[...] ---<<BOOT>>--- [...] Copyright (c) 04B8-B51F The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 12.2-RELEASE-p4 GENERIC amd64 [...] FreeBSD clang version 10.0.1 (XXX@XXX:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) [...] VT(vga): resolution 640x480 [...] module wpi already present! [...] CPU: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz (2161.30-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 3081998336 (2939 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <LENOVO TP-79 > [...] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs [...] FreeBSD/SMP: 1 package(s) x 2 core(s) [...] random: unblocking device. [...] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20200430/tbfadt-748) [...] Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20200430/tbfadt-796) [...] ioapic0: MADT APIC ID 1 != hw id 2 [...] ioapic0 <Version 2.0> irqs 0-23 on motherboard [...] Launching APs: 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] 000.000023 [4336] netmap_init netmap: loaded module [...] [ath_hal] loaded [...] module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 [...] nexus0 [...] vtvga0: <VT VGA driver> on motherboard [...] cryptosoft0: <software crypto> on motherboard [...] aesni0: No AES or SHA support. [...] acpi0: <LENOVO TP-79> on motherboard [...] CPU0: local APIC error 0x40 [...] CPU1: local APIC error 0x40 [...] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_button0: <Sleep Button> on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd8000000-0xdfffffff,0xee100000-0xee10ffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <Intel 82801G HDA Controller> mem 0xee400000-0xee403fff irq 17 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 [...] pcib2: [GIANT-LOCKED] [...] pci2: <ACPI PCI bus> on pcib2 [...] em0: <Intel(R) PRO/1000 Network Connection> port 0x3000-0x301f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2 [...] em0: Using 1024 TX descriptors and 1024 RX descriptors [...] em0: Using an MSI interrupt [...] em0: Ethernet address: ... [...] em0: netmap queues/slots: TX 1/1024, RX 1/1024 [...] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 [...] pcib3: [GIANT-LOCKED] [...] pci3: <ACPI PCI bus> on pcib3 [...] wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xedf00000-0xedf00fff irq 17 at device 0.0 on pci3 [...] pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 [...] pcib4: [GIANT-LOCKED] [...] pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 [...] pcib5: [GIANT-LOCKED] [...] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x1800-0x181f irq 16 at device 29.0 on pci0 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x1820-0x183f irq 17 at device 29.1 on pci0 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x1860-0x187f irq 19 at device 29.3 on pci0 [...] usbus3 on uhci3 [...] usbus3: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xee404000-0xee4043ff irq 19 at device 29.7 on pci0 [...] usbus4: EHCI version 1.0 [...] usbus4 on ehci0 [...] usbus4: 480Mbps High Speed USB v2.0 [...] pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib6 [...] cbb0: <TI1510 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at device 0.0 on pci4 [...] cardbus0: <CardBus bus> on cbb0 [...] pccard0: <16-bit PCCard bus> on cbb0 [...] pccard0: Deprecated code (to be removed in FreeBSD 13): PC Card to be removed. [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0 [...] ata0: <ATA channel> at channel 0 on atapci0 [...] ahci0: <Intel ICH7M AHCI SATA controller> port 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf mem 0xee404400-0xee4047ff irq 16 at device 31.2 on pci0 [...] ahci0: AHCI v1.10 with 4 1.5Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] psm0: <PS/2 Mouse> irq 12 on atkbdc0 [...] psm0: [GIANT-LOCKED] [...] psm0: model Synaptics Touchpad, device ID 0 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 drq 3 on acpi0 [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; [...] to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] Timecounters tick every 1.000 msec [...] hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <Analog Devices AD1981HD Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <Analog Devices AD1981HD (Analog)> at nid 5 and 8,25 on hdaa0 [...] pcm1: <Analog Devices AD1981HD (Rear Digital)> at nid 10 on hdaa0 [...] hdacc1: <Conexant (0x2bfa) HDA CODEC> at cad 1 on hdac0 [...] unknown: <Conexant (0x2bfa) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) [...] ugen3.1: <Intel UHCI root HUB> at usbus3 [...] uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen4.1: <Intel EHCI root HUB> at usbus4 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 cbb0 CAM [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <OWC Mercury Electra 6G SSD 506ABBF0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 228936MB (468862128 512 byte sectors) [...] cd0 at ata0 bus 0 scbus0 target 0 lun 0 [...] cd0: <HL-DT-ST DVDRAM GSA-U10N 1.05> Removable CD-ROM SCSI device [...] cd0: Serial Number... [...] cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) [...] cd0: Attempt to query device size failed: NOT READY, Medium not present [...] GEOM_ELI: Device ada0p3.eli created. [...] GEOM_ELI: Encryption: AES-XTS 256 [...] GEOM_ELI: Crypto: software [...] uhub0: 2 ports with 2 removable, self powered [...] uhub3: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] uhub2: 8 ports with 8 removable, self powered [...] Root mount waiting for: usbus4 [...] Root mount waiting for: usbus4 [...] ugen3.2: <Broadcom Corp BCM2045B> at usbus3 [...] [drm] radeon kernel modesetting enabled. [...] drmn0: <drmn> on vgapci0 [...] vgapci0: child drmn0 requested pci_enable_io [...] vgapci0: child drmn0 requested pci_enable_io [...] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x17AA:0x2006 0x00). [...] [drm:radeon_device_init] Unable to find PCI I/O BAR [...] [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO [...] ATOM BIOS: M64CSP/M62CSP/M54CSP/M52CSP [...] [drm] Generation 2 PCI interface, using max accessible memory [...] drmn0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used) [...] drmn0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF [...] Successfully added WC MTRR for [0xd8000000-0xdfffffff]: 0; [...] [drm] Detected VRAM RAM=128M, BAR=128M [...] [drm] RAM width 128bits DDR [...] [TTM] Zone kernel: Available graphics memory: 1551030 kiB [...] [TTM] Initializing pool allocator [...] [drm] radeon: 128M of VRAM memory ready [...] [drm] radeon: 512M of GTT memory ready. [...] [drm] GART: num cpu pages 131072, num gpu pages 131072 [...] [drm] radeon: power management initialized [...] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [...] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [...] drmn0: WB enabled [...] drmn0: fence driver on ring 0 use gpu addr 0x0000000008000000 and cpu addr 0x0xfffff80014498000 [...] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [...] [drm] Driver supports precise vblank timestamp query. [...] drmn0: radeon: MSI limited to 32-bit [...] [drm] radeon: irq initialized. [...] [drm] Loading R500 Microcode [...] ugen3.3: <STMicroelectronics Biometric Coprocessor> at usbus3 [...] radeon/R520_cp.bin: could not load firmware image, error 2 [...] drmn0: fail (0) to get firmware image with name: radeon/R520_cp.bin [...] drmn0: successfully loaded firmware image with mapped name: radeon_R520_cp_bin [...] [drm] radeon: ring at 0x0000000008001000 [...] [drm] ring test succeeded in 4 usecs [...] [drm] ib test succeeded in 0 usecs [...] [drm] Connector VGA-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.VGA-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector LVDS-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.LVDS-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Connector DVI-I-1: get mode from tunables: [...] [drm] - kern.vt.fb.modes.DVI-I-1 [...] [drm] - kern.vt.fb.default_mode [...] [drm] Radeon Display Connectors [...] [drm] Connector 0: [...] [drm] VGA-1 [...] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [...] [drm] Encoders: [...] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [...] [drm] Connector 1: [...] [drm] LVDS-1 [...] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [...] [drm] Encoders: [...] [drm] LCD1: INTERNAL_LVTM1 [...] [drm] Connector 2: [...] [drm] DVI-I-1 [...] [drm] HPD1 [...] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [...] [drm] Encoders: [...] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [...] [drm] fb mappable at 0xD80C0000 [...] [drm] vram apper at 0xD8000000 [...] [drm] size 5914624 [...] [drm] fb depth is 24 [...] [drm] pitch is 5632 [...] VT: Replacing driver "vga" with new "fb". [...] start FB_INFO: [...] type=11 height=1050 width=1400 depth=32 [...] cmsize=16 size=5914624 [...] pbase=0xd80c0000 vbase=0xfffff800d80c0000 [...] name=drmn0 flags=0x0 stride=5632 bpp=32 [...] cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 [...] end FB_INFO [...] drmn0: fb0: radeondrmfb frame buffer device [...] [drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0 [...] wlan0: Ethernet address: ... [...] lo0: link state changed to UP [...] em0: link state changed to UP [...] wlan0: link state changed to UP [...] ubt0 on uhub0 [...] ubt0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on usbus3 [...] WARNING: attempt to domain_add(bluetooth) after domainfinalize() [...] WARNING: attempt to domain_add(netgraph) after domainfinalize() [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ugen4.2: <JMicron Go To Final Lap> at usbus4 [...] umass0 on uhub2 [...] umass0: <JMicron Go To Final Lap, class 0/0, rev 2.10/1.02, addr 2> on usbus4 [...] umass0: SCSI over Bulk-Only; quirks = 0x8100 [...] umass0:2:0: Attached to scbus2 [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Jmicron 0102> Fixed Direct Access SPC-4 SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 61057MB (125045424 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] ugen4.2: <JMicron Go To Final Lap> at usbus4 (disconnected) [...] umass0: at uhub2, port 5, addr 2 (disconnected) [...] da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 [...] da0: <Jmicron 0102> s/n ... detached [...] (da0:umass-sim0:0:0:0): Periph destroyed [...] umass0: detached