[...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xe1220000-0xe122ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xe1248000-0xe1249fff,0xe124e000-0xe124e0ff,0xe124c000-0xe124c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <unknown> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe1000000-0xe1001fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xe1240000-0xe1243fff,0xe1230000-0xe123ffff at device 31.3 on pci0 [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xe1200000-0xe121ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 [...] acpi_ibm0: Firmware version is 0x100 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] iwm0: hw rev 0x200, fw ver 22.361476.0, address XXX [...] hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC293 (Analog)> at nid 20 and 26 on hdaa0 [...] pcm1: <Realtek ALC293 (Analog)> at nid 21 and 18 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/12.2-RC1 []... [...] Root mount waiting for: CAM [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <OCZ-TRION150 SAFZ12.2> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] uhub0: 18 ports with 18 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] device_attach: drmn0 attach returned 19 [...] rtsx0: <1.0h Realtek RTS522A PCI MMC/SD Card Reader> mem 0xe1100000-0xe1100fff at device 0.0 on pci1 [...] rtsx0: card_drive_sel: 0x41, sd30_drive_sel_3v3: 0x03, reverse_socket is false [...] rtsx0: rtsx_init() rtsx_flags: 0x0002 [...] rtsx0: Card absent [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] lagg0: link state changed to DOWN [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 1m42s [...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p9 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (2496.13-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406e3 Family=0x6 Model=0x4e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8131002368 (7754 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-R06 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1248065091 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TP-R06> on motherboard [...] acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xe0000000-0xe0ffffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xe1220000-0xe122ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xe1248000-0xe1249fff,0xe124e000-0xe124e0ff,0xe124c000-0xe124c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <unknown> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe1000000-0xe1001fff at device 0.0 on pci2 [...] iwm0: could not read firmware iwm8000Cfw (error 0) [...] device_attach: iwm0 attach returned 6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xe1240000-0xe1243fff,0xe1230000-0xe123ffff at device 31.3 on pci0 [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xe1200000-0xe121ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model IBM/Lenovo TrackPoint, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 [...] acpi_ibm0: Firmware version is 0x100 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC293 (Analog)> at nid 20 and 26 on hdaa0 [...] pcm1: <Realtek ALC293 (Analog)> at nid 21 and 18 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <OCZ-TRION150 SAFZ12.2> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/12.1p9 []... [...] uhub0: 18 ports with 18 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xc0000000-0xdfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xba800000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] rtsx0: <1.0h Realtek RTS522A PCI MMC/SD Card Reader> mem 0xe1100000-0xe1100fff at device 0.0 on pci1 [...] rtsx0: card_drive_sel: 0x41, sd30_drive_sel_3v3: 0x03, reverse_socket is false [...] rtsx0: rtsx_init() rtsx_flags: 0x0002 [...] rtsx0: Card absent [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0040000 vbase=0xfffff800c0040000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe1000000-0xe1001fff at device 0.0 on pci2 [...] iwm0: hw rev 0x200, fw ver 22.361476.0, address XXX [...] drmn0: successfully loaded firmware image with name: i915/skl_dmc_ver1_27.bin [...] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: ieee80211_new_state_locked: pending ASSOC -> AUTH transition lost [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdac0: Command timeout on address 2 [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lagg0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] hdac0: Command timeout on address 2 [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] rtsx0: Suspend [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] rtsx0: Resume [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] Limiting closed port RST response from 556 to 200 packets/sec [...] em0: link state changed to UP [...] wlan0: link state changed to DOWN [...] wlan0: link state changed to UP [...] em0: link state changed to DOWN [...] hdac0: Command timeout on address 2 [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] rtsx0: Suspend [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] rtsx0: Resume [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] Uptime: 53m28s [...] ---<<BOOT>>--- [...] Copyright (c) 7B0E-C7D4 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.1-RELEASE-p9 GENERIC amd64 [...] FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (2496.12-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406e3 Family=0x6 Model=0x4e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8128884736 (7752 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-R06 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1248057621 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4335] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TP-R06> on motherboard [...] acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xe0000000-0xe0ffffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xe1220000-0xe122ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xe1248000-0xe1249fff,0xe124e000-0xe124e0ff,0xe124c000-0xe124c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <unknown> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe1000000-0xe1001fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xe1240000-0xe1243fff,0xe1230000-0xe123ffff at device 31.3 on pci0 [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xe1200000-0xe121ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model IBM/Lenovo TrackPoint, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 [...] acpi_ibm0: Firmware version is 0x100 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] iwm0: hw rev 0x200, fw ver 22.361476.0, address XXX [...] hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC293 (Analog)> at nid 20 and 26 on hdaa0 [...] pcm1: <Realtek ALC293 (Analog)> at nid 21 and 18 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <OCZ-TRION150 SAFZ12.2> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/12.1p9 []... [...] uhub0: 18 ports with 18 removable, self powered [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xc0000000-0xdfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xba800000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] rtsx0: <1.0h Realtek RTS522A PCI MMC/SD Card Reader> mem 0xe1100000-0xe1100fff at device 0.0 on pci1 [...] rtsx0: card_drive_sel: 0x41, sd30_drive_sel_3v3: 0x03, reverse_socket is false [...] rtsx0: rtsx_init() rtsx_flags: 0x0002 [...] rtsx0: Card absent [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0040000 vbase=0xfffff800c0040000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] drmn0: successfully loaded firmware image with name: i915/skl_dmc_ver1_27.bin [...] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdac0: Command timeout on address 2 [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] iwm0: device timeout [...] iwm0: dumping device error log [...] iwm0: errlog not found, skipping [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lagg0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] pid 54316 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 51040 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 23905 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 91517 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 37469 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 28002 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 99979 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 78180 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 49164 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 16064 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 56539 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 5672 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 47276 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 49972 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 684 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 53961 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] pid 85579 (ioctl), jid 0, uid 1001: exited on signal 11 (core dumped) [...] hdac0: Command timeout on address 2 [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] rtsx0: Suspend [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] rtsx0: Resume [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] hdac0: Command timeout on address 2 [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] rtsx0: Suspend [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] rtsx0: Resume [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] hdac0: Command timeout on address 2 [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] rtsx0: Suspend [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] rtsx0: Resume [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lagg0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lagg0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] pid 85512 (nextcloud), jid 0, uid 1001: exited on signal 11 (core dumped) [...] hdac0: Command timeout on address 2 [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] rtsx0: Suspend [...] uhub0: at usbus0, port 1, addr 1 (disconnected) [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 (disconnected) [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 (disconnected) [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 (disconnected) [...] vgapci0: child drmn0 requested pci_set_powerstate [...] pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER [...] acpi0: cleared fixed power button status [...] vgapci0: child drmn0 requested pci_set_powerstate [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] rtsx0: Resume [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] hdac0: Command timeout on address 2 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] All buffers synced. [...] Uptime: 12h25m1s [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-BETA1 #11 r365688: Sun Sep 13 17:05:01 CEST 2020 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (2496.09-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406e3 Family=0x6 Model=0x4e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8128049152 (7751 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-R06 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 3 2 [...] Timecounter "TSC-low" frequency 1248042690 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8110ee40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TP-R06> on motherboard [...] acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xe0000000-0xe0ffffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xe1220000-0xe122ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xe1248000-0xe1249fff,0xe124e000-0xe124e0ff,0xe124c000-0xe124c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <unknown> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe1000000-0xe1001fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xe1240000-0xe1243fff,0xe1230000-0xe123ffff at device 31.3 on pci0 [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xe1200000-0xe121ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 [...] acpi_ibm0: Firmware version is 0x100 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] iwm0: hw rev 0x200, fw ver 22.361476.0, address XXX [...] hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC293 (Analog)> at nid 20 and 26 on hdaa0 [...] pcm1: <Realtek ALC293 (Analog)> at nid 21 and 18 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/12.2-BETA1 []... [...] Root mount waiting for: CAM [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <OCZ-TRION150 SAFZ12.2> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0 [...] ugen0.4: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.5: <SunplusIT Inc Integrated Camera> at usbus0 [...] ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0 (disconnected) [...] drmn0: <drmn> on vgapci0 [...] device_attach: drmn0 attach returned 19 [...] rtsx0: <1.0h Realtek RTS522A PCI MMC/SD Card Reader> mem 0xe1100000-0xe1100fff at device 0.0 on pci1 [...] rtsx0: card_drive_sel: 0x41, sd30_drive_sel_3v3: 0x03, reverse_socket is false [...] rtsx0: rtsx_init() rtsx_flags: 0x0002 [...] rtsx0: Card absent [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lagg0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done [...] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done [...] All buffers synced. [...] Uptime: 3m16s [...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-BETA1 #11 r365688: Sun Sep 13 17:05:01 CEST 2020 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(efifb): resolution 1920x1080 [...] CPU: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (2496.10-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406e3 Family=0x6 Model=0x4e Stepping=3 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID [...] TSC: P-state invariant, performance statistics [...] real memory = 8589934592 (8192 MB) [...] avail memory = 8128049152 (7751 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <LENOVO TP-R06 > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 on motherboard [...] Launching APs: 1 2 3 [...] Timecounter "TSC-low" frequency 1248049100 Hz quality 1000 [...] Cuse v0.1.36 @ /dev/cuse [...] random: entropy device external interface [...] 000.000020 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff8110ee40, 0) error 19 [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] kbd1 at kbdmux0 [...] nexus0 [...] efirtc0: <EFI Realtime Clock> on motherboard [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] cryptosoft0: <software crypto> on motherboard [...] acpi0: <LENOVO TP-R06> on motherboard [...] acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 24000000 Hz quality 950 [...] Event timer "HPET" frequency 24000000 Hz quality 550 [...] Event timer "HPET1" frequency 24000000 Hz quality 440 [...] Event timer "HPET2" frequency 24000000 Hz quality 440 [...] Event timer "HPET3" frequency 24000000 Hz quality 440 [...] Event timer "HPET4" frequency 24000000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xe0000000-0xe0ffffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xe1220000-0xe122ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xe1248000-0xe1249fff,0xe124e000-0xe124e0ff,0xe124c000-0xe124c7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <unknown> at device 0.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe1000000-0xe1001fff at device 0.0 on pci2 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <memory> at device 31.2 (no driver attached) [...] hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xe1240000-0xe1243fff,0xe1230000-0xe123ffff at device 31.3 on pci0 [...] em0: <Intel(R) PRO/1000 Network Connection> mem 0xe1200000-0xe121ffff at device 31.6 on pci0 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] battery1: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 [...] acpi_ibm0: Firmware version is 0x100 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 [...] coretemp0: <CPU On-Die Thermal Sensors> on cpu0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [...] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] iwm0: hw rev 0x200, fw ver 22.361476.0, address XXX [...] hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Realtek ALC293 (Analog)> at nid 20 and 26 on hdaa0 [...] pcm1: <Realtek ALC293 (Analog)> at nid 21 and 18 on hdaa0 [...] hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 [...] hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 [...] pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 [...] Trying to mount root from zfs:zroot/ROOT/12.2-BETA1 []... [...] Root mount waiting for: CAM [...] ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 [...] ada0: <OCZ-TRION150 SAFZ12.2> ACS-2 ATA SATA 3.x device [...] ada0: Serial Number... [...] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] uhub0: 18 ports with 18 removable, self powered [...] ugen0.2: <Generic EMV Smartcard Reader> at usbus0 [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [...] Failed to add WC MTRR for [0xc0000000-0xdfffffff]: -22; performance may suffer [...] [drm] Got stolen memory base 0xba800000, size 0x2000000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] [drm] Connector eDP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.eDP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DP-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DP-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector HDMI-A-2: get mode from tunables: [...] [drm] - kern.vt.fb.modes.HDMI-A-2 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 [...] VT: Replacing driver "efifb" with new "fb". [...] start FB_INFO: [...] type=11 height=1080 width=1920 depth=32 [...] cmsize=16 size=8294400 [...] pbase=0xc0040000 vbase=0xfffff800c0040000 [...] name=drmn0 flags=0x0 stride=7680 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: inteldrmfb frame buffer device [...] rtsx0: <1.0h Realtek RTS522A PCI MMC/SD Card Reader> mem 0xe1100000-0xe1100fff at device 0.0 on pci1 [...] rtsx0: card_drive_sel: 0x41, sd30_drive_sel_3v3: 0x03, reverse_socket is false [...] rtsx0: rtsx_init() rtsx_flags: 0x0002 [...] rtsx0: Card absent [...] drmn0: successfully loaded firmware image with name: i915/skl_dmc_ver1_27.bin [...] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] ugen0.3: <vendor 0x138a product 0x0017> at usbus0 [...] ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdac0: Command 0x2033b000 timeout on address 2 [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] hdacc1: Unexpected unsolicited response with tag 63: ffffffff [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] wlan0: link state changed to DOWN [...] lagg0: link state changed to DOWN [...] in6_purgeaddr: err=65, destination address delete failed [...] lo0: link state changed to DOWN [...] wlan0: Ethernet address: ... [...] lagg0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] lagg0: link state changed to UP [...] pid 85541 (nvim), jid 0, uid 1001: exited on signal 10 (core dumped) [...] pid 47209 (nvim), jid 0, uid 1001: exited on signal 10 (core dumped) [...] pid 6688 (nvim), jid 0, uid 1001: exited on signal 10 (core dumped) [...] pid 60446 (nvim), jid 0, uid 1001: exited on signal 10 (core dumped)