Log: dmesg
[...] Copyright (c) 668B-5668 The FreeBSD Project.
[...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
[...] The Regents of the University of California. All rights reserved.
[...] FreeBSD is a registered trademark of The FreeBSD Foundation.
[...] FreeBSD 13.1-RELEASE-p6 stable/23.1-n250396-d34cd428508 SMP amd64
[...] FreeBSD clang version 13.0.0 (XXX@XXX:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
[...] VT(vga): resolution 640x480
[...] CPU: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz (1094.40-MHz K8-class CPU)
[...] Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9
[...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[...] Features2=0x4ff8ebb7<SSE3,PCLMULQDQ,DTES64,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
[...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[...] AMD Features2=0x101<LAHF,Prefetch>
[...] Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
[...] Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
[...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[...] IA32_ARCH_CAPS=0x1<RDCL_NO>
[...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[...] TSC: P-state invariant, performance statistics
[...] real memory = 6442450944 (6144 MB)
[...] avail memory = 5982445568 (5705 MB)
[...] Event timer "LAPIC" quality 600
[...] ACPI APIC Table: <INTEL EDK2 >
[...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[...] FreeBSD/SMP: 1 package(s) x 4 core(s)
[...] random: registering fast source Intel Secure Key RNG
[...] random: fast provider: "Intel Secure Key RNG"
[...] random: unblocking device.
[...] ioapic0 <Version 2.0> irqs 0-119
[...] Launching APs: 2 3 1
[...] wlan: mac acl policy registered
[...] random: entropy device external interface
[...] kbd1 at kbdmux0
[...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
[...] smbios0: <System Management BIOS> at iomem 0x79c11000-0x79c1101e
[...] smbios0: Version: 3.0, BCD Revision: 3.0
[...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
[...] acpi0: <ALASKA A M I >
[...] acpi0: Power Button (fixed)
[...] unknown: I/O range not supported
[...] ACPI Error: No handler for Region [ECF2] (0xfffff8000195f180) [EmbeddedControl] (20201113/evregion-290)
[...] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20201113/exfldio-428)
[...] ACPI Error: Aborting method \134_SB.PCI0.SBRG.H_EC.BAT0._STA due to previous error (AE_NOT_EXIST) (20201113/psparse-689)
[...] cpu0: <ACPI CPU> on acpi0
[...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[...] Timecounter "i8254" frequency 1193182 Hz quality 0
[...] Event timer "i8254" frequency 1193182 Hz quality 100
[...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
[...] atrtc0: Warning: Couldn't map I/O.
[...] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[...] Event timer "RTC" frequency 32768 Hz quality 0
[...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
[...] Timecounter "HPET" frequency 19200000 Hz quality 950
[...] Event timer "HPET" frequency 19200000 Hz quality 550
[...] Event timer "HPET1" frequency 19200000 Hz quality 440
[...] Event timer "HPET2" frequency 19200000 Hz quality 440
[...] Event timer "HPET3" frequency 19200000 Hz quality 440
[...] Event timer "HPET4" frequency 19200000 Hz quality 440
[...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[...] acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
[...] acpi_ec0: <Embedded Controller: GPE 0x2c> port 0x62,0x66 on acpi0
[...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[...] pci0: <ACPI PCI bus> on pcib0
[...] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff at device 2.0 on pci0
[...] vgapci0: Boot video device
[...] hdac0: <Intel Broxton-P HDA Controller> mem 0x81418000-0x8141bfff,0x81000000-0x810fffff irq 25 at device 14.0 on pci0
[...] pci0: <simple comms> at device 15.0 (no driver attached)
[...] ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x8141c000-0x8141dfff,0x81422000-0x814220ff,0x81421000-0x814217ff at device 18.0 on pci0
[...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
[...] ahcich0: <AHCI channel> at channel 0 on ahci0
[...] ahcich1: <AHCI channel> at channel 1 on ahci0
[...] pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
[...] pci1: <ACPI PCI bus> on pcib1
[...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x81304000-0x81304fff,0x81300000-0x81303fff at device 0.0 on pci1
[...] re0: Using 1 MSI-X message
[...] re0: turning off MSI enable bit.
[...] re0: ASPM disabled
[...] re0: Chip rev. 0x54000000
[...] re0: MAC rev. 0x00100000
[...] miibus0: <MII bus> on re0
[...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
[...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[...] re0: Using defaults for TSO: 65518/35/2048
[...] re0: Ethernet address: ...
[...] re0: netmap queues/slots: TX 1/256, RX 1/256
[...] pcib2: <ACPI PCI-PCI bridge> at device 19.1 on pci0
[...] pci2: <ACPI PCI bus> on pcib2
[...] re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x81204000-0x81204fff,0x81200000-0x81203fff at device 0.0 on pci2
[...] re1: Using 1 MSI-X message
[...] re1: turning off MSI enable bit.
[...] re1: ASPM disabled
[...] re1: Chip rev. 0x54000000
[...] re1: MAC rev. 0x00100000
[...] miibus1: <MII bus> on re1
[...] rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1
[...] rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[...] re1: Using defaults for TSO: 65518/35/2048
[...] re1: Ethernet address: ...
[...] re1: netmap queues/slots: TX 1/256, RX 1/256
[...] pcib3: <ACPI PCI-PCI bridge> at device 19.2 on pci0
[...] pci3: <ACPI PCI bus> on pcib3
[...] pci3: <network> at device 0.0 (no driver attached)
[...] xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x81400000-0x8140ffff irq 17 at device 21.0 on pci0
[...] xhci0: 32 bytes context size, 64-bit DMA
[...] usbus0 on xhci0
[...] usbus0: 5.0Gbps Super Speed USB v3.0
[...] sdhci_pci0: <Intel Apollo Lake eMMC 5.0 Controller> mem 0x81420000-0x81420fff,0x8141f000-0x8141ffff irq 39 at device 28.0 on pci0
[...] sdhci_pci0: 1 slot(s) allocated
[...] mmc0: <MMC/SD bus> on sdhci_pci0
[...] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...] isa0: <ISA bus> on isab0
[...] acpi_button0: <Power Button> on acpi0
[...] acpi_tz0: <Thermal Zone> on acpi0
[...] acpi_acad0: <AC Adapter> on acpi0
[...] battery0: <ACPI Control Method Battery> on acpi0
[...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[...] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[...] kbd0 at atkbd0
[...] atkbd0: [GIANT-LOCKED]
[...] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[...] Timecounter "TSC" frequency 1094400305 Hz quality 1000
[...] Timecounters tick every 1.000 msec
[...] hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
[...] hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
[...] pcm0: <Realtek ALC269 (Front Analog)> at nid 21 and 24 on hdaa0
[...] hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0
[...] hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1
[...] pcm1: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1
[...] ugen0.1: <Intel XHCI root HUB> at usbus0
[...] uhub0 on usbus0
[...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[...] mmc0: No compatible cards found on bus
[...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[...] ada0: <KINGSTON RBUSNS8180DS3128GH SBFK10D7> ACS-3 ATA SATA 3.x device
[...] ada0: Serial Number...
[...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
[...] ada0: Command Queueing enabled
[...] ada0: 122104MB (250069680 512 byte sectors)
[...] Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
[...] WARNING: /mnt was not properly dismounted
[...] WARNING: /mnt: mount pending error: blocks 80 files 3
[...] uhub0: 15 ports with 15 removable, self powered
[...] ugen0.2: <EATON Ellipse ECO> at usbus0