[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x28 to 0x2f [...] CPU: Intel(R) Core(TM) i5-2550K CPU @ 3.40GHz (3417.97-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8212500480 (7832 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 17 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xf7080000-0xf7083fff irq 18 at device 0.1 on pci2 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7520000-0xf752ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579V> port 0xf040-0xf05f mem 0xf7500000-0xf751ffff,0xf7539000-0xf7539fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7538000-0xf75383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Panther Point HDA Controller> mem 0xf7530000-0xf7533fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xf7404000-0xf7404fff,0xf7400000-0xf7403fff irq 17 at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xf7300000-0xf73001ff irq 19 at device 0.0 on pci5 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] re1: <Realtek PCI GbE Family Controller> port 0xb000-0xb0ff mem 0xf7220000-0xf72200ff irq 16 at device 0.0 on pci7 [...] re1: Using Memory Mapping! [...] re1: Using line-based interrupt [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7100000-0xf7107fff irq 19 at device 0.0 on pci8 [...] xhci1: 32 bytes context size, 32-bit DMA [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7537000-0xf75373ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Panther Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7536000-0xf75367ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> on ahci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1708912240 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen2.1: <(0x1b21) XHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus3 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub2 on usbus2 [...] uhub2: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub3 on usbus1 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0 [...] hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0 [...] hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2 [...] pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2 [...] hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0 [...] hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3 [...] pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3 [...] hdacc4: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa4: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc4 [...] pcm4: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4 [...] pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa4 [...] pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa4 [...] pcm7: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa4 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SV300S37A240G 60AABBF0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub2: 4 ports with 4 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] ugen3.2: <vendor 0x8087 product 0x0024> at usbus3 [...] uhub4 on uhub0 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3 [...] Root mount waiting for: usbus1 usbus3 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] uhub4: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 [...] uhub5: 6 ports with 6 removable, self powered [...] ugen1.3: <Dell Dell USB Keyboard Hub> at usbus1 [...] uhub6 on uhub5 [...] uhub6: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 3> on usbus1 [...] Root mount waiting for: usbus1 [...] uhub6: 3 ports with 2 removable, bus powered [...] ugen1.4: <Dell Dell USB Keyboard Hub> at usbus1 [...] ukbd0 on uhub6 [...] ukbd0: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on usbus1 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] CPU: Intel(R) Core(TM) i5-2550K CPU @ 3.40GHz (3417.82-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7535000-0xf75350ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub6 [...] uhid0: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on usbus1 [...] re0: link state changed to UP [...] re1: link state changed to DOWN [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] re1: link state changed to UP [...] em0: link state changed to UP [...] lagg0: IPv6 addresses on em0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to UP [...] lagg0: IPv6 addresses on re1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] em0: link state changed to DOWN [...] em0: link state changed to UP [...] vlan0: changing name to 'lagg0_vlan20' [...] vlan1: changing name to 'lagg0_vlan30' [...] pid 71078 (ntpd), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] pid 82371 (ntpd), jid 0, uid 0: exited on signal 11 (no core dump - bad address) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 9m4s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x28 to 0x2f [...] CPU: Intel(R) Core(TM) i5-2550K CPU @ 3.40GHz (3418.01-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8212652032 (7832 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 2 1 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 17 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xf7080000-0xf7083fff irq 18 at device 0.1 on pci2 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7520000-0xf752ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579V> port 0xf040-0xf05f mem 0xf7500000-0xf751ffff,0xf7539000-0xf7539fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7538000-0xf75383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Panther Point HDA Controller> mem 0xf7530000-0xf7533fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xf7404000-0xf7404fff,0xf7400000-0xf7403fff irq 17 at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xf7300000-0xf73001ff irq 19 at device 0.0 on pci5 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] re1: <Realtek PCI GbE Family Controller> port 0xb000-0xb0ff mem 0xf7220000-0xf72200ff irq 16 at device 0.0 on pci7 [...] re1: Using Memory Mapping! [...] re1: Using line-based interrupt [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7100000-0xf7107fff irq 19 at device 0.0 on pci8 [...] xhci1: 32 bytes context size, 32-bit DMA [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7537000-0xf75373ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Panther Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7536000-0xf75367ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> on ahci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1708912487 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <(0x1b21) XHCI root HUB> at usbus2 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] uhub0 on usbus2 [...] uhub0: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub2 on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub3 on usbus1 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0 [...] hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0 [...] hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2 [...] pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2 [...] hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0 [...] hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3 [...] pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3 [...] hdacc4: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa4: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc4 [...] pcm4: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4 [...] pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa4 [...] pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa4 [...] pcm7: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa4 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SV300S37A240G 60AABBF0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub1: 8 ports with 8 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] ugen3.2: <vendor 0x8087 product 0x0024> at usbus3 [...] uhub4 on uhub2 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3 [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub5 on uhub3 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] Root mount waiting for: usbus1 usbus3 [...] uhub5: 6 ports with 6 removable, self powered [...] Root mount waiting for:uhub4: 8 ports with 8 removable, self powered [...] usbus1 usbus3 [...] ugen1.3: <Dell Dell USB Keyboard Hub> at usbus1 [...] uhub6 on uhub5 [...] uhub6: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 3> on usbus1 [...] uhub6: 3 ports with 2 removable, bus powered [...] Root mount waiting for: usbus1 [...] ugen1.4: <Dell Dell USB Keyboard Hub> at usbus1 [...] ukbd0 on uhub6 [...] ukbd0: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on usbus1 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] CPU: Intel(R) Core(TM) i5-2550K CPU @ 3.40GHz (3417.82-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] em0: link state changed to UP [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] ichsmb0: <Intel Panther Point SMBus controller> port 0xf000-0xf01f mem 0xf7535000-0xf75350ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] uhid0 on uhub6 [...] uhid0: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on usbus1 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] em0: link state changed to DOWN [...] lagg0: IPv6 addresses on em0 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] lagg0: link state changed to DOWN [...] re1: link state changed to UP [...] lagg0: IPv6 addresses on re1 have been removed before adding it as a member to prevent IPv6 address scope violation. [...] em0: link state changed to UP [...] em0: link state changed to DOWN [...] lagg0: link state changed to UP [...] em0: link state changed to UP [...] vlan0: changing name to 'lagg0_vlan20' [...] vlan1: changing name to 'lagg0_vlan30' [...] re0: link state changed to UP [...] lagg0: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] vlan0: changing name to 'lagg0_vlan20' [...] lagg0: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] pid 90708 (php-cgi), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] pid 99593 (php-cgi), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] pid 23 (php-cgi), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] lagg0_vlan30: link state changed to UP [...] vlan1: changing name to 'lagg0_vlan30' [...] pid 661 (php-cgi), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] pid 60794 (php-cgi), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] lagg0: link state changed to DOWN [...] lagg0_vlan20: link state changed to DOWN [...] lagg0_vlan30: link state changed to DOWN [...] vlan0: changing name to 'lagg0_vlan20' [...] vlan1: changing name to 'lagg0_vlan30' [...] lagg0: link state changed to UP [...] lagg0_vlan20: link state changed to UP [...] lagg0_vlan30: link state changed to UP [...] pid 76728 (php-cgi), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] pid 93371 (php-cgi), jid 0, uid 0: exited on signal 10 (no core dump - bad address) [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] [...] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 19m31s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.1-RELEASE-p6 stable/24.7-n267981-8375762712f SMP amd64 [...] FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) [...] VT(vga): resolution 640x480 [...] CPU microcode: updated from 0x28 to 0x2f [...] CPU: Intel(R) Core(TM) i5-2550K CPU @ 3.40GHz (3417.95-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x1<LAHF> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8212668416 (7832 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <ALASKA A M I> [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de [...] smbios0: Version: 2.7, BCD Revision: 2.7 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <ALASKA A M I> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 550 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Event timer "HPET4" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 17 at device 0.0 on pci2 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xf7080000-0xf7083fff irq 18 at device 0.1 on pci2 [...] xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7520000-0xf752ffff irq 16 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] xhci0: Port routing mask set to 0xffffffff [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] em0: <Intel(R) 82579V> port 0xf040-0xf05f mem 0xf7500000-0xf751ffff,0xf7539000-0xf7539fff irq 20 at device 25.0 on pci0 [...] em0: EEPROM V0.13-4 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7538000-0xf75383ff irq 16 at device 26.0 on pci0 [...] usbus1: EHCI version 1.0 [...] usbus1 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel Panther Point HDA Controller> mem 0xf7530000-0xf7533fff irq 22 at device 27.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] re0: <Realtek PCIe GbE Family Controller> port 0xd000-0xd0ff mem 0xf7404000-0xf7404fff,0xf7400000-0xf7403fff irq 17 at device 0.0 on pci4 [...] re0: Using Memory Mapping! [...] re0: Using 1 MSI-X message [...] re0: version:1.100.00 [...] re0: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xf7300000-0xf73001ff irq 19 at device 0.0 on pci5 [...] ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported [...] ahci0: quirks=0xc00000<NOCCS,NOAUX> [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib6 [...] pcib7: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci6 [...] pci7: <ACPI PCI bus> on pcib7 [...] re1: <Realtek PCI GbE Family Controller> port 0xb000-0xb0ff mem 0xf7220000-0xf72200ff irq 16 at device 0.0 on pci7 [...] re1: Using Memory Mapping! [...] re1: Using line-based interrupt [...] re1: version:1.100.00 [...] re1: Ethernet address: ... [...] [...] This product is covered by one or more of the following patents: [...] US6,570,884, US6,115,776, and US6,327,625. [...] re1: Ethernet address: ... [...] pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 [...] pci8: <ACPI PCI bus> on pcib8 [...] xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7100000-0xf7107fff irq 19 at device 0.0 on pci8 [...] xhci1: 32 bytes context size, 32-bit DMA [...] usbus2 on xhci1 [...] usbus2: 5.0Gbps Super Speed USB v3.0 [...] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7537000-0xf75373ff irq 23 at device 29.0 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci1 [...] usbus3: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci1: <Intel Panther Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7536000-0xf75367ff irq 19 at device 31.2 on pci0 [...] ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported [...] ahciem0: <AHCI enclosure management bridge> on ahci1 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 [...] uart0: console (115200,n,8,1) [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1708912366 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen2.1: <(0x1b21) XHCI root HUB> at usbus2 [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] uhub0 on usbus2 [...] uhub0: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 [...] uhub1 on usbus1 [...] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] uhub2 on usbus3 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub3 on usbus0 [...] uhub3: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0 [...] hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1 [...] pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0 [...] hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2 [...] pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2 [...] hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0 [...] hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3 [...] pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3 [...] hdacc4: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 [...] hdaa4: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc4 [...] pcm4: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4 [...] pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa4 [...] pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa4 [...] pcm7: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa4 [...] ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SV300S37A240G 60AABBF0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 4 ports with 4 removable, self powered [...] uhub3: 8 ports with 8 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 [...] uhub4 on uhub1 [...] uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 [...] ugen3.2: <vendor 0x8087 product 0x0024> at usbus3 [...] uhub5 on uhub2 [...] uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3 [...] Root mount waiting for: usbus1 usbus3 [...] uhub4: 6 ports with 6 removable, self powered [...] uhub5: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus1 usbus3 [...] ugen1.3: <Dell Dell USB Keyboard Hub> at usbus1 [...] uhub6 on uhub4 [...] uhub6: <Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 3> on usbus1 [...] uhub6: 3 ports with 2 removable, bus powered [...] Root mount waiting for: usbus1 [...] ugen1.4: <Dell Dell USB Keyboard Hub> at usbus1 [...] ukbd0 on uhub6 [...] ukbd0: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on usbus1 [...] kbd2 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary