[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p1 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1366x768 [...] CPU: Intel(R) Celeron(R) CPU N3060 @ 1.60GHz (1600.16-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406c4 Family=0x6 Model=0x4c Stepping=4 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> [...] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> [...] AMD Features2=0x101<LAHF,Prefetch> [...] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3971416064 (3787 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 8320 > [...] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-114 [...] Launching APs: 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x7a63e000-0x7a63e01e [...] smbios0: Version: 3.0, BCD Revision: 3.0 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <HPQOEM SLIC-MPC> [...] acpi0: Power Button (fixed) [...] unknown: I/O range not supported [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] ahci0: <AHCI SATA controller> port 0x2060-0x207f mem 0x91415000-0x914157ff irq 19 at device 19.0 on pci0 [...] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <encrypt/decrypt> at device 26.0 (no driver attached) [...] hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0x91104000-0x91104fff,0x91100000-0x91103fff irq 16 at device 0.0 on pci1 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] pci2: <network> at device 0.0 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. [...] psm0: model Elantech Touchpad, device ID 0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC" frequency 1599948148 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <Realtek ALC282 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC282 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC282 (Analog)> at nid 20 and 25 on hdaa0 [...] pcm1: <Realtek ALC282 (Analog)> at nid 33 and 18 on hdaa0 [...] hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Braswell (HDMI/DP 8ch)> at nid 5 on hdaa1 [...] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [...] ada0: <WDC WD5000LPCX-60VHAT0 01.01A01> ACS-3 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 476940MB (976773168 512 byte sectors) [...] ada0: quirks=0x1<4K> [...] cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 [...] cd0: <hp DVDRW GUE1N UE00> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 13 ports with 13 removable, self powered [...] acpi_ec0: EcCommand: no response to 0x84 [...] ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 [...] uhub1 on uhub0 [...] uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 [...] Root mount waiting for: usbus0 [...] acpi_ec0: EcCommand: no response to 0x84 [...] acpi_ec0: GPE query failed: AE_NO_HARDWARE_RESPONSE [...] uhub1: 4 ports with 0 removable, self powered [...] ugen0.3: <vendor 0x8087 product 0x0aa7> at usbus0 [...] Root mount waiting for: usbus0 [...] ugen0.4: <Chicony Electronics Co.,Ltd. HP TrueVision HD Camera> at usbus0 [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] ichsmb0: <Intel Braswell SMBus controller> port 0x2040-0x205f mem 0x91416000-0x9141601f irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] iwm0: <Intel(R) Dual Band Wireless AC 3168> mem 0x91000000-0x91001fff irq 19 at device 0.0 on pci2 [...] iwm0: hw rev 0x220, fw ver 22.361476.0, address XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20221020/exsystem-307) [...] wlan0: Ethernet address: ... [...] re0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20221020/exsystem-307) [...] ugen0.3: <vendor 0x8087 product 0x0aa7> at usbus0 (disconnected) [...] ugen0.3: <vendor 0x8087 product 0x0aa7> at usbus0 [...] ng_ubt: HCI command 0x0c03 timed out [...] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20221020/exsystem-307) [...] ng_ubt: HCI command 0x0c03 timed out [...] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20221020/exsystem-307)