[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248059-267a40127d5 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.43-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33242271744 (31702 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 4 5 3 6 2 7 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0c00000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579LM> port 0x3080-0x309f mem 0xe2100000-0xe211ffff,0xe2180000-0xe2180fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xe2170000-0xe21703ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xe2160000-0xe2163fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) PRO/1000 82576> port 0x2020-0x203f mem 0xe2020000-0xe203ffff,0xe1c00000-0xe1ffffff,0xe2050000-0xe2053fff irq 18 at device 0.0 on pci2 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0x2000-0x201f mem 0xe2000000-0xe201ffff,0xe1400000-0xe17fffff,0xe2040000-0xe2043fff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xe2150000-0xe21503ff irq 17 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0x30d0-0x30d7,0x30c0-0x30c3,0x30b0-0x30b7,0x30a0-0x30a3,0x3060-0x307f mem 0xe2140000-0xe21407ff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff,0xd1800-0xd27ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696148290 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 27,33 and 25 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... [...] Root mount waiting for: usbus0 usbus1 CAM [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] Root mount waiting for: usbus0 usbus1 CAM [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 CAM [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus0 usbus1 CAM [...] ugen1.3: <Logitech USB Receiver> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] ugen1.4: <Microsoft Microsoft Nano Transceiver v2.0> at usbus1 [...] ukbd1 on uhub3 [...] ukbd1: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/9.44, addr 4> on usbus1 [...] kbd3 at ukbd1 [...] Root mount waiting for: usbus0 CAM [...] ugen0.3: <Generic Mass Storage Device> at usbus0 [...] umass0 on uhub2 [...] umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus0 [...] umass0: SCSI over Bulk-Only; quirks = 0xc100 [...] umass0:2:0: Attached to scbus2 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDA120G Z22000RL> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 01', SATA Slot: scbus0 target 0 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <TDK LoR TF10 0.00> Removable Direct Access SCSI-2 device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 15031MB (30785504 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM: da0: the secondary GPT table is corrupt or invalid. [...] GEOM: da0: using the primary only -- recovery suggested. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] mountroot: waiting for device /dev/ufs/OPNsense_Install... [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] igb0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff80004013000), ignoring. [...] ichsmb0: <Intel Cougar Point SMBus controller> port 0x3040-0x305f mem 0xe2130000-0xe21300ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub3 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 3> on usbus1 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] ums1 on uhub3 [...] ums1: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/9.44, addr 4> on usbus1 [...] ums1: 5 buttons and [XYZT] coordinates ID=26 [...] ums1: 0 buttons and [T] coordinates ID=0 [...] uhid0 on uhub3 [...] uhid0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/9.44, addr 4> on usbus1 [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] lo0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] All buffers synced. [...] Uptime: 4m9s [...] ukbd0: detached [...] ums0: detached [...] ukbd1: detached [...] ums1: detached [...] uhid0: detached [...] uhub3: detached [...] uhub0: detached [...] igb0: link state changed to DOWN [...] umass0: detached [...] uhub2: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248059-267a40127d5 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.38-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33242271744 (31702 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 4 5 3 6 7 2 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0c00000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579LM> port 0x3080-0x309f mem 0xe2100000-0xe211ffff,0xe2180000-0xe2180fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xe2170000-0xe21703ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xe2160000-0xe2163fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) PRO/1000 82576> port 0x2020-0x203f mem 0xe2020000-0xe203ffff,0xe1c00000-0xe1ffffff,0xe2050000-0xe2053fff irq 18 at device 0.0 on pci2 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0x2000-0x201f mem 0xe2000000-0xe201ffff,0xe1400000-0xe17fffff,0xe2040000-0xe2043fff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xe2150000-0xe21503ff irq 17 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0x30d0-0x30d7,0x30c0-0x30c3,0x30b0-0x30b7,0x30a0-0x30a3,0x3060-0x307f mem 0xe2140000-0xe21407ff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff,0xd1800-0xd27ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696147825 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 27,33 and 25 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus0 usbus1 CAM [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDA120G Z22000RL> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 01', SATA Slot: scbus0 target 0 [...] Root mount waiting for:uhub1: 2 ports with 2 removable, self powered [...] usbus0 usbus1 [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <Logitech USB Receiver> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Microsoft Microsoft Nano Transceiver v2.0> at usbus1 [...] ukbd1 on uhub3 [...] ukbd1: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/9.44, addr 4> on usbus1 [...] kbd3 at ukbd1 [...] mountroot: waiting for device /dev/gpt/rootfs... [...] igb0: link state changed to UP [...] debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff80004407000), ignoring. [...] ichsmb0: <Intel Cougar Point SMBus controller> port 0x3040-0x305f mem 0xe2130000-0xe21300ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub3 [...] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 3> on usbus1 [...] ums0: 18 buttons and [XYZT] coordinates ID=2 [...] ums1 on uhub3 [...] ums1: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/9.44, addr 4> on usbus1 [...] ums1: 5 buttons and [XYZT] coordinates ID=26 [...] ums1: 0 buttons and [T] coordinates ID=0 [...] uhid0 on uhub3 [...] uhid0: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/9.44, addr 4> on usbus1 [...] lo0: link state changed to UP [...] igb0: link state changed to DOWN [...] igb0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igb1: link state changed to UP [...] igb1: link state changed to DOWN [...] igb1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 227 fsync: giving up on dirty (error = 35) 0xfffff80004158d58: type VCHR [...] usecount 1, writecount 0, refcount 677 seqc users 0 rdev 0xfffff80004175000 [...] hold count flags () [...] flags () [...] v_object 0xfffff80004144e70 ref 0 pages 9554 cleanbuf 674 dirtybuf 1 [...] lock type mntfs: EXCL by thread 0xfffffe01071b4ac0 (pid 16, syncer, tid 100137) [...] 225 1 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done [...] All buffers synced. [...] Uptime: 10m29s [...] ukbd0: detached [...] ums0: detached [...] ukbd1: detached [...] ums1: detached [...] uhid0: detached [...] uhub3: detached [...] uhub0: detached [...] igb0: link state changed to DOWN [...] uhub2: detached [...] uhub1: detached [...] ---<<BOOT>>--- [...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.0-STABLE stable/22.1-n248075-469123a60d1 SMP amd64 [...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.44-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0xc000000<IBPB,STIBP> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33242271744 (31702 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL CBX3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 6 5 7 2 3 4 [...] wlan: mac acl policy registered [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL CBX3 > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0c00000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579LM> port 0x3080-0x309f mem 0xe2100000-0xe211ffff,0xe2180000-0xe2180fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xe2170000-0xe21703ff irq 16 at device 26.0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] hdac0: <Intel Cougar Point HDA Controller> mem 0xe2160000-0xe2163fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igb0: <Intel(R) PRO/1000 82576> port 0x2020-0x203f mem 0xe2020000-0xe203ffff,0xe1c00000-0xe1ffffff,0xe2050000-0xe2053fff irq 18 at device 0.0 on pci2 [...] igb0: EEPROM V1.2-1 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 82576> port 0x2000-0x201f mem 0xe2000000-0xe201ffff,0xe1400000-0xe17fffff,0xe2040000-0xe2043fff irq 19 at device 0.1 on pci2 [...] igb1: EEPROM V1.2-1 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xe2150000-0xe21503ff irq 17 at device 29.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel Cougar Point AHCI SATA controller> port 0x30d0-0x30d7,0x30c0-0x30c3,0x30b0-0x30b7,0x30a0-0x30a3,0x3060-0x307f mem 0xe2140000-0xe21407ff irq 18 at device 31.2 on pci0 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff,0xd1800-0xd27ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1696148548 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 [...] pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 27,33 and 25 on hdaa0 [...] hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 [...] hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 [...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]... [...] Root mount waiting for: usbus0 usbus1 CAM [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <SanDisk SDSSDA120G Z22000RL> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 01', SATA Slot: scbus0 target 0 [...] Root mount waiting for:uhub1: 2 ports with 2 removable, self powered [...] usbus0 usbus1 [...] uhub0: 2 ports with 2 removable, self powered [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 on uhub1 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 on uhub0 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus0 usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen1.3: <Logitech USB Receiver> at usbus1 [...] ukbd0 on uhub3 [...] ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 3> on usbus1 [...] kbd2 at ukbd0 [...] Root mount waiting for: usbus1 [...] ugen1.4: <Microsoft Microsoft Nano Transceiver v2.0> at usbus1 [...] ukbd1 on uhub3 [...] ukbd1: <Microsoft Microsoft Nano Transceiver v2.0, class 0/0, rev 2.00/9.44, addr 4> on usbus1 [...] kbd3 at ukbd1 [...] mountroot: waiting for device /dev/gpt/rootfs...