[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269825-cbaf3aa6b26b SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU D-1548 @ 2.00GHz (1995.49-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x50663 Family=0x6 Model=0x56 Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34359738368 (32768 MB) [...] avail memory = 33222950912 (31683 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs [...] FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] Launching APs: 1 11 14 12 4 10 9 3 5 2 15 6 8 7 13 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> numa-domain 0 on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci1 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> mem 0xfb800000-0xfb83ffff irq 26 at device 0.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] pcib4: <PCI-PCI bridge> irq 26 at device 8.0 numa-domain 0 on pci3 [...] pci4: <PCI bus> numa-domain 0 on pcib4 [...] pci4: <processor> at device 0.0 (no driver attached) [...] pcib5: <PCI-PCI bridge> irq 26 at device 16.0 numa-domain 0 on pci3 [...] pci5: <PCI bus> numa-domain 0 on pcib5 [...] pci5: <processor> at device 0.0 (no driver attached) [...] pcib6: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci1 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 32 at device 2.2 numa-domain 0 on pci1 [...] ACPI Warning: \134_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20221020/nsprepkg-251) [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pcib7: no PRT entry for 6.0.INTA [...] pcib7: no PRT entry for 6.0.INTB [...] ix0: <Intel(R) X552 (SFP+)> mem 0xfaa00000-0xfabfffff,0xfac04000-0xfac07fff irq 11 at device 0.0 numa-domain 0 on pci7 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 8 RX queues 8 TX queues [...] ix0: Using MSI-X interrupts with 9 vectors [...] ix0: allocated for 8 queues [...] ix0: allocated for 8 rx queues [...] ix0: Ethernet address: ... [...] ix0: fw 6.131.4 nvm 0.05.0 eTrack 0x800005c4 [...] ix0: netmap queues/slots: TX 8/2048, RX 8/2048 [...] ix1: <Intel(R) X552 (SFP+)> mem 0xfa800000-0xfa9fffff,0xfac00000-0xfac03fff irq 10 at device 0.1 numa-domain 0 on pci7 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 8 RX queues 8 TX queues [...] ix1: Using MSI-X interrupts with 9 vectors [...] ix1: allocated for 8 queues [...] ix1: allocated for 8 rx queues [...] ix1: Ethernet address: ... [...] ix1: fw 6.131.4 nvm 0.05.0 eTrack 0x800005c4 [...] ix1: netmap queues/slots: TX 8/2048, RX 8/2048 [...] pcib8: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci1 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci1 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] igb0: <Intel(R) I350 (Fiber)> port 0xe060-0xe07f mem 0xfb960000-0xfb97ffff,0xfba8c000-0xfba8ffff irq 42 at device 0.0 numa-domain 0 on pci9 [...] igb0: EEPROM V1.48-0 eTrack 0x80000696 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 8 RX queues 8 TX queues [...] igb0: Using MSI-X interrupts with 9 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb1: <Intel(R) I350 (Fiber)> port 0xe040-0xe05f mem 0xfb940000-0xfb95ffff,0xfba88000-0xfba8bfff irq 45 at device 0.1 numa-domain 0 on pci9 [...] igb1: EEPROM V1.48-0 eTrack 0x80000696 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 8 RX queues 8 TX queues [...] igb1: Using MSI-X interrupts with 9 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb2: <Intel(R) I350 (Fiber)> port 0xe020-0xe03f mem 0xfb920000-0xfb93ffff,0xfba84000-0xfba87fff irq 44 at device 0.2 numa-domain 0 on pci9 [...] igb2: EEPROM V1.48-0 eTrack 0x80000696 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 8 RX queues 8 TX queues [...] igb2: Using MSI-X interrupts with 9 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb3: <Intel(R) I350 (Fiber)> port 0xe000-0xe01f mem 0xfb900000-0xfb91ffff,0xfba80000-0xfba83fff irq 46 at device 0.3 numa-domain 0 on pci9 [...] igb3: EEPROM V1.48-0 eTrack 0x80000696 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 8 RX queues 8 TX queues [...] igb3: Using MSI-X interrupts with 9 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib10: <ACPI PCI-PCI bridge> irq 40 at device 3.3 numa-domain 0 on pci1 [...] pci10: <ACPI PCI bus> numa-domain 0 on pcib10 [...] pci1: <simple comms> at device 22.0 (no driver attached) [...] pci1: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xfbf04000-0xfbf043ff irq 18 at device 26.0 numa-domain 0 on pci1 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1 [...] pci11: <ACPI PCI bus> numa-domain 0 on pcib11 [...] igb4: <Intel(R) I350 (Copper)> port 0xd060-0xd07f mem 0xfbd60000-0xfbd7ffff,0xfbd8c000-0xfbd8ffff irq 16 at device 0.0 numa-domain 0 on pci11 [...] igb4: EEPROM V1.63-0 eTrack 0x800009fb [...] igb4: Using 1024 TX descriptors and 1024 RX descriptors [...] igb4: Using 8 RX queues 8 TX queues [...] igb4: Using MSI-X interrupts with 9 vectors [...] igb4: Ethernet address: ... [...] igb4: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb5: <Intel(R) I350 (Copper)> port 0xd040-0xd05f mem 0xfbd40000-0xfbd5ffff,0xfbd88000-0xfbd8bfff irq 17 at device 0.1 numa-domain 0 on pci11 [...] igb5: EEPROM V1.63-0 eTrack 0x800009fb [...] igb5: Using 1024 TX descriptors and 1024 RX descriptors [...] igb5: Using 8 RX queues 8 TX queues [...] igb5: Using MSI-X interrupts with 9 vectors [...] igb5: Ethernet address: ... [...] igb5: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb6: <Intel(R) I350 (Copper)> port 0xd020-0xd03f mem 0xfbd20000-0xfbd3ffff,0xfbd84000-0xfbd87fff irq 18 at device 0.2 numa-domain 0 on pci11 [...] igb6: EEPROM V1.63-0 eTrack 0x800009fb [...] igb6: Using 1024 TX descriptors and 1024 RX descriptors [...] igb6: Using 8 RX queues 8 TX queues [...] igb6: Using MSI-X interrupts with 9 vectors [...] igb6: Ethernet address: ... [...] igb6: netmap queues/slots: TX 8/1024, RX 8/1024 [...] igb7: <Intel(R) I350 (Copper)> port 0xd000-0xd01f mem 0xfbd00000-0xfbd1ffff,0xfbd80000-0xfbd83fff irq 19 at device 0.3 numa-domain 0 on pci11 [...] igb7: EEPROM V1.63-0 eTrack 0x800009fb [...] igb7: Using 1024 TX descriptors and 1024 RX descriptors [...] igb7: Using 8 RX queues 8 TX queues [...] igb7: Using MSI-X interrupts with 9 vectors [...] igb7: Ethernet address: ... [...] igb7: netmap queues/slots: TX 8/1024, RX 8/1024 [...] pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci1 [...] pci12: <ACPI PCI bus> numa-domain 0 on pcib12 [...] igb8: <Intel(R) I210 (Copper)> port 0xc000-0xc01f mem 0xfbc00000-0xfbc7ffff,0xfbc80000-0xfbc83fff irq 16 at device 0.0 numa-domain 0 on pci12 [...] igb8: EEPROM V3.20-0 eTrack 0x8000054e [...] igb8: Using 1024 TX descriptors and 1024 RX descriptors [...] igb8: Using 4 RX queues 4 TX queues [...] igb8: Using MSI-X interrupts with 5 vectors [...] igb8: Ethernet address: ... [...] igb8: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib13: <ACPI PCI-PCI bridge> irq 17 at device 28.5 numa-domain 0 on pci1 [...] pci13: <ACPI PCI bus> numa-domain 0 on pcib13 [...] igb9: <Intel(R) I210 (Copper)> port 0xb000-0xb01f mem 0xfbb00000-0xfbb7ffff,0xfbb80000-0xfbb83fff irq 17 at device 0.0 numa-domain 0 on pci13 [...] igb9: EEPROM V3.25-0 eTrack 0x800005d0 [...] igb9: Using 1024 TX descriptors and 1024 RX descriptors [...] igb9: Using 4 RX queues 4 TX queues [...] igb9: Using MSI-X interrupts with 5 vectors [...] igb9: Ethernet address: ... [...] igb9: netmap queues/slots: TX 4/1024, RX 4/1024 [...] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfbf03000-0xfbf033ff irq 18 at device 29.0 numa-domain 0 on pci1 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfbf02000-0xfbf027ff irq 16 at device 31.2 numa-domain 0 on pci1 [...] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b5a00001400 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b5a00001400 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b5a00001400 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b5a00001400 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b5a00001400 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b3800001400 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b5a00001400 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b5a00001400 [...] device_attach: est15 attach returned 6 [...] Timecounter "TSC" frequency 1995379289 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] uhub0 numa-domain 0 on usbus1 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ada0 at ahcich4 bus 0 scbus0 target 0 lun 0 [...] ada0: <SQF-SM8M1-32G-SBC SBFMA010> ACS-4 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 30533MB (62533296 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ses0: ada0,pass0 in 'Slot 04', SATA Slot: scbus0 target 0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 2 ports with 2 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus0 usbus1 [...] ugen0.2: <vendor 0x8087 product 0x8008> at usbus0 [...] uhub2 numa-domain 0 on uhub1 [...] uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 [...] uhub3 numa-domain 0 on uhub0 [...] uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] uhub3: 4 ports with 4 removable, self powered