Probe #58e0b159cd of MSI 970 GAMING Desktop Computer (MS-7693)
Log: dmesg
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.2-RELEASE-p10 stable/24.1-n254984-f7b006edfa8 SMP amd64
[...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
[...] VT(efifb): resolution 1024x768
[...] CPU: AMD FX-8320E Eight-Core Processor (3200.17-MHz K8-class CPU)
[...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
[...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
[...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
[...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
[...] Structured Extended Features=0x8<BMI1>
[...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33316896768 (31773 MB)
[...] Event timer "LAPIC" quality 100
[...] ACPI APIC Table: <ALASKA A M I>
[...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
[...] FreeBSD/SMP: 1 package(s) x 8 core(s)
[...] random: unblocking device.
[...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
[...] ioapic0 <Version 2.1> irqs 0-23
[...] ioapic1 <Version 2.1> irqs 24-55
[...] Launching APs: 1 5 2 3 4 6 7
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de
[...] smbios0: Version: 2.8, BCD Revision: 2.7
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I>
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 350
[...] Event timer "HPET1" frequency 14318180 Hz quality 350
[...] Event timer "HPET2" frequency 14318180 Hz quality 350
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfc000000-0xfcffffff,0xf0000000-0xf7ffffff,0xf8000000-0xf9ffffff irq 24 at device 0.0 on pci1
[...] vgapci0: Boot video device
[...] hdac0: <NVIDIA GT108 HDA Controller> mem 0xfd080000-0xfd083fff irq 25 at device 0.1 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 3.0 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] igb0: <Intel(R) PRO/1000 82575EB (Copper)> port 0xd020-0xd03f mem 0xfdf20000-0xfdf3ffff,0xfde00000-0xfdefffff,0xfdf44000-0xfdf47fff irq 28 at device 0.0 on pci2
[...] igb0: EEPROM V1.13-1
[...] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb0: Using 4 RX queues 4 TX queues
[...] igb0: Using MSI-X interrupts with 5 vectors
[...] igb0: Ethernet address: ...
[...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024
[...] igb1: <Intel(R) PRO/1000 82575EB (Copper)> port 0xd000-0xd01f mem 0xfdf00000-0xfdf1ffff,0xfdc00000-0xfdcfffff,0xfdf40000-0xfdf43fff irq 29 at device 0.1 on pci2
[...] igb1: EEPROM V1.13-1
[...] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb1: Using 4 RX queues 4 TX queues
[...] igb1: Using MSI-X interrupts with 5 vectors
[...] igb1: Ethernet address: ...
[...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe300000-0xfe300fff irq 44 at device 0.0 on pci3
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pcib4: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] igb2: <Intel(R) PRO/1000 82575EB (Copper)> port 0xc020-0xc03f mem 0xfda20000-0xfda3ffff,0xfd900000-0xfd9fffff,0xfda44000-0xfda47fff irq 46 at device 0.0 on pci4
[...] igb2: EEPROM V1.13-1
[...] igb2: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb2: Using 4 RX queues 4 TX queues
[...] igb2: Using MSI-X interrupts with 5 vectors
[...] igb2: Ethernet address: ...
[...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024
[...] igb3: <Intel(R) PRO/1000 82575EB (Copper)> port 0xc000-0xc01f mem 0xfda00000-0xfda1ffff,0xfd700000-0xfd7fffff,0xfda40000-0xfda43fff irq 47 at device 0.1 on pci4
[...] igb3: EEPROM V1.13-1
[...] igb3: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb3: Using 4 RX queues 4 TX queues
[...] igb3: Using MSI-X interrupts with 5 vectors
[...] igb3: Ethernet address: ...
[...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024
[...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0
[...] pci5: <ACPI PCI bus> on pcib5
[...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe200000-0xfe200fff irq 51 at device 0.0 on pci5
[...] xhci1: 32 bytes context size, 64-bit DMA
[...] usbus1 on xhci1
[...] usbus1: 5.0Gbps Super Speed USB v3.0
[...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe40b000-0xfe40b3ff irq 19 at device 17.0 on pci0
[...] ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
[...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe40a000-0xfe40afff irq 18 at device 18.0 on pci0
[...] usbus2 on ohci0
[...] usbus2: 12Mbps Full Speed USB v1.0
[...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe409000-0xfe4090ff irq 17 at device 18.2 on pci0
[...] usbus3: EHCI version 1.0
[...] usbus3 on ehci0
[...] usbus3: 480Mbps High Speed USB v2.0
[...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe408000-0xfe408fff irq 18 at device 19.0 on pci0
[...] usbus4 on ohci1
[...] usbus4: 12Mbps Full Speed USB v1.0
[...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe407000-0xfe4070ff irq 17 at device 19.2 on pci0
[...] usbus5: EHCI version 1.0
[...] usbus5 on ehci1
[...] usbus5: 480Mbps High Speed USB v2.0
[...] hdac1: <ATI SB600 HDA Controller> mem 0xfe400000-0xfe403fff irq 16 at device 20.2 on pci0
[...] isab0: <PCI-ISA bridge> at device 20.3 on pci0
[...] isa0: <ISA bus> on isab0
[...] pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
[...] pci6: <ACPI PCI bus> on pcib6
[...] re0: <Realtek PCI GbE Family Controller> port 0xb100-0xb1ff mem 0xfe141000-0xfe1410ff irq 20 at device 5.0 on pci6
[...] re0: Using I/O Ports
[...] re0: Using line-based interrupt
[...] re0: version:1.99.04
[...] re0: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re0: Ethernet address: ...
[...] re1: <Realtek PCI GbE Family Controller> port 0xb000-0xb0ff mem 0xfe140000-0xfe1400ff irq 21 at device 6.0 on pci6
[...] re1: Using I/O Ports
[...] re1: Using line-based interrupt
[...] re1: version:1.99.04
[...] re1: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re1: Ethernet address: ...
[...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe406000-0xfe406fff irq 18 at device 20.5 on pci0
[...] usbus6 on ohci2
[...] usbus6: 12Mbps Full Speed USB v1.0
[...] pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0
[...] pci7: <ACPI PCI bus> on pcib7
[...] alc0: <Killer E2200 Gigabit Ethernet> port 0xa000-0xa07f mem 0xfe000000-0xfe03ffff irq 16 at device 0.0 on pci7
[...] alc0: 11776 Tx FIFO, 12032 Rx FIFO
[...] alc0: Using 1 MSIX message(s).
[...] miibus0: <MII bus> on alc0
[...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
[...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
[...] alc0: Using defaults for TSO: 65518/35/2048
[...] alc0: Ethernet address: ...
[...] pcib8: <ACPI PCI-PCI bridge> at device 21.1 on pci0
[...] pci8: <ACPI PCI bus> on pcib8
[...] igb4: <Intel(R) PRO/1000 82575EB (Copper)> port 0x9020-0x903f mem 0xfd520000-0xfd53ffff,0xfd400000-0xfd4fffff,0xfd544000-0xfd547fff irq 17 at device 0.0 on pci8
[...] igb4: EEPROM V1.13-1
[...] igb4: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb4: Using 4 RX queues 4 TX queues
[...] igb4: Using MSI-X interrupts with 5 vectors
[...] igb4: Ethernet address: ...
[...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024
[...] igb5: <Intel(R) PRO/1000 82575EB (Copper)> port 0x9000-0x901f mem 0xfd500000-0xfd51ffff,0xfd200000-0xfd2fffff,0xfd540000-0xfd543fff irq 18 at device 0.1 on pci8
[...] igb5: EEPROM V1.13-1
[...] igb5: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb5: Using 4 RX queues 4 TX queues
[...] igb5: Using MSI-X interrupts with 5 vectors
[...] igb5: Ethernet address: ...
[...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024
[...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe405000-0xfe405fff irq 18 at device 22.0 on pci0
[...] usbus7 on ohci3
[...] usbus7: 12Mbps Full Speed USB v1.0
[...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe404000-0xfe4040ff irq 17 at device 22.2 on pci0
[...] usbus8: EHCI version 1.0
[...] usbus8 on ehci2
[...] usbus8: 480Mbps High Speed USB v2.0
[...] acpi_button0: <Power Button> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0
[...] Timecounter "TSC-low" frequency 1600012319 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <NVIDIA GT440 HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa0
[...] hdacc1: <NVIDIA GT440 HDA CODEC> at cad 1 on hdac0
[...] hdaa1: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc1
[...] pcm1: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa1
[...] hdacc2: <NVIDIA GT440 HDA CODEC> at cad 2 on hdac0
[...] hdaa2: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc2
[...] pcm2: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa2
[...] hdacc3: <NVIDIA GT440 HDA CODEC> at cad 3 on hdac0
[...] hdaa3: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc3
[...] pcm3: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa3
[...] hdacc4: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1
[...] hdaa4: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc4
[...] pcm4: <Realtek ALC1150 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4
[...] pcm5: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa4
[...] pcm6: <Realtek ALC1150 (Internal Digital)> at nid 17 on hdaa4
[...] pcm7: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa4
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] ugen5.1: <ATI EHCI root HUB> at usbus5
[...] ugen6.1: <ATI OHCI root HUB> at usbus6
[...] ugen1.1: <(0x1106) XHCI root HUB> at usbus1
[...] uhub0 on usbus5
[...] uhub1 on usbus6
[...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
[...] ugen8.1: <ATI EHCI root HUB> at usbus8
[...] ugen4.1: <ATI OHCI root HUB> at usbus4
[...] ugen7.1: <ATI OHCI root HUB> at usbus7
[...] uhub2 on usbus1
[...] uhub3 on usbus7
[...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
[...] ugen0.1: <(0x1106) XHCI root HUB> at usbus0
[...] uhub2: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
[...] uhub4 on usbus0
[...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
[...] ugen2.1: <ATI OHCI root HUB> at usbus2
[...] uhub4: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] uhub5 on usbus2
[...] uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
[...] ugen3.1: <ATI EHCI root HUB> at usbus3
[...] uhub6 on usbus4
[...] uhub7 on usbus8
[...] uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
[...] uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
[...] uhub8 on usbus3
[...] uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <Crucial CT275MX300SSD1 M0CR031> ACS-3 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 262321MB (537234768 512 byte sectors)
[...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
[...] cd0: <HL-DT-ST DVDRAM GH24NSB0 LN00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
[...] cd0: 0MB (1 0 byte sectors)
[...] uhub1: 2 ports with 2 removable, self powered
[...] uhub3: 4 ports with 4 removable, self powered
[...] uhub6: 5 ports with 5 removable, self powered
[...] uhub5: 5 ports with 5 removable, self powered
[...] uhub4: 5 ports with 4 removable, self powered
[...] uhub2: 5 ports with 4 removable, self powered
[...] ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
[...] uhub9 on uhub4
[...] uhub9: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0
[...] ugen1.2: <vendor 0x2109 USB2.0 Hub> at usbus1
[...] uhub10 on uhub2
[...] uhub10: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus1
[...] Root mount waiting for: usbus0 usbus1 usbus3 usbus5 usbus8
[...] uhub10: 4 ports with 4 removable, self powered
[...] uhub9: 4 ports with 4 removable, self powered
[...] uhub7: 4 ports with 4 removable, self powered
[...] uhub8: 5 ports with 5 removable, self powered
[...] uhub0: 5 ports with 5 removable, self powered
[...] ugen2.2: <dakai PS/2+USB Keyboard> at usbus2
[...] ukbd0 on uhub5
[...] ukbd0: <dakai PS/2+USB Keyboard, class 0/0, rev 1.10/1b.80, addr 2> on usbus2
[...] kbd2 at ukbd0
[...] ukbd1 on uhub5
[...] ukbd1: <dakai PS/2+USB Keyboard, class 0/0, rev 1.10/1b.80, addr 2> on usbus2
[...] kbd3 at ukbd1
[...] ugen2.3: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)> at usbus2
[...] igb0: link state changed to UP
[...] igb1: link state changed to UP
[...] igb2: link state changed to UP
[...] igb3: link state changed to UP
[...] igb4: link state changed to UP
[...] intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
[...] smbus0: <System Management Bus> on intsmb0
[...] acpi_wmi0: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi0: cannot find EC device
[...] acpi_wmi1: <ACPI-WMI mapping> on acpi0
[...] acpi_wmi1: cannot find EC device
[...] ums0 on uhub5
[...] ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 3> on usbus2
[...] ums0: 3 buttons and [XYZ] coordinates ID=0
[...] lo0: link state changed to UP
[...] pflog0: permanently promiscuous mode enabled
[...] igb0: link state changed to DOWN
[...] igb1: link state changed to DOWN
[...] igb2: link state changed to DOWN
[...] igb3: link state changed to DOWN
[...] igb4: link state changed to DOWN
[...] [fib_algo] inet.0 (bsearch4#16) rebuild_fd_flm: switching algo to radix4_lockless
[...] re0: link state changed to UP
[...] re1: link state changed to UP
[...] alc0: link state changed to DOWN
[...] igb1: link state changed to UP
[...] igb3: link state changed to UP
[...] igb0: link state changed to UP
[...] igb2: link state changed to UP
[...] igb4: link state changed to UP
[...] alc0: link state changed to UP
[...] 495.334115 [1171] generic_netmap_attach Emulated adapter for igb2 created (prev was igb2)
[...] 495.334145 [1068] generic_netmap_dtor Native netmap adapter for igb2 restored
[...] 495.334161 [1076] generic_netmap_dtor Emulated netmap adapter for igb2 destroyed
[...] 495.334274 [1171] generic_netmap_attach Emulated adapter for igb2 created (prev was igb2)
[...] 496.256668 [ 319] generic_netmap_register Emulated adapter for igb2 activated
[...] 496.256854 [1171] generic_netmap_attach Emulated adapter for igb0 created (prev was igb0)
[...] 496.256879 [1068] generic_netmap_dtor Native netmap adapter for igb0 restored
[...] 496.256891 [1076] generic_netmap_dtor Emulated netmap adapter for igb0 destroyed
[...] 496.256910 [1171] generic_netmap_attach Emulated adapter for igb1 created (prev was igb1)
[...] 496.256947 [1068] generic_netmap_dtor Native netmap adapter for igb1 restored
[...] 496.256975 [1076] generic_netmap_dtor Emulated netmap adapter for igb1 destroyed
[...] 496.257018 [1171] generic_netmap_attach Emulated adapter for igb5 created (prev was igb5)
[...] 496.257053 [1068] generic_netmap_dtor Native netmap adapter for igb5 restored
[...] 496.257072 [1076] generic_netmap_dtor Emulated netmap adapter for igb5 destroyed
[...] 496.257174 [1171] generic_netmap_attach Emulated adapter for igb0 created (prev was igb0)
[...] 496.257352 [ 319] generic_netmap_register Emulated adapter for igb0 activated
[...] 496.257510 [1171] generic_netmap_attach Emulated adapter for igb1 created (prev was igb1)
[...] 496.257685 [ 319] generic_netmap_register Emulated adapter for igb1 activated
[...] 496.257887 [1171] generic_netmap_attach Emulated adapter for igb5 created (prev was igb5)
[...] 496.258046 [ 319] generic_netmap_register Emulated adapter for igb5 activated
[...] 496.264574 [1171] generic_netmap_attach Emulated adapter for re0 created (prev was NULL)
[...] 496.264603 [1076] generic_netmap_dtor Emulated netmap adapter for re0 destroyed
[...] 496.264755 [1171] generic_netmap_attach Emulated adapter for re0 created (prev was NULL)
[...] 496.264918 [ 319] generic_netmap_register Emulated adapter for re0 activated
[...] 496.273814 [1171] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 496.273842 [1076] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] 496.273975 [1171] generic_netmap_attach Emulated adapter for re1 created (prev was NULL)
[...] 496.323319 [ 319] generic_netmap_register Emulated adapter for re1 activated
[...] 496.323514 [1171] generic_netmap_attach Emulated adapter for igb3 created (prev was igb3)
[...] 496.323541 [1068] generic_netmap_dtor Native netmap adapter for igb3 restored
[...] 496.323556 [1076] generic_netmap_dtor Emulated netmap adapter for igb3 destroyed
[...] 496.323738 [1171] generic_netmap_attach Emulated adapter for igb4 created (prev was igb4)
[...] 496.323758 [1068] generic_netmap_dtor Native netmap adapter for igb4 restored
[...] 496.323775 [1076] generic_netmap_dtor Emulated netmap adapter for igb4 destroyed
[...] 496.323888 [1171] generic_netmap_attach Emulated adapter for igb3 created (prev was igb3)
[...] 496.324067 [ 319] generic_netmap_register Emulated adapter for igb3 activated
[...] 496.324261 [1171] generic_netmap_attach Emulated adapter for igb4 created (prev was igb4)
[...] 496.324434 [ 319] generic_netmap_register Emulated adapter for igb4 activated
[...] 498.704758 [1171] generic_netmap_attach Emulated adapter for alc0 created (prev was NULL)
[...] 498.704789 [1076] generic_netmap_dtor Emulated netmap adapter for alc0 destroyed
[...] 498.704823 [1171] generic_netmap_attach Emulated adapter for alc0 created (prev was NULL)
[...] 498.704842 [1076] generic_netmap_dtor Emulated netmap adapter for alc0 destroyed
[...] 498.704870 [1171] generic_netmap_attach Emulated adapter for alc0 created (prev was NULL)
[...] 498.704888 [1076] generic_netmap_dtor Emulated netmap adapter for alc0 destroyed
[...] alc0: permanently promiscuous mode enabled
[...] 498.708333 [1171] generic_netmap_attach Emulated adapter for alc0 created (prev was NULL)
[...] 498.708440 [ 319] generic_netmap_register Emulated adapter for alc0 activated
[...] re1: link state changed to DOWN
[...] re1: link state changed to UP
[...] igb0: promiscuous mode enabled
[...] re0: promiscuous mode enabled
[...] igb1: promiscuous mode enabled
[...] re1: promiscuous mode enabled
[...] igb2: promiscuous mode enabled
[...] igb3: promiscuous mode enabled
[...] igb4: promiscuous mode enabled
[...] igb0: promiscuous mode disabled
[...] re0: promiscuous mode disabled
[...] igb1: promiscuous mode disabled
[...] re1: promiscuous mode disabled
[...] igb2: promiscuous mode disabled
[...] igb3: promiscuous mode disabled
[...] igb4: promiscuous mode disabled
[...] igb0: promiscuous mode enabled
[...] re0: promiscuous mode enabled
[...] igb1: promiscuous mode enabled
[...] re1: promiscuous mode enabled
[...] igb2: promiscuous mode enabled
[...] igb3: promiscuous mode enabled
[...] igb4: promiscuous mode enabled
[...] igb0: promiscuous mode disabled
[...] re0: promiscuous mode disabled
[...] igb1: promiscuous mode disabled
[...] re1: promiscuous mode disabled
[...] igb2: promiscuous mode disabled
[...] igb3: promiscuous mode disabled
[...] igb4: promiscuous mode disabled
[...] igb0: promiscuous mode enabled
[...] re0: promiscuous mode enabled
[...] igb1: promiscuous mode enabled
[...] re1: promiscuous mode enabled
[...] igb2: promiscuous mode enabled
[...] igb3: promiscuous mode enabled
[...] igb4: promiscuous mode enabled
[...] igb0: promiscuous mode disabled
[...] re0: promiscuous mode disabled
[...] igb1: promiscuous mode disabled
[...] re1: promiscuous mode disabled
[...] igb2: promiscuous mode disabled
[...] igb3: promiscuous mode disabled
[...] igb4: promiscuous mode disabled
[...] igb0: promiscuous mode enabled
[...] re0: promiscuous mode enabled
[...] igb1: promiscuous mode enabled
[...] re1: promiscuous mode enabled
[...] igb2: promiscuous mode enabled
[...] igb3: promiscuous mode enabled
[...] igb4: promiscuous mode enabled
[...] igb0: promiscuous mode disabled
[...] re0: promiscuous mode disabled
[...] igb1: promiscuous mode disabled
[...] re1: promiscuous mode disabled
[...] igb2: promiscuous mode disabled
[...] igb3: promiscuous mode disabled
[...] igb4: promiscuous mode disabled
[...] igb0: promiscuous mode enabled
[...] re0: promiscuous mode enabled
[...] igb1: promiscuous mode enabled
[...] re1: promiscuous mode enabled
[...] igb2: promiscuous mode enabled
[...] igb3: promiscuous mode enabled
[...] igb4: promiscuous mode enabled
[...] igb0: promiscuous mode disabled
[...] re0: promiscuous mode disabled
[...] igb1: promiscuous mode disabled
[...] re1: promiscuous mode disabled
[...] igb2: promiscuous mode disabled
[...] igb3: promiscuous mode disabled
[...] igb4: promiscuous mode disabled
[...] igb0: promiscuous mode enabled
[...] re0: promiscuous mode enabled
[...] igb1: promiscuous mode enabled
[...] re1: promiscuous mode enabled
[...] igb2: promiscuous mode enabled
[...] igb3: promiscuous mode enabled
[...] igb4: promiscuous mode enabled
[...] igb0: promiscuous mode disabled
[...] re0: promiscuous mode disabled
[...] igb1: promiscuous mode disabled
[...] re1: promiscuous mode disabled
[...] igb2: promiscuous mode disabled
[...] igb3: promiscuous mode disabled
[...] igb4: promiscuous mode disabled
[...] 422.995626 [ 294] generic_netmap_unregister Emulated adapter for alc0 deactivated
[...] 422.995725 [1076] generic_netmap_dtor Emulated netmap adapter for alc0 destroyed
[...] 423.223710 [ 294] generic_netmap_unregister Emulated adapter for igb1 deactivated
[...] 423.223790 [1068] generic_netmap_dtor Native netmap adapter for igb1 restored
[...] 423.223803 [1076] generic_netmap_dtor Emulated netmap adapter for igb1 destroyed
[...] 423.343047 [ 294] generic_netmap_unregister Emulated adapter for re0 deactivated
[...] 423.343120 [1076] generic_netmap_dtor Emulated netmap adapter for re0 destroyed
[...] 423.390942 [ 294] generic_netmap_unregister Emulated adapter for igb2 deactivated
[...] 423.391019 [1068] generic_netmap_dtor Native netmap adapter for igb2 restored
[...] 423.391031 [1076] generic_netmap_dtor Emulated netmap adapter for igb2 destroyed
[...] 423.407061 [ 444] generic_mbuf_dtor Error: no netmap adapter on device 0xfffff80001d21000
[...] 423.528421 [ 294] generic_netmap_unregister Emulated adapter for igb4 deactivated
[...] 423.528634 [1068] generic_netmap_dtor Native netmap adapter for igb4 restored
[...] 423.528647 [1076] generic_netmap_dtor Emulated netmap adapter for igb4 destroyed
[...] 423.582440 [ 294] generic_netmap_unregister Emulated adapter for igb3 deactivated
[...] 423.582529 [1068] generic_netmap_dtor Native netmap adapter for igb3 restored
[...] 423.582542 [1076] generic_netmap_dtor Emulated netmap adapter for igb3 destroyed
[...] 424.015186 [ 294] generic_netmap_unregister Emulated adapter for igb5 deactivated
[...] 424.015274 [1068] generic_netmap_dtor Native netmap adapter for igb5 restored
[...] 424.015286 [1076] generic_netmap_dtor Emulated netmap adapter for igb5 destroyed
[...] 424.025498 [ 294] generic_netmap_unregister Emulated adapter for igb0 deactivated
[...] 424.025594 [1068] generic_netmap_dtor Native netmap adapter for igb0 restored
[...] 424.025607 [1076] generic_netmap_dtor Emulated netmap adapter for igb0 destroyed
[...] 424.101409 [ 294] generic_netmap_unregister Emulated adapter for re1 deactivated
[...] 424.104152 [1076] generic_netmap_dtor Emulated netmap adapter for re1 destroyed
[...] 426.177362 [ 444] generic_mbuf_dtor Error: no netmap adapter on device 0xfffff8000201d000
[...] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[...] Waiting (max 60 seconds) for system process `syncer' to stop...
[...] Syncing disks, vnodes remaining... 5 1 1 0 0 0 done
[...] All buffers synced.
[...] ---<<BOOT>>---
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.2-RELEASE-p10 stable/24.1-n254984-f7b006edfa8 SMP amd64
[...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
[...] VT(efifb): resolution 1024x768
[...] CPU: AMD FX-8320E Eight-Core Processor (3200.15-MHz K8-class CPU)
[...] Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
[...] Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
[...] Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
[...] AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
[...] Structured Extended Features=0x8<BMI1>
[...] SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
[...] TSC: P-state invariant, performance statistics
[...] real memory = 34359738368 (32768 MB)
[...] avail memory = 33316896768 (31773 MB)
[...] Event timer "LAPIC" quality 100
[...] ACPI APIC Table: <ALASKA A M I>
[...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
[...] FreeBSD/SMP: 1 package(s) x 8 core(s)
[...] random: unblocking device.
[...] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
[...] ioapic0 <Version 2.1> irqs 0-23
[...] ioapic1 <Version 2.1> irqs 24-55
[...] Launching APs: 1 5 2 3 4 7 6
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de
[...] smbios0: Version: 2.8, BCD Revision: 2.7
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <ALASKA A M I>
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 14318180 Hz quality 950
[...] Event timer "HPET" frequency 14318180 Hz quality 350
[...] Event timer "HPET1" frequency 14318180 Hz quality 350
[...] Event timer "HPET2" frequency 14318180 Hz quality 350
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
[...] pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfc000000-0xfcffffff,0xf0000000-0xf7ffffff,0xf8000000-0xf9ffffff irq 24 at device 0.0 on pci1
[...] vgapci0: Boot video device
[...] hdac0: <NVIDIA GT108 HDA Controller> mem 0xfd080000-0xfd083fff irq 25 at device 0.1 on pci1
[...] pcib2: <ACPI PCI-PCI bridge> irq 52 at device 3.0 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] igb0: <Intel(R) PRO/1000 82575EB (Copper)> port 0xd020-0xd03f mem 0xfdf20000-0xfdf3ffff,0xfde00000-0xfdefffff,0xfdf44000-0xfdf47fff irq 28 at device 0.0 on pci2
[...] igb0: EEPROM V1.13-1
[...] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb0: Using 4 RX queues 4 TX queues
[...] igb0: Using MSI-X interrupts with 5 vectors
[...] igb0: Ethernet address: ...
[...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024
[...] igb1: <Intel(R) PRO/1000 82575EB (Copper)> port 0xd000-0xd01f mem 0xfdf00000-0xfdf1ffff,0xfdc00000-0xfdcfffff,0xfdf40000-0xfdf43fff irq 29 at device 0.1 on pci2
[...] igb1: EEPROM V1.13-1
[...] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb1: Using 4 RX queues 4 TX queues
[...] igb1: Using MSI-X interrupts with 5 vectors
[...] igb1: Ethernet address: ...
[...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024
[...] pcib3: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe300000-0xfe300fff irq 44 at device 0.0 on pci3
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pcib4: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] igb2: <Intel(R) PRO/1000 82575EB (Copper)> port 0xc020-0xc03f mem 0xfda20000-0xfda3ffff,0xfd900000-0xfd9fffff,0xfda44000-0xfda47fff irq 46 at device 0.0 on pci4
[...] igb2: EEPROM V1.13-1
[...] igb2: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb2: Using 4 RX queues 4 TX queues
[...] igb2: Using MSI-X interrupts with 5 vectors
[...] igb2: Ethernet address: ...
[...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024
[...] igb3: <Intel(R) PRO/1000 82575EB (Copper)> port 0xc000-0xc01f mem 0xfda00000-0xfda1ffff,0xfd700000-0xfd7fffff,0xfda40000-0xfda43fff irq 47 at device 0.1 on pci4
[...] igb3: EEPROM V1.13-1
[...] igb3: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb3: Using 4 RX queues 4 TX queues
[...] igb3: Using MSI-X interrupts with 5 vectors
[...] igb3: Ethernet address: ...
[...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024
[...] pcib5: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0
[...] pci5: <ACPI PCI bus> on pcib5
[...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe200000-0xfe200fff irq 51 at device 0.0 on pci5
[...] xhci1: 32 bytes context size, 64-bit DMA
[...] usbus1 on xhci1
[...] usbus1: 5.0Gbps Super Speed USB v3.0
[...] ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe40b000-0xfe40b3ff irq 19 at device 17.0 on pci0
[...] ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
[...] ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe40a000-0xfe40afff irq 18 at device 18.0 on pci0
[...] usbus2 on ohci0
[...] usbus2: 12Mbps Full Speed USB v1.0
[...] ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe409000-0xfe4090ff irq 17 at device 18.2 on pci0
[...] usbus3: EHCI version 1.0
[...] usbus3 on ehci0
[...] usbus3: 480Mbps High Speed USB v2.0
[...] ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe408000-0xfe408fff irq 18 at device 19.0 on pci0
[...] usbus4 on ohci1
[...] usbus4: 12Mbps Full Speed USB v1.0
[...] ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe407000-0xfe4070ff irq 17 at device 19.2 on pci0
[...] usbus5: EHCI version 1.0
[...] usbus5 on ehci1
[...] usbus5: 480Mbps High Speed USB v2.0
[...] hdac1: <ATI SB600 HDA Controller> mem 0xfe400000-0xfe403fff irq 16 at device 20.2 on pci0
[...] isab0: <PCI-ISA bridge> at device 20.3 on pci0
[...] isa0: <ISA bus> on isab0
[...] pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
[...] pci6: <ACPI PCI bus> on pcib6
[...] re0: <Realtek PCI GbE Family Controller> port 0xb100-0xb1ff mem 0xfe141000-0xfe1410ff irq 20 at device 5.0 on pci6
[...] re0: Using I/O Ports
[...] re0: Using line-based interrupt
[...] re0: version:1.99.04
[...] re0: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re0: Ethernet address: ...
[...] re1: <Realtek PCI GbE Family Controller> port 0xb000-0xb0ff mem 0xfe140000-0xfe1400ff irq 21 at device 6.0 on pci6
[...] re1: Using I/O Ports
[...] re1: Using line-based interrupt
[...] re1: version:1.99.04
[...] re1: Ethernet address: ...
[...]
[...] This product is covered by one or more of the following patents:
[...] US6,570,884, US6,115,776, and US6,327,625.
[...] re1: Ethernet address: ...
[...] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe406000-0xfe406fff irq 18 at device 20.5 on pci0
[...] usbus6 on ohci2
[...] usbus6: 12Mbps Full Speed USB v1.0
[...] pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0
[...] pci7: <ACPI PCI bus> on pcib7
[...] alc0: <Killer E2200 Gigabit Ethernet> port 0xa000-0xa07f mem 0xfe000000-0xfe03ffff irq 16 at device 0.0 on pci7
[...] alc0: 11776 Tx FIFO, 12032 Rx FIFO
[...] alc0: Using 1 MSIX message(s).
[...] miibus0: <MII bus> on alc0
[...] atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
[...] atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
[...] alc0: Using defaults for TSO: 65518/35/2048
[...] alc0: Ethernet address: ...
[...] pcib8: <ACPI PCI-PCI bridge> at device 21.1 on pci0
[...] pci8: <ACPI PCI bus> on pcib8
[...] igb4: <Intel(R) PRO/1000 82575EB (Copper)> port 0x9020-0x903f mem 0xfd520000-0xfd53ffff,0xfd400000-0xfd4fffff,0xfd544000-0xfd547fff irq 17 at device 0.0 on pci8
[...] igb4: EEPROM V1.13-1
[...] igb4: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb4: Using 4 RX queues 4 TX queues
[...] igb4: Using MSI-X interrupts with 5 vectors
[...] igb4: Ethernet address: ...
[...] igb4: netmap queues/slots: TX 4/1024, RX 4/1024
[...] igb5: <Intel(R) PRO/1000 82575EB (Copper)> port 0x9000-0x901f mem 0xfd500000-0xfd51ffff,0xfd200000-0xfd2fffff,0xfd540000-0xfd543fff irq 18 at device 0.1 on pci8
[...] igb5: EEPROM V1.13-1
[...] igb5: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb5: Using 4 RX queues 4 TX queues
[...] igb5: Using MSI-X interrupts with 5 vectors
[...] igb5: Ethernet address: ...
[...] igb5: netmap queues/slots: TX 4/1024, RX 4/1024
[...] ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe405000-0xfe405fff irq 18 at device 22.0 on pci0
[...] usbus7 on ohci3
[...] usbus7: 12Mbps Full Speed USB v1.0
[...] ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe404000-0xfe4040ff irq 17 at device 22.2 on pci0
[...] usbus8: EHCI version 1.0
[...] usbus8 on ehci2
[...] usbus8: 480Mbps High Speed USB v2.0
[...] acpi_button0: <Power Button> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] hwpstate0: <Cool`n'Quiet 2.0> on cpu0
[...] Timecounter "TSC-low" frequency 1600012498 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <NVIDIA GT440 HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa0
[...] hdacc1: <NVIDIA GT440 HDA CODEC> at cad 1 on hdac0
[...] hdaa1: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc1
[...] pcm1: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa1
[...] hdacc2: <NVIDIA GT440 HDA CODEC> at cad 2 on hdac0
[...] hdaa2: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc2
[...] pcm2: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa2
[...] hdacc3: <NVIDIA GT440 HDA CODEC> at cad 3 on hdac0
[...] hdaa3: <NVIDIA GT440 Audio Function Group> at nid 1 on hdacc3
[...] pcm3: <NVIDIA GT440 (HDMI/DP 8ch)> at nid 5 on hdaa3
[...] hdacc4: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1
[...] hdaa4: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc4
[...] pcm4: <Realtek ALC1150 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4
[...] pcm5: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa4
[...] pcm6: <Realtek ALC1150 (Internal Digital)> at nid 17 on hdaa4
[...] pcm7: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa4
[...] ugen8.1: <ATI EHCI root HUB> at usbus8
[...] ugen4.1: <ATI OHCI root HUB> at usbus4
[...] ugen6.1: <ATI OHCI root HUB> at usbus6
[...] uhub0 on usbus8
[...] uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
[...] uhub1 on usbus6
[...] uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
[...] uhub2 on usbus4
[...] uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
[...] ugen7.1: <ATI OHCI root HUB> at usbus7
[...] ugen3.1: <ATI EHCI root HUB> at usbus3
[...] ugen0.1: <(0x1106) XHCI root HUB> at usbus0
[...] uhub3 on usbus7
[...] ugen1.1: <(0x1106) XHCI root HUB> at usbus1
[...] uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
[...] ugen2.1: <ATI OHCI root HUB> at usbus2
[...] uhub4 on usbus2
[...] uhub5 on usbus1
[...] uhub5: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
[...] uhub6 on usbus3
[...] uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
[...] ugen5.1: <ATI EHCI root HUB> at usbus5
[...] uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
[...] uhub8 on usbus5
[...] uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
[...] uhub7 on usbus0
[...] uhub7: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <Crucial CT275MX300SSD1 M0CR031> ACS-3 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 262321MB (537234768 512 byte sectors)
[...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
[...] cd0: <HL-DT-ST DVDRAM GH24NSB0 LN00> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
[...] cd0: 0MB (1 0 byte sectors)
[...] uhub1: 2 ports with 2 removable, self powered
[...] uhub3: 4 ports with 4 removable, self powered
[...] uhub4: 5 ports with 5 removable, self powered
[...] uhub2: 5 ports with 5 removable, self powered
[...] uhub5: 5 ports with 4 removable, self powered
[...] uhub7: 5 ports with 4 removable, self powered
[...] ugen1.2: <vendor 0x2109 USB2.0 Hub> at usbus1
[...] uhub9 on uhub5
[...] uhub9: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus1
[...] ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
[...] uhub10 on uhub7
[...] uhub10: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0
[...] Root mount waiting for: usbus0 usbus1 usbus3 usbus5 usbus8
[...] uhub10: 4 ports with 4 removable, self powered
[...] uhub9: 4 ports with 4 removable, self powered
[...] uhub0: 4 ports with 4 removable, self powered
[...] uhub6: 5 ports with 5 removable, self powered
[...] uhub8: 5 ports with 5 removable, self powered
[...] ugen2.2: <dakai PS/2+USB Keyboard> at usbus2
[...] ukbd0 on uhub4
[...] ukbd0: <dakai PS/2+USB Keyboard, class 0/0, rev 1.10/1b.80, addr 2> on usbus2
[...] kbd2 at ukbd0
[...] ukbd1 on uhub4
[...] ukbd1: <dakai PS/2+USB Keyboard, class 0/0, rev 1.10/1b.80, addr 2> on usbus2
[...] kbd3 at ukbd1