[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p1 stable/23.7-n254737-f223233eef4 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(efifb): resolution 800x600 [...] CPU: Intel(R) Xeon(R) CPU E5-2430L v2 @ 2.40GHz (2400.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 51539607552 (49152 MB) [...] avail memory = 50034827264 (47716 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs [...] FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic1: MADT APIC ID 1 != hw id 15 [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 32-55 [...] Launching APs: 1 9 7 5 6 4 11 8 3 2 10 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0xc89b1000-0xc89b101e [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci0: <ACPI PCI bus> numa-domain 0 on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0 [...] pci1: <ACPI PCI bus> numa-domain 0 on pcib1 [...] mps0: <Avago Technologies (LSI) SAS2308> port 0xfc00-0xfcff mem 0xd8ff0000-0xd8ffffff,0xd8f80000-0xd8fbffff irq 34 at device 0.0 numa-domain 0 on pci1 [...] mps0: Firmware: XXX.XXX.XXX.XXX, Driver: XXX.XXX.XXX.XXX-fbsd [...] mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc> [...] pcib2: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] ix0: <Intel(R) X540-AT2> mem 0xd5000000-0xd51fffff,0xd55f8000-0xd55fbfff irq 48 at device 0.0 numa-domain 0 on pci2 [...] ix0: Using 2048 TX descriptors and 2048 RX descriptors [...] ix0: Using 6 RX queues 6 TX queues [...] ix0: Using MSI-X interrupts with 7 vectors [...] ix0: allocated for 6 queues [...] ix0: allocated for 6 rx queues [...] ix0: Ethernet address: ... [...] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix0: Option ROM V1-b1446-p0 eTrack 0x800005d3 PHY FW V286 [...] ix0: netmap queues/slots: TX 6/2048, RX 6/2048 [...] ix1: <Intel(R) X540-AT2> mem 0xd5200000-0xd53fffff,0xd55fc000-0xd55fffff irq 52 at device 0.1 numa-domain 0 on pci2 [...] ix1: Using 2048 TX descriptors and 2048 RX descriptors [...] ix1: Using 6 RX queues 6 TX queues [...] ix1: Using MSI-X interrupts with 7 vectors [...] ix1: allocated for 6 queues [...] ix1: allocated for 6 rx queues [...] ix1: Ethernet address: ... [...] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 [...] ix1: Option ROM V1-b1446-p0 eTrack 0x800005d3 PHY FW V286 [...] ix1: netmap queues/slots: TX 6/2048, RX 6/2048 [...] pcib3: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0 [...] pci3: <PCI bus> numa-domain 0 on pcib3 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdccfd000-0xdccfd3ff irq 23 at device 26.0 numa-domain 0 on pci0 [...] usbus0: EHCI version 1.0 [...] usbus0 numa-domain 0 on ehci0 [...] usbus0: 480Mbps High Speed USB v2.0 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] pcib5: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci4 [...] pci5: <PCI bus> numa-domain 0 on pcib5 [...] pcib6: <PCI-PCI bridge> at device 2.0 numa-domain 0 on pci5 [...] pci6: <PCI bus> numa-domain 0 on pcib6 [...] igb0: <Intel(R) PRO/1000 VT 82575GB (Quad Copper)> port 0xecc0-0xecdf mem 0xdc5a0000-0xdc5bffff,0xdc000000-0xdc1fffff,0xdc5f8000-0xdc5fbfff irq 18 at device 0.0 numa-domain 0 on pci6 [...] igb0: EEPROM V1.77-0 eTrack 0x880c0000 [...] igb0: Using 1024 TX descriptors and 1024 RX descriptors [...] igb0: Using 4 RX queues 4 TX queues [...] igb0: Using MSI-X interrupts with 5 vectors [...] igb0: Ethernet address: ... [...] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb1: <Intel(R) PRO/1000 VT 82575GB (Quad Copper)> port 0xece0-0xecff mem 0xdc5c0000-0xdc5dffff,0xdc200000-0xdc3fffff,0xdc5fc000-0xdc5fffff irq 19 at device 0.1 numa-domain 0 on pci6 [...] igb1: EEPROM V1.77-0 eTrack 0x880c0000 [...] igb1: Using 1024 TX descriptors and 1024 RX descriptors [...] igb1: Using 4 RX queues 4 TX queues [...] igb1: Using MSI-X interrupts with 5 vectors [...] igb1: Ethernet address: ... [...] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib7: <PCI-PCI bridge> at device 4.0 numa-domain 0 on pci5 [...] pci7: <PCI bus> numa-domain 0 on pcib7 [...] igb2: <Intel(R) PRO/1000 VT 82575GB (Quad Copper)> port 0xdcc0-0xdcdf mem 0xdcba0000-0xdcbbffff,0xdc600000-0xdc7fffff,0xdcbf8000-0xdcbfbfff irq 16 at device 0.0 numa-domain 0 on pci7 [...] igb2: EEPROM V1.77-0 eTrack 0x880e0000 [...] igb2: Using 1024 TX descriptors and 1024 RX descriptors [...] igb2: Using 4 RX queues 4 TX queues [...] igb2: Using MSI-X interrupts with 5 vectors [...] igb2: Ethernet address: ... [...] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] igb3: <Intel(R) PRO/1000 VT 82575GB (Quad Copper)> port 0xdce0-0xdcff mem 0xdcbc0000-0xdcbdffff,0xdc800000-0xdc9fffff,0xdcbfc000-0xdcbfffff irq 17 at device 0.1 numa-domain 0 on pci7 [...] igb3: EEPROM V1.77-0 eTrack 0x880e0000 [...] igb3: Using 1024 TX descriptors and 1024 RX descriptors [...] igb3: Using 4 RX queues 4 TX queues [...] igb3: Using MSI-X interrupts with 5 vectors [...] igb3: Ethernet address: ... [...] igb3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0 [...] pci8: <ACPI PCI bus> numa-domain 0 on pcib8 [...] bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd56a0000-0xd56affff,0xd56b0000-0xd56bffff,0xd56c0000-0xd56cffff irq 16 at device 0.0 numa-domain 0 on pci8 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd56d0000-0xd56dffff,0xd56e0000-0xd56effff,0xd56f0000-0xd56fffff irq 17 at device 0.1 numa-domain 0 on pci8 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] bge1: Ethernet address: ... [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 [...] pci11: <PCI bus> numa-domain 0 on pcib11 [...] pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11 [...] pci12: <PCI bus> numa-domain 0 on pcib12 [...] vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdb7fc000-0xdb7fffff,0xda800000-0xdaffffff irq 19 at device 0.0 numa-domain 0 on pci12 [...] vgapci0: Boot video device [...] pcib13: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci10 [...] pci13: <PCI bus> numa-domain 0 on pcib13 [...] ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdccfe000-0xdccfe3ff irq 22 at device 29.0 numa-domain 0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci1 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib14: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 [...] pci14: <PCI bus> numa-domain 0 on pcib14 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] ahci0: <Intel Patsburg AHCI SATA controller> port 0xcce8-0xccef,0xccf8-0xccfb,0xccf0-0xccf7,0xccfc-0xccff,0xccc0-0xccdf mem 0xdccff000-0xdccff7ff irq 20 at device 31.2 numa-domain 0 on pci0 [...] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] pcib15: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 [...] pci15: <ACPI PCI bus> numa-domain 0 on pcib15 [...] pci15: <dasp, performance counters> at device 14.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.1 (no driver attached) [...] pci15: <dasp, performance counters> at device 19.5 (no driver attached) [...] pcib16: <ACPI Host-PCI bridge> on acpi0 [...] pci16: <ACPI PCI bus> on pcib16 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1199999699 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen0.1: <Intel EHCI root HUB> at usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 numa-domain 0 on usbus0 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [...] uhub1 numa-domain 0 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] Trying to mount root from zfs:root/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: CAM usbus0 usbus1 [...] ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 [...] uhub2 numa-domain 0 on uhub0 [...] uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: CAM usbus0 usbus1 [...] uhub2: 6 ports with 6 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0 [...] Root mount waiting for: CAM usbus0 usbus1 [...] uhub4: 6 ports with 6 removable, self powered [...] Root mount waiting for: CAM usbus0 usbus1 [...] usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Innostor PenDrive (0x1f75:0x0917) [...] usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Innostor PenDrive (0x1f75:0x0917) [...] ugen1.3: <Innostor PenDrive> at usbus1 [...] umass0 numa-domain 0 on uhub3 [...] umass0: <Innostor PenDrive, class 0/0, rev 2.10/0.01, addr 3> on usbus1 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:7:0: Attached to scbus7 [...] ugen0.4: <Avocent Keyboard/Mouse Function> at usbus0 [...] ukbd0 numa-domain 0 on uhub4 [...] ukbd0: <Keyboard> on usbus0 [...] kbd1 at ukbd0 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] da2 at umass-sim0 bus 0 scbus7 target 0 lun 0 [...] da2: <Innostor Innostor 1.00> Removable Direct Access SPC-4 SCSI device [...] da2: Serial Number... [...] da2: 40.000MB/s transfers [...] da2: 15000MB (30720000 512 byte sectors) [...] da2: quirks=0x12<NO_6_BYTE,NO_RC16> [...] da0 at mps0 bus 0 scbus0 target 0 lun 0 [...] da0: <ATA Samsung SSD 870 2B6Q> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 600.000MB/s transfers [...] da0: Command Queueing enabled [...] da0: 476940MB (976773168 512 byte sectors) [...] da1 at mps0 bus 0 scbus0 target 1 lun 0 [...] da1: <ATA Samsung SSD 870 2B6Q> Fixed Direct Access SPC-4 SCSI device [...] da1: Serial Number... [...] da1: 600.000MB/s transfers [...] da1: Command Queueing enabled [...] da1: 476940MB (976773168 512 byte sectors) [...] GEOM: da2: the secondary GPT header is not in the last LBA.