, outif igc0 [...] igc5: link state changed to UP [...] igc5: link state changed to DOWN [...] igc5: link state changed to UP [...] coretemp0: critical temperature detected, suggest system shutdown [...] igc5: link state changed to DOWN [...] igc5: link state changed to UP [...] igc5: link state changed to DOWN [...] tailscale0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 13 10 1 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: 12th Gen Intel(R) Core(TM) i3-1215U (2496.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906a4 Family=0x6 Model=0x9a Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x984007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc18c410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33032556544 (31502 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: Non-uniform topology [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 6 7 4 2 5 3 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x33c6c000-0x33c6c01e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x41000000-0x41ffffff,0x50000000-0x5fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x43300000-0x43303fff at device 0.0 on pci1 [...] xhci0: <Intel Alder Lake-P Thunderbolt 4 USB controller> mem 0x43430000-0x4343ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <Intel Alder Lake USB 3.2 controller> mem 0x43420000-0x4342ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x43450000-0x43451fff,0x43456000-0x434560ff,0x43455000-0x434557ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x43100000-0x431fffff,0x43200000-0x43203fff at device 0.0 on pci2 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x42e00000-0x42efffff,0x42f00000-0x42f03fff at device 0.0 on pci3 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x42b00000-0x42bfffff,0x42c00000-0x42c03fff at device 0.0 on pci4 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x42800000-0x428fffff,0x42900000-0x42903fff at device 0.0 on pci5 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igc4: <Intel(R) Ethernet Controller I226-V> mem 0x42500000-0x425fffff,0x42600000-0x42603fff at device 0.0 on pci6 [...] igc4: Using 1024 TX descriptors and 1024 RX descriptors [...] igc4: Using 4 RX queues 4 TX queues [...] igc4: Using MSI-X interrupts with 5 vectors [...] igc4: Ethernet address: ... [...] igc4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igc5: <Intel(R) Ethernet Controller I226-V> mem 0x42200000-0x422fffff,0x42300000-0x42303fff at device 0.0 on pci7 [...] igc5: Using 1024 TX descriptors and 1024 RX descriptors [...] igc5: Using 4 RX queues 4 TX queues [...] igc5: Using MSI-X interrupts with 5 vectors [...] igc5: Ethernet address: ... [...] igc5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-P HDA Controller> mem 0x43448000-0x4344bfff,0x42000000-0x420fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1248001925 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 970 EVO Plus 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] uhub0: 5 ports with 5 removable, self powered [...] uhub1: 16 ports with 16 removable, self powered [...] ugen1.2: <Compx 2.4G Receiver> at usbus1 [...] ukbd0 on uhub1 [...] ukbd0: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.18, addr 1> on usbus1 [...] kbd1 at ukbd0 [...] ugen1.3: <Asmedia ASM107x> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <Asmedia ASM107x, class 9/0, rev 2.10/0.01, addr 2> on usbus1 [...] uhub2: MTT enabled [...] uhub2: 4 ports with 4 removable, self powered [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] ugen1.4: <USB Storage USB Storage> at usbus1 [...] umass0 on uhub1 [...] umass0: <USB Storage USB Storage, class 0/0, rev 2.00/14.04, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:2:0: Attached to scbus2 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1404> Removable Direct Access SPC-4 SCSI device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] ugen1.5: <Asmedia ASM107x> at usbus1 [...] uhub3 on uhub1 [...] uhub3: <Asmedia ASM107x, class 9/0, rev 3.00/0.01, addr 4> on usbus1 [...] uhub3: 4 ports with 4 removable, self powered [...] igc0: link state changed to UP [...] igc2: link state changed to UP [...] igc3: link state changed to UP [...] igc4: link state changed to UP [...] ig4iic0: <Intel Alder Lake-P I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] iicbus0: <unknown card> at addr 0x2c [...] ig4iic1: <Intel Alder Lake-P I2C Controller-1> at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] ig4iic2: <Intel Alder Lake-P I2C Controller-4> at device 25.0 on pci0 [...] ig4iic2: Using MSI [...] iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2 [...] ig4iic3: <Intel Alder Lake-P I2C Controller-5> at device 25.1 on pci0 [...] ig4iic3: Using MSI [...] iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic3 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x43452000-0x434520ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [...] ums0 on uhub1 [...] ums0: <Compx 2.4G Receiver, class 0/0, rev 1.10/6.18, addr 1> on usbus1 [...] ums0: 5 buttons and [XYZT] coordinates ID=1 [...] lo0: link state changed to UP [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igc2: link state changed to DOWN [...] igc3: link state changed to DOWN [...] igc4: link state changed to DOWN [...] bridge0: Ethernet address: ... [...] igc2: promiscuous mode enabled [...] bridge0: link state changed to UP [...] igc3: promiscuous mode enabled [...] igc4: promiscuous mode enabled [...] igc5: promiscuous mode enabled [...] igc0: link state changed to DOWN [...] igc4: link state changed to UP [...] igc2: link state changed to UP [...] igc3: link state changed to UP [...] igc0: link state changed to UP [...] tun1: changing name to 'ovpnc1' [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] tun0: link state changed to UP [...] tun0: changing name to 'tailscale0' [...] igc2: link state changed to DOWN [...] igc2: link state changed to UP [...] igc2: link state changed to DOWN [...] igc2: link state changed to UP [...] coretemp0: critical temperature detected, suggest system shutdown [...] nvme0: async event occurred (type 0x1, info 0x01, page 0x02) [...] nvme0: temperature above threshold [...] coretemp0: critical temperature detected, suggest system shutdown [...] cannot forward src fe80:XXXX::XXX:XXX:XXX:XXX, dst XXX:XXX:XXX:XXX::XXX, nxt 58, rcvif bridge0, outif igc0 [...] igc4: link state changed to DOWN [...] igc4: link state changed to UP [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on igc0 [...] coretemp0: critical temperature detected, suggest system shutdown [...] tailscale0: link state changed to DOWN [...] tun0: link state changed to UP [...] tun0: changing name to 'tailscale0' [...] tailscale0: link state changed to DOWN [...] pid 25098 (syslog-ng), jid 0, uid 0: exited on signal 6 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 done [...] All buffers synced. [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p11 stable/24.1-n255023-99a14409566 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: 12th Gen Intel(R) Core(TM) i3-1215U (2496.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x906a4 Family=0x6 Model=0x9a Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x984007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc18c410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33032556544 (31502 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: Non-uniform topology [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 6 7 5 4 3 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x33c6c000-0x33c6c01e [...] smbios0: Version: 3.5, BCD Revision: 3.5 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x41000000-0x41ffffff,0x50000000-0x5fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x43300000-0x43303fff at device 0.0 on pci1 [...] xhci0: <Intel Alder Lake-P Thunderbolt 4 USB controller> mem 0x43430000-0x4343ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <Intel Alder Lake USB 3.2 controller> mem 0x43420000-0x4342ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x43450000-0x43451fff,0x43456000-0x434560ff,0x43455000-0x434557ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pci0: <serial bus> at device 25.1 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x43100000-0x431fffff,0x43200000-0x43203fff at device 0.0 on pci2 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x42e00000-0x42efffff,0x42f00000-0x42f03fff at device 0.0 on pci3 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x42b00000-0x42bfffff,0x42c00000-0x42c03fff at device 0.0 on pci4 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x42800000-0x428fffff,0x42900000-0x42903fff at device 0.0 on pci5 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] igc4: <Intel(R) Ethernet Controller I226-V> mem 0x42500000-0x425fffff,0x42600000-0x42603fff at device 0.0 on pci6 [...] igc4: Using 1024 TX descriptors and 1024 RX descriptors [...] igc4: Using 4 RX queues 4 TX queues [...] igc4: Using MSI-X interrupts with 5 vectors [...] igc4: Ethernet address: ... [...] igc4: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <ACPI PCI-PCI bridge> at device 29.1 on pci0 [...] pci7: <ACPI PCI bus> on pcib7 [...] igc5: <Intel(R) Ethernet Controller I226-V> mem 0x42200000-0x422fffff,0x42300000-0x42303fff at device 0.0 on pci7 [...] igc5: Using 1024 TX descriptors and 1024 RX descriptors [...] igc5: Using 4 RX queues 4 TX queues [...] igc5: Using MSI-X interrupts with 5 vectors [...] igc5: Ethernet address: ... [...] igc5: netmap queues/slots: TX 4/1024, RX 4/1024 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-P HDA Controller> mem 0x43448000-0x4344bfff,0x42000000-0x420fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1248005483 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] nvd0: <Samsung SSD 970 EVO Plus 1TB> NVMe namespace [...] nvd0: 953869MB (1953525168 512 byte sectors) [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...