[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269701-7c59d89f8cd SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Core(TM) 3 N355 (1881.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16338173952 (15581 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 4 5 7 6 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cd4000-0x75cd401e [...] smbios0: Version: 3.6, BCD Revision: 3.6 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x60e7000000-0x60e7ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60e8110000-0x60e811ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60e8100000-0x60e810ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x60e812b000-0x60e812bfff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x80c00000-0x80c03fff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80a00000-0x80afffff,0x80b00000-0x80b03fff at device 0.0 on pci2 [...] igc0: EEPROM V2.17-0 eTrack 0x80000308 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80800000-0x808fffff,0x80900000-0x80903fff at device 0.0 on pci3 [...] igc1: EEPROM V2.17-0 eTrack 0x80000308 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 29.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80600000-0x806fffff,0x80700000-0x80703fff at device 0.0 on pci4 [...] igc2: EEPROM V2.17-0 eTrack 0x80000308 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80500000-0x80503fff at device 0.0 on pci5 [...] igc3: EEPROM V2.17-0 eTrack 0x80000308 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] pci0: <serial bus> at device 30.3 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x60e8120000-0x60e8123fff,0x60e8000000-0x60e80fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1881640479 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mmc0: No compatible cards found on bus [...] nvme0: Allocated 8MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <HYV256X3(Pro) SN12109 00000000000000001236> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.2: <USB Device USB 2.0 Hub> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 1> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] ugen1.3: <USB Storage USB Storage> at usbus1 [...] umass0 on uhub1 [...] umass0: <USB Storage USB Storage, class 0/0, rev 2.00/14.04, addr 2> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:1:0: Attached to scbus1 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1404> Removable Direct Access SPC-4 SCSI device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Alder Lake-M I2C Controller-1> at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x60e8128000-0x60e81280ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] lo0: link state changed to UP [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igc1: link state changed to DOWN [...] igc0: link state changed to DOWN [...] tun3: changing name to 'ovpns3' [...] wg0: link state changed to UP [...] igc1: link state changed to UP [...] igc0: link state changed to UP [...] 850.336401 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 850.815023 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igc1: link state changed to DOWN [...] igc1: link state changed to UP [...] ovpns3: link state changed to UP [...] 956.697608 [1167] generic_netmap_attach Emulated adapter for ovpns3 created (prev was NULL) [...] 956.707020 [1072] generic_netmap_dtor Emulated netmap adapter for ovpns3 destroyed [...] 956.715841 [1167] generic_netmap_attach Emulated adapter for ovpns3 created (prev was NULL) [...] 956.725315 [1072] generic_netmap_dtor Emulated netmap adapter for ovpns3 destroyed [...] 956.734127 [1167] generic_netmap_attach Emulated adapter for ovpns3 created (prev was NULL) [...] 956.743628 [1072] generic_netmap_dtor Emulated netmap adapter for ovpns3 destroyed [...] ovpns3: permanently promiscuous mode enabled [...] 956.754159 [1167] generic_netmap_attach Emulated adapter for ovpns3 created (prev was NULL) [...] 956.763597 [ 319] generic_netmap_register Emulated adapter for ovpns3 activated [...] 956.789586 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 956.798138 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 956.806652 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igc0: permanently promiscuous mode enabled [...] 956.816838 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igc0: link state changed to DOWN [...] 957.063498 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 957.071984 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 957.080506 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 957.328051 [1167] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 957.337238 [1072] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] 957.345788 [1167] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 957.355015 [1072] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] 957.363571 [1167] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 957.372803 [1072] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] wg0: permanently promiscuous mode enabled [...] 957.383011 [1167] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 957.392166 [ 319] generic_netmap_register Emulated adapter for wg0 activated [...] igc0: link state changed to UP [...] igc0: permanently promiscuous mode disabled [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] igc0: link state changed to DOWN [...] 570.078154 [ 294] generic_netmap_unregister Emulated adapter for wg0 deactivated [...] 570.086145 [1072] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] 570.189543 [ 294] generic_netmap_unregister Emulated adapter for ovpns3 deactivated [...] 570.197832 [1072] generic_netmap_dtor Emulated netmap adapter for ovpns3 destroyed [...] igc1: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] ovpns3: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 1 1 0 0 0 0 done [...] All buffers synced. [...] Uptime: 5d16h36m23s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p2 stable/25.1-n269753-d27208952e13 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Core(TM) 3 N355 (1881.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16338173952 (15581 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 6 7 4 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cd4000-0x75cd401e [...] smbios0: Version: 3.6, BCD Revision: 3.6 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x60e7000000-0x60e7ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60e8110000-0x60e811ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60e8100000-0x60e810ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x60e812b000-0x60e812bfff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x80c00000-0x80c03fff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80a00000-0x80afffff,0x80b00000-0x80b03fff at device 0.0 on pci2 [...] igc0: EEPROM V2.17-0 eTrack 0x80000308 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80800000-0x808fffff,0x80900000-0x80903fff at device 0.0 on pci3 [...] igc1: EEPROM V2.17-0 eTrack 0x80000308 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 29.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80600000-0x806fffff,0x80700000-0x80703fff at device 0.0 on pci4 [...] igc2: EEPROM V2.17-0 eTrack 0x80000308 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80500000-0x80503fff at device 0.0 on pci5 [...] igc3: EEPROM V2.17-0 eTrack 0x80000308 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] pci0: <serial bus> at device 30.3 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x60e8120000-0x60e8123fff,0x60e8000000-0x60e80fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1881640723 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] mmc0: No compatible cards found on bus [...] nvme0: Allocated 8MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <HYV256X3(Pro) SN12109 00000000000000001236> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.2: <USB Device USB 2.0 Hub> at usbus1 [...] uhub2 on uhub1 [...] uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 1> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] ugen1.3: <USB Storage USB Storage> at usbus1 [...] umass0 on uhub1 [...] umass0: <USB Storage USB Storage, class 0/0, rev 2.00/14.04, addr 2> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:1:0: Attached to scbus1 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1404> Removable Direct Access SPC-4 SCSI device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] Dual Console: Serial Primary, Video Secondary [...] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Alder Lake-M I2C Controller-1> at device 21.1 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x60e8128000-0x60e81280ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: cannot find EC device [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: cannot find EC device [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] lo0: link state changed to UP [...] qat_ocf0: <QAT engine> [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] pflog0: permanently promiscuous mode enabled [...] igc1: link state changed to DOWN [...] igc0: link state changed to DOWN [...] tun3: changing name to 'ovpns3' [...] wg0: link state changed to UP [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] 660.670929 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 661.068752 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igc1: link state changed to DOWN [...] igc1: link state changed to UP [...] ovpns3: link state changed to UP [...] 765.450096 [1167] generic_netmap_attach Emulated adapter for ovpns3 created (prev was NULL) [...] 765.459555 [1072] generic_netmap_dtor Emulated netmap adapter for ovpns3 destroyed [...] 765.468378 [1167] generic_netmap_attach Emulated adapter for ovpns3 created (prev was NULL) [...] 765.477838 [1072] generic_netmap_dtor Emulated netmap adapter for ovpns3 destroyed [...] 765.486671 [1167] generic_netmap_attach Emulated adapter for ovpns3 created (prev was NULL) [...] 765.496156 [1072] generic_netmap_dtor Emulated netmap adapter for ovpns3 destroyed [...] ovpns3: permanently promiscuous mode enabled [...] 765.506953 [1167] generic_netmap_attach Emulated adapter for ovpns3 created (prev was NULL) [...] 765.516411 [ 319] generic_netmap_register Emulated adapter for ovpns3 activated [...] 765.542701 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 765.551249 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 765.559762 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igc0: permanently promiscuous mode enabled [...] 765.569963 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] igc0: link state changed to DOWN [...] 765.816695 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 765.825174 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 765.833719 [ 852] iflib_netmap_config txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048 [...] 766.081373 [1167] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 766.090500 [1072] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] 766.099059 [1167] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 766.108255 [1072] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] 766.116804 [1167] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 766.126022 [1072] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] wg0: permanently promiscuous mode enabled [...] 766.136211 [1167] generic_netmap_attach Emulated adapter for wg0 created (prev was NULL) [...] 766.145366 [ 319] generic_netmap_register Emulated adapter for wg0 activated [...] igc0: link state changed to UP [...] igc0: permanently promiscuous mode disabled [...] tun1: changing name to 'ovpns1' [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] ovpns1: link state changed to DOWN [...] ovpns1: link state changed to UP [...] 360.082694 [4335] netmap_transmit igc0 full hwcur 794 hwtail 302 qlen 491 [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] ovpns3: permanently promiscuous mode disabled [...] ovpns3: link state changed to DOWN [...] ovpns3: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] arprequest_internal: cannot find matching address [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] wg0: permanently promiscuous mode disabled [...] 509.043070 [4335] netmap_transmit igc0 full hwcur 857 hwtail 143 qlen 713 [...] 509.051342 [4335] netmap_transmit igc0 full hwcur 857 hwtail 143 qlen 713 [...] 040.768135 [4335] netmap_transmit igc0 full hwcur 395 hwtail 874 qlen 544 [...] 040.795337 [4335] netmap_transmit igc0 full hwcur 874 hwtail 394 qlen 479 [...] 060.245342 [4335] netmap_transmit igc0 full hwcur 590 hwtail 33 qlen 556 [...] 060.281873 [4335] netmap_transmit igc0 full hwcur 33 hwtail 589 qlen 467 [...] 064.710645 [4335] netmap_transmit igc0 full hwcur 50 hwtail 572 qlen 501 [...] 064.718812 [4335] netmap_transmit igc0 full hwcur 50 hwtail 572 qlen 501 [...] 066.394467 [4335] netmap_transmit igc0 full hwcur 442 hwtail 32 qlen 409 [...] 066.529195 [4335] netmap_transmit igc0 full hwcur 422 hwtail 906 qlen 539 [...] 131.017648 [4335] netmap_transmit igc0 full hwcur 79 hwtail 773 qlen 329 [...] 131.660473 [4335] netmap_transmit igc0 full hwcur 541 hwtail 957 qlen 607 [...] 138.489182 [4335] netmap_transmit igc0 full hwcur 28 hwtail 537 qlen 514 [...] 138.996875 [4335] netmap_transmit igc0 full hwcur 720 hwtail 212 qlen 507 [...] 145.488468 [4335] netmap_transmit igc0 full hwcur 296 hwtail 822 qlen 497 [...] 145.521983 [4335] netmap_transmit igc0 full hwcur 822 hwtail 295 qlen 526 [...] 148.992768 [4335] netmap_transmit igc0 full hwcur 894 hwtail 471 qlen 422 [...] 149.001020 [4335] netmap_transmit igc0 full hwcur 894 hwtail 471 qlen 422 [...] 149.048849 [4335] netmap_transmit igc0 full hwcur 893 hwtail 412 qlen 480 [...] 161.891773 [4335] netmap_transmit igc0 full hwcur 835 hwtail 399 qlen 435 [...] 161.900007 [4335] netmap_transmit igc0 full hwcur 835 hwtail 399 qlen 435 [...] 165.676508 [4335] netmap_transmit igc0 full hwcur 722 hwtail 211 qlen 510 [...] 180.085454 [4335] netmap_transmit igc0 full hwcur 762 hwtail 372 qlen 389 [...] 180.126056 [4335] netmap_transmit igc0 full hwcur 761 hwtail 144 qlen 616 [...] 195.510196 [4335] netmap_transmit igc0 full hwcur 954 hwtail 555 qlen 398 [...] 195.931336 [4335] netmap_transmit igc0 full hwcur 187 hwtail 608 qlen 602 [...] 196.158353 [4335] netmap_transmit igc0 full hwcur 871 hwtail 405 qlen 465 [...] 196.186666 [4335] netmap_transmit igc0 full hwcur 405 hwtail 870 qlen 558 [...] 201.428829 [4335] netmap_transmit igc0 full hwcur 503 hwtail 103 qlen 399 [...] 201.471530 [4335] netmap_transmit igc0 full hwcur 502 hwtail 33 qlen 468 [...] igc0: link state changed to DOWN [...] 812.457659 [ 294] generic_netmap_unregister Emulated adapter for wg0 deactivated [...] 812.465680 [1072] generic_netmap_dtor Emulated netmap adapter for wg0 destroyed [...] 812.592600 [ 294] generic_netmap_unregister Emulated adapter for ovpns3 deactivated [...] 812.600894 [1072] generic_netmap_dtor Emulated netmap adapter for ovpns3 destroyed [...] 813.641392 [1188] netmap_extra_free breaking with head 115390632 [...] igc1: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] ovpns3: link state changed to DOWN [...] ovpns1: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 1 1 1 1 0 0 0 0 done [...] All buffers synced. [...] Uptime: 28d7h47m3s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269769-0381600e81a4 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(vga): resolution 640x480 [...] CPU microcode: no matching update found [...] CPU: Intel(R) Core(TM) 3 N355 (1881.60-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16338173952 (15581 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I > [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [...] FreeBSD/SMP: 2 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 7 4 6 5 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x75cd4000-0x75cd401e [...] smbios0: Version: 3.6, BCD Revision: 3.6 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <ALASKA A M I > [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x60e7000000-0x60e7ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x60e8110000-0x60e811ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x60e8100000-0x60e810ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] pci0: <serial bus> at device 21.1 (no driver attached) [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x60e812b000-0x60e812bfff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] nvme0: <Generic NVMe Device> mem 0x80c00000-0x80c03fff at device 0.0 on pci1 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80a00000-0x80afffff,0x80b00000-0x80b03fff at device 0.0 on pci2 [...] igc0: EEPROM V2.17-0 eTrack 0x80000308 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80800000-0x808fffff,0x80900000-0x80903fff at device 0.0 on pci3 [...] igc1: EEPROM V2.17-0 eTrack 0x80000308 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 29.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80600000-0x806fffff,0x80700000-0x80703fff at device 0.0 on pci4 [...] igc2: EEPROM V2.17-0 eTrack 0x80000308 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.2 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80500000-0x80503fff at device 0.0 on pci5 [...] igc3: EEPROM V2.17-0 eTrack 0x80000308 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] pci0: <serial bus> at device 30.3 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x60e8120000-0x60e8123fff,0x60e8000000-0x60e80fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] acpi_button0: <Sleep Button> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button1: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] Timecounter "TSC" frequency 1881639528 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] mmc0: No compatible cards found on bus [...] nvme0: Allocated 8MB host memory buffer [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <HYV256X3(Pro) SN12109 00000000000000001236> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 244198MB (500118192 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus1ugen1.2: <USB Device USB 2.0 Hub> at usbus1 [...] [...] uhub2 on uhub1 [...] uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 1> on usbus1 [...] uhub2: 4 ports with 4 removable, self powered [...] Root mount waiting for: usbus1 [...] Root mount waiting for: usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB Storage USB Storage (0x05e3:0x0751) [...] ugen1.3: <USB Storage USB Storage> at usbus1 [...] umass0 on uhub1 [...] umass0: <USB Storage USB Storage, class 0/0, rev 2.00/14.04, addr 2> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0xc101 [...] umass0:1:0: Attached to scbus1 [...] (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 [...] (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error [...] (probe0:umass-sim0:0:0:0): SCSI status: Check Condition [...] (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) [...] (probe0:umass-sim0:0:0:0): Error 6, Unretryable error [...] da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 [...] da0: <Generic STORAGE DEVICE 1404> Removable Direct Access SPC-4 SCSI device [...] da0: 40.000MB/s transfers [...] da0: Attempt to query device size failed: NOT READY, Medium not present [...] da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> [...] Dual Console: Serial Primary, Video Secondary [...] pid 31 (zpool) is attempting to use unsafe AIO requests - not logging anymore