Probe #57b6c258ad of HP 843F Desktop Computer (Slim Desktop 290-p0xxx)
Log: dmesg
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.1-RELEASE-p7 stable/23.1-n250445-fb81510bd0e SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(vga): resolution 640x480
[...] CPU: Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz (2100.00-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x121<LAHF,ABM,Prefetch>
[...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
[...] Structured Extended Features2=0x40000000<SGXLC>
[...] Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[...] TSC: P-state invariant, performance statistics
[...] real memory = 4294967296 (4096 MB)
[...] avail memory = 3896262656 (3715 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <HPQOEM SLIC-CPC>
[...] FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
[...] FreeBSD/SMP: 1 package(s) x 6 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119
[...] Launching APs: 5 2 4 1 3
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] efirtc0: <EFI Realtime Clock>
[...] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[...] smbios0: <System Management BIOS> at iomem 0x88f9b000-0x88f9b01e
[...] smbios0: Version: 3.2, BCD Revision: 3.2
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
[...] acpi0: <HPQOEM SLIC-CPC>
[...] acpi0: Power Button (fixed)
[...] cpu0: <ACPI CPU> on acpi0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[...] Timecounter "HPET" frequency 24000000 Hz quality 950
[...] Event timer "HPET" frequency 24000000 Hz quality 550
[...] Event timer "HPET1" frequency 24000000 Hz quality 440
[...] Event timer "HPET2" frequency 24000000 Hz quality 440
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] igb0: <Intel(R) I350 (Copper)> mem 0xa1200000-0xa12fffff,0xa1404000-0xa1407fff at device 0.0 on pci1
[...] igb0: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd0
[...] igb0: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb0: Using 6 RX queues 6 TX queues
[...] igb0: Using MSI-X interrupts with 7 vectors
[...] igb0: Ethernet address: ...
[...] igb0: netmap queues/slots: TX 6/1024, RX 6/1024
[...] igb1: <Intel(R) I350 (Copper)> mem 0xa1100000-0xa11fffff,0xa1400000-0xa1403fff at device 0.1 on pci1
[...] igb1: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd0
[...] igb1: Using 1024 TX descriptors and 1024 RX descriptors
[...] igb1: Using 6 RX queues 6 TX queues
[...] igb1: Using MSI-X interrupts with 7 vectors
[...] igb1: Ethernet address: ...
[...] igb1: netmap queues/slots: TX 6/1024, RX 6/1024
[...] vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xa1800000-0xa180ffff at device 20.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] pci0: <memory, RAM> at device 20.2 (no driver attached)
[...] sdhci_pci0: <Generic SD HCI> mem 0xa181f000-0xa181ffff at device 20.5 on pci0
[...] sdhci_pci0: 1 slot(s) allocated
[...] pci0: <serial bus> at device 21.0 (no driver attached)
[...] pci0: <serial bus> at device 21.1 (no driver attached)
[...] pci0: <simple comms> at device 22.0 (no driver attached)
[...] ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa1814000-0xa1815fff,0xa181b000-0xa181b0ff,0xa181a000-0xa181a7ff at device 23.0 on pci0
[...] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] ahcich2: <AHCI channel> at channel 2 on ahci0
[...] ahcich3: <AHCI channel> at channel 3 on ahci0
[...] ahcich4: <AHCI channel> at channel 4 on ahci0
[...] ahcich5: <AHCI channel> at channel 5 on ahci0
[...] ahciem0: <AHCI enclosure management bridge> on ahci0
[...] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xa1704000-0xa1704fff,0xa1700000-0xa1703fff at device 0.0 on pci2
[...] re0: Using 1 MSI-X message
[...] re0: ASPM disabled
[...] re0: Chip rev. 0x54000000
[...] re0: MAC rev. 0x00100000
[...] miibus0: <MII bus> on re0
[...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
[...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[...] re0: Using defaults for TSO: 65518/35/2048
[...] re0: Ethernet address: ...
[...] re0: netmap queues/slots: TX 1/256, RX 1/256
[...] pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] pci3: <network> at device 0.0 (no driver attached)
[...] pcib4: <ACPI PCI-PCI bridge> at device 29.0 on pci0
[...] pci4: <ACPI PCI bus> on pcib4
[...] nvme0: <Generic NVMe Device> mem 0xa1500000-0xa1503fff,0xa1504000-0xa15040ff at device 0.0 on pci4
[...] pci0: <simple comms> at device 30.0 (no driver attached)
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] hdac0: <Intel Coffee Lake HDA Controller> mem 0xa1810000-0xa1813fff,0xa1000000-0xa10fffff at device 31.3 on pci0
[...] pci0: <serial bus> at device 31.5 (no driver attached)
[...] acpi_button0: <Sleep Button> on acpi0
[...] acpi_button1: <Power Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] acpi_tz1: <Thermal Zone> on acpi0
[...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 3 flags 0x10 on acpi0
[...] uart0: console (115200,n,8,1)
[...] acpi_syscontainer0: <System Container> on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hwpstate_intel0: <Intel Speed Shift> on cpu0
[...] hwpstate_intel1: <Intel Speed Shift> on cpu1
[...] hwpstate_intel2: <Intel Speed Shift> on cpu2
[...] hwpstate_intel3: <Intel Speed Shift> on cpu3
[...] hwpstate_intel4: <Intel Speed Shift> on cpu4
[...] hwpstate_intel5: <Intel Speed Shift> on cpu5
[...] Timecounter "TSC" frequency 2111995652 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] nvme0: Allocated 194MB host memory buffer
[...] ugen0.1: <Intel XHCI root HUB> at usbus0
[...] nvd0: <WDC PC SN530 SDBPNPZ-256G-1006> NVMe namespace
[...] nvd0: 244198MB (500118192 512 byte sectors)
[...] hdacc0: <Realtek ALC671 HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <Realtek ALC671 Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <Realtek ALC671 (Rear Analog)> at nid 20 and 27 on hdaa0
[...] pcm1: <Realtek ALC671 (Analog)> at nid 33 and 24 on hdaa0
[...] hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0
[...] hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
[...] pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
[...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
[...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
[...] ses0: SEMB SES Device
[...] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
[...] cd0: <hp HLDS DVDRW GUD1N LD04> Removable CD-ROM SCSI device
[...] cd0: Serial Number...
[...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
[...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
[...] ses0: pass0,cd0 in 'Slot 02', SATA Slot: scbus2 target 0
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] uhub0 on usbus0
[...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0