[...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <COREv4 COREBOOT> [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x1000-0x103f mem 0x81000000-0x81ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x82200000-0x8220ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x82210000-0x8221ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x1060-0x1067,0x1068-0x106b,0x1040-0x105f mem 0x82224000-0x82225fff,0x8222c000-0x8222c0ff,0x8222b000-0x8222b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x82229000-0x82229fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80600000-0x80603fff at device 0.0 on pci1 [...] igc0: EEPROM V2.17-0 eTrack 0x80000303 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80700000-0x807fffff,0x80900000-0x80903fff at device 0.0 on pci2 [...] igc1: EEPROM V2.17-0 eTrack 0x80000303 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80a00000-0x80afffff,0x80c00000-0x80c03fff at device 0.0 on pci3 [...] igc2: EEPROM V2.17-0 eTrack 0x80000303 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80d00000-0x80dfffff,0x80f00000-0x80f03fff at device 0.0 on pci4 [...] igc3: EEPROM V2.17-0 eTrack 0x80000303 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme0: <Generic NVMe Device> mem 0x82000000-0x82003fff at device 0.0 on pci5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x82220000-0x82223fff,0x82100000-0x821fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 806401677 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 06/2021 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] nvme0: Allocated 64MB host memory buffer [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <KINGSTON SNV3S500G SDQ00103 50026B728354C867> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 3 ports with 3 removable, self powered [...] uhub1: 16 ports with 16 removable, self powered [...] ugen1.2: <SONiX USB DEVICE> at usbus1 [...] ukbd0 on uhub1 [...] ukbd0: <SONiX USB DEVICE, class 0/0, rev 2.00/1.35, addr 1> on usbus1 [...] kbd1 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] pid 33 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1m4s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE stable/25.1-n269614-36155813721 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 3840x2160 [...] CPU microcode: no matching update found [...] CPU: Intel(R) N150 (806.40-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34358689792 (32767 MB) [...] avail memory = 33147879424 (31612 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <COREv4 COREBOOT> [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 3 2 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x76135000-0x7613501e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <COREv4 COREBOOT> [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x1000-0x103f mem 0x81000000-0x81ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x82200000-0x8220ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x82210000-0x8221ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x1060-0x1067,0x1068-0x106b,0x1040-0x105f mem 0x82224000-0x82225fff,0x8222c000-0x8222c0ff,0x8222b000-0x8222b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x82229000-0x82229fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80600000-0x80603fff at device 0.0 on pci1 [...] igc0: EEPROM V2.17-0 eTrack 0x80000303 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80700000-0x807fffff,0x80900000-0x80903fff at device 0.0 on pci2 [...] igc1: EEPROM V2.17-0 eTrack 0x80000303 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80a00000-0x80afffff,0x80c00000-0x80c03fff at device 0.0 on pci3 [...] igc2: EEPROM V2.17-0 eTrack 0x80000303 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80d00000-0x80dfffff,0x80f00000-0x80f03fff at device 0.0 on pci4 [...] igc3: EEPROM V2.17-0 eTrack 0x80000303 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme0: <Generic NVMe Device> mem 0x82000000-0x82003fff at device 0.0 on pci5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x82220000-0x82223fff,0x82100000-0x821fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 806401680 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 06/2021 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] nvme0: Allocated 64MB host memory buffer [...] uhub1: 3 ports with 3 removable, self powered [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <KINGSTON SNV3S500G SDQ00103 50026B728354C867> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.2: <SONiX USB DEVICE> at usbus1 [...] ukbd0 on uhub0 [...] ukbd0: <SONiX USB DEVICE, class 0/0, rev 2.00/1.35, addr 1> on usbus1 [...] kbd1 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] pid 33 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] igc0: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-0> mem 0x82226000-0x82226fff at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Alder Lake-M I2C Controller-4> mem 0x82228000-0x82228fff at device 25.0 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x23 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x8222d000-0x8222d0ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub0 [...] ums0: <SONiX USB DEVICE, class 0/0, rev 2.00/1.35, addr 1> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=6 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igc0: link state changed to DOWN [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 14h0m11s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269769-0381600e81a4 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 3840x2160 [...] CPU microcode: updated from 0x1c to 0x1d [...] CPU: Intel(R) N150 (806.40-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x15c0fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34358689792 (32767 MB) [...] avail memory = 33145782272 (31610 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <COREv4 COREBOOT> [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 2 3 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x76135000-0x7613501e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <COREv4 COREBOOT> [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x1000-0x103f mem 0x81000000-0x81ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x82200000-0x8220ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x82210000-0x8221ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x1060-0x1067,0x1068-0x106b,0x1040-0x105f mem 0x82224000-0x82225fff,0x8222c000-0x8222c0ff,0x8222b000-0x8222b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x82229000-0x82229fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80600000-0x80603fff at device 0.0 on pci1 [...] igc0: EEPROM V2.17-0 eTrack 0x80000303 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80700000-0x807fffff,0x80900000-0x80903fff at device 0.0 on pci2 [...] igc1: EEPROM V2.17-0 eTrack 0x80000303 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80a00000-0x80afffff,0x80c00000-0x80c03fff at device 0.0 on pci3 [...] igc2: EEPROM V2.17-0 eTrack 0x80000303 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80d00000-0x80dfffff,0x80f00000-0x80f03fff at device 0.0 on pci4 [...] igc3: EEPROM V2.17-0 eTrack 0x80000303 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme0: <Generic NVMe Device> mem 0x82000000-0x82003fff at device 0.0 on pci5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x82220000-0x82223fff,0x82100000-0x821fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 806401661 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] uhub0 on usbus0 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] ZFS filesystem version: 5 [...] uhub1 on usbus1 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ZFS storage pool version: features support (5000) [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 06/2021 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] uhub0: 3 ports with 3 removable, self powered [...] nvme0: Allocated 64MB host memory buffer [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <KINGSTON SNV3S500G SDQ00103 50026B728354C867> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 16 ports with 16 removable, self powered [...] Root mount waiting for: usbus1 [...] ugen1.2: <SONiX USB DEVICE> at usbus1 [...] ukbd0 on uhub1 [...] ukbd0: <SONiX USB DEVICE, class 0/0, rev 2.00/1.35, addr 1> on usbus1 [...] kbd1 at ukbd0 [...] Dual Console: Serial Primary, Video Secondary [...] pid 33 (zpool) is attempting to use unsafe AIO requests - not logging anymore [...] igc0: link state changed to UP [...] igc1: link state changed to UP [...] ig4iic0: <Intel Alder Lake-M I2C Controller-0> mem 0x82226000-0x82226fff at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 [...] ig4iic1: <Intel Alder Lake-M I2C Controller-4> mem 0x82228000-0x82228fff at device 25.0 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 [...] iicbus1: <unknown card> at addr 0x23 [...] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x8222d000-0x8222d0ff at device 31.4 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] ums0 on uhub1 [...] ums0: <SONiX USB DEVICE, class 0/0, rev 2.00/1.35, addr 1> on usbus1 [...] ums0: 3 buttons and [XYZ] coordinates ID=6 [...] lo0: link state changed to UP [...] pflog0: permanently promiscuous mode enabled [...] igc0: link state changed to DOWN [...] igc1: link state changed to DOWN [...] igc1: link state changed to UP [...] igc0: link state changed to UP [...] igc0: promiscuous mode enabled [...] igc1: promiscuous mode enabled [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] ugen1.2: <SONiX USB DEVICE> at usbus1 (disconnected) [...] ukbd0: at uhub1, port 3, addr 1 (disconnected) [...] ukbd0: detached [...] ums0: at uhub1, port 3, addr 1 (disconnected) [...] ums0: detached [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] igc1: link state changed to DOWN [...] igc1: link state changed to UP [...] arp: XXX.XXX.XXX.XXX moved from XXX to XXX on igc0 [...] igc0: promiscuous mode disabled [...] igc1: promiscuous mode disabled [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 20d4h51m23s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE-p3 stable/25.1-n269769-0381600e81a4 SMP amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 3840x2160 [...] CPU microcode: updated from 0x1c to 0x1d [...] CPU: Intel(R) N150 (806.40-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x15c0fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 34358689792 (32767 MB) [...] avail memory = 33145790464 (31610 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <COREv4 COREBOOT> [...] WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 2 3 1 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd0 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x76135000-0x7613501e [...] smbios0: Version: 3.3, BCD Revision: 3.3 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <COREv4 COREBOOT> [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 550 [...] Event timer "HPET1" frequency 19200000 Hz quality 440 [...] Event timer "HPET2" frequency 19200000 Hz quality 440 [...] Event timer "HPET3" frequency 19200000 Hz quality 440 [...] Event timer "HPET4" frequency 19200000 Hz quality 440 [...] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] vgapci0: <VGA-compatible display> port 0x1000-0x103f mem 0x81000000-0x81ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 [...] vgapci0: Boot video device [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x82200000-0x8220ffff at device 13.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] xhci1: <XHCI (generic) USB 3.0 controller> mem 0x82210000-0x8221ffff at device 20.0 on pci0 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] ahci0: <AHCI SATA controller> port 0x1060-0x1067,0x1068-0x106b,0x1040-0x105f mem 0x82224000-0x82225fff,0x8222c000-0x8222c0ff,0x8222b000-0x8222b7ff at device 23.0 on pci0 [...] ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] sdhci_pci0: <Generic SD HCI> mem 0x82229000-0x82229fff at device 26.0 on pci0 [...] sdhci_pci0: 1 slot(s) allocated [...] mmc0: <MMC/SD bus> on sdhci_pci0 [...] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80600000-0x80603fff at device 0.0 on pci1 [...] igc0: EEPROM V2.17-0 eTrack 0x80000303 [...] igc0: Using 1024 TX descriptors and 1024 RX descriptors [...] igc0: Using 4 RX queues 4 TX queues [...] igc0: Using MSI-X interrupts with 5 vectors [...] igc0: Ethernet address: ... [...] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 [...] pci2: <ACPI PCI bus> on pcib2 [...] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80700000-0x807fffff,0x80900000-0x80903fff at device 0.0 on pci2 [...] igc1: EEPROM V2.17-0 eTrack 0x80000303 [...] igc1: Using 1024 TX descriptors and 1024 RX descriptors [...] igc1: Using 4 RX queues 4 TX queues [...] igc1: Using MSI-X interrupts with 5 vectors [...] igc1: Ethernet address: ... [...] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 [...] pci3: <ACPI PCI bus> on pcib3 [...] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80a00000-0x80afffff,0x80c00000-0x80c03fff at device 0.0 on pci3 [...] igc2: EEPROM V2.17-0 eTrack 0x80000303 [...] igc2: Using 1024 TX descriptors and 1024 RX descriptors [...] igc2: Using 4 RX queues 4 TX queues [...] igc2: Using MSI-X interrupts with 5 vectors [...] igc2: Ethernet address: ... [...] igc2: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 [...] pci4: <ACPI PCI bus> on pcib4 [...] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80d00000-0x80dfffff,0x80f00000-0x80f03fff at device 0.0 on pci4 [...] igc3: EEPROM V2.17-0 eTrack 0x80000303 [...] igc3: Using 1024 TX descriptors and 1024 RX descriptors [...] igc3: Using 4 RX queues 4 TX queues [...] igc3: Using MSI-X interrupts with 5 vectors [...] igc3: Ethernet address: ... [...] igc3: netmap queues/slots: TX 4/1024, RX 4/1024 [...] pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci5: <ACPI PCI bus> on pcib5 [...] nvme0: <Generic NVMe Device> mem 0x82000000-0x82003fff at device 0.0 on pci5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] hdac0: <Intel Alder Lake-N HDA Controller> mem 0x82220000-0x82223fff,0x82100000-0x821fffff at device 31.3 on pci0 [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] ns8250: UART FCR is broken [...] uart0: console (115200,n,8,1) [...] ns8250: UART FCR is broken [...] ns8250: UART FCR is broken [...] uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] Timecounter "TSC" frequency 806401635 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub0 on usbus1 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN ... MFG 06/2021 by 21 0x0000> at mmc0 200.0MHz/8bit/8192-block [...] mmcsd0boot0: 4MB partition 1 at mmcsd0 [...] mmcsd0boot1: 4MB partition 2 at mmcsd0 [...] mmcsd0rpmb: 4MB partition 3 at mmcsd0 [...] nvme0: Allocated 64MB host memory buffer [...] nda0 at nvme0 bus 0 scbus1 target 0 lun 1 [...] nda0: <KINGSTON SNV3S500G SDQ00103 50026B728354C867> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 476940MB (976773168 512 byte sectors) [...] Trying to mount root from zfs:zroot/ROOT/20250607144904 []... [...] uhub1: 3 ports with 3 removable, self powered [...] uhub0: 16 ports with 16 removable, self powered [...] Dual Console: Serial Primary, Video Secondary [...] pid 33 (zpool) is attempting to use unsafe AIO requests - not logging anymore