[...] ---<<BOOT>>--- [...] Copyright (c) 712F-7937 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.0-CURRENT #0 main-n256605-a0b956f5ac5: Fri Jul 8 09:09:00 UTC 2022 [...] XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] WARNING: WITNESS option enabled, expect reduced performance. [...] VT(vbefb): resolution 800x600 [...] CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2399.57-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> [...] AMD Features=0x20100800<SYSCALL,NX,LM> [...] AMD Features2=0x1<LAHF> [...] VT-x: HLT,PAUSE [...] TSC: P-state invariant, performance statistics [...] real memory = 4294967296 (4096 MB) [...] avail memory = 4102066176 (3912 MB) [...] Event timer "LAPIC" quality 100 [...] ACPI APIC Table: <A_M_I_ OEMAPIC > [...] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [...] FreeBSD/SMP: 1 package(s) x 4 core(s) [...] arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. [...] ioapic0 <Version 2.0> irqs 0-23 [...] Launching APs: 3 2 1 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] smbios0: <System Management BIOS> at iomem 0xfbfe0-0xfbffe [...] smbios0: Version: 2.5 [...] aesni0: No AES or SHA support. [...] acpi0: <A_M_I_ OEMXSDT> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 450 [...] Event timer "HPET1" frequency 14318180 Hz quality 440 [...] Event timer "HPET2" frequency 14318180 Hz quality 440 [...] Event timer "HPET3" frequency 14318180 Hz quality 440 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem 0xfd000000-0xfdffffff,0xe8000000-0xefffffff,0xe6000000-0xe7ffffff irq 16 at device 0.0 on pci1 [...] vgapci0: Boot video device [...] hdac0: <NVIDIA (0x0e0a) HDA Controller> mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.1 on pci1 [...] uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 26.0 on pci0 [...] uhci0: LegSup = 0x2f00 [...] usbus0 on uhci0 [...] usbus0: 12Mbps Full Speed USB v1.0 [...] uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb880-0xb89f irq 21 at device 26.1 on pci0 [...] uhci1: LegSup = 0x2f00 [...] usbus1 on uhci1 [...] usbus1: 12Mbps Full Speed USB v1.0 [...] uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0 [...] uhci2: LegSup = 0x2f00 [...] usbus2 on uhci2 [...] usbus2: 12Mbps Full Speed USB v1.0 [...] ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfcffe000-0xfcffe3ff irq 18 at device 26.7 on pci0 [...] usbus3: EHCI version 1.0 [...] usbus3 on ehci0 [...] usbus3: 480Mbps High Speed USB v2.0 [...] hdac1: <Intel 82801JI HDA Controller> mem 0xfcff8000-0xfcffbfff irq 22 at device 27.0 on pci0 [...] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 [...] pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 [...] pci2: <ACPI PCI bus> on pcib3 [...] atapci0: <JMicron JMB368 UDMA133 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f irq 16 at device 0.0 on pci2 [...] ata2: <ATA channel> at channel 0 on atapci0 [...] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 [...] pci3: <ACPI PCI bus> on pcib4 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfbeff000-0xfbefffff,0xfbee0000-0xfbeeffff irq 17 at device 0.0 on pci3 [...] re0: Using 1 MSI-X message [...] re0: Chip rev. 0x3c000000 [...] re0: MAC rev. 0x00400000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb080-0xb09f irq 23 at device 29.0 on pci0 [...] uhci3: LegSup = 0x2f00 [...] usbus4 on uhci3 [...] usbus4: 12Mbps Full Speed USB v1.0 [...] uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb400-0xb41f irq 19 at device 29.1 on pci0 [...] uhci4: LegSup = 0x2f00 [...] usbus5 on uhci4 [...] usbus5: 12Mbps Full Speed USB v1.0 [...] uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb480-0xb49f irq 18 at device 29.2 on pci0 [...] uhci5: LegSup = 0x2f00 [...] usbus6 on uhci5 [...] usbus6: 12Mbps Full Speed USB v1.0 [...] ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfcffc000-0xfcffc3ff irq 23 at device 29.7 on pci0 [...] usbus7: EHCI version 1.0 [...] usbus7 on ehci1 [...] usbus7: 480Mbps High Speed USB v2.0 [...] pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 [...] pci4: <ACPI PCI bus> on pcib5 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] ahci0: <Intel ICH10 AHCI SATA controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa41f mem 0xfcff4000-0xfcff47ff irq 19 at device 31.2 on pci0 [...] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported [...] ahcich0: <AHCI channel> at channel 0 on ahci0 [...] ahcich1: <AHCI channel> at channel 1 on ahci0 [...] ahcich2: <AHCI channel> at channel 2 on ahci0 [...] ahcich3: <AHCI channel> at channel 3 on ahci0 [...] ahcich4: <AHCI channel> at channel 4 on ahci0 [...] ahcich5: <AHCI channel> at channel 5 on ahci0 [...] ahciem0: <AHCI enclosure management bridge> on ahci0 [...] acpi_button0: <Power Button> on acpi0 [...] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 [...] ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode [...] ppc0: FIFO with 16/16/9 bytes threshold [...] ppbus0: <Parallel port bus> on ppc0 [...] lpt0: <Printer> on ppbus0 [...] lpt0: Interrupt-driven port [...] ppi0: <Parallel I/O> on ppbus0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 [...] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] Timecounter "TSC-low" frequency 1199768176 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] hdacc0: <NVIDIA (0x0040) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x0040) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 5 on hdaa0 [...] pcm2: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm3: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] hdacc1: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac1 [...] hdaa1: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc1 [...] pcm4: <Realtek ALC662 rev1 (Rear Analog)> at nid 20 and 24,26 on hdaa1 [...] pcm5: <Realtek ALC662 rev1 (Front Analog)> at nid 27 and 25 on hdaa1 [...] pcm6: <Realtek ALC662 rev1 (Onboard Digital)> at nid 30 on hdaa1 [...] WARNING: WITNESS option enabled, expect reduced performance. [...] ugen3.1: <Intel EHCI root HUB> at usbus3 [...] ugen6.1: <Intel UHCI root HUB> at usbus6 [...] ugen2.1: <Intel UHCI root HUB> at usbus2 [...] uhub0 on usbus3 [...] uhub1 on usbus2 [...] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 [...] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 [...] uhub2 on usbus6 [...] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 [...] ugen7.1: <Intel EHCI root HUB> at usbus7 [...] ugen1.1: <Intel UHCI root HUB> at usbus1 [...] uhub3 on usbus7 [...] uhub4 on usbus1 [...] uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 [...] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [...] ugen0.1: <Intel UHCI root HUB> at usbus0 [...] ugen5.1: <Intel UHCI root HUB> at usbus5 [...] uhub5 on usbus5 [...] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 [...] uhub6 on usbus0 [...] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 [...] ugen4.1: <Intel UHCI root HUB> at usbus4 [...] uhub7 on usbus4 [...] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 [...] Trying to mount root from cd9660:/dev/iso9660/LIVE []... [...] uhub6: 2 ports with 2 removable, self powered [...] uhub7: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 2 ports with 2 removable, self powered [...] uhub4: 2 ports with 2 removable, self powered [...] uhub5: 2 ports with 2 removable, self powered [...] Root mount waiting for: usbus3 CAM usbus7 [...] Root mount waiting for: usbus3 CAM usbus7 [...] uhub0: 6 ports with 6 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered [...] Root mount waiting for: CAM usbus7 [...] ugen7.2: <USB DISK 2.0> at usbus7 [...] umass0 on uhub3 [...] umass0: <USB DISK 2.0, class 0/0, rev 2.00/10.29, addr 2> on usbus7 [...] umass0: SCSI over Bulk-Only; quirks = 0x4000 [...] umass0:8:0: Attached to scbus8 [...] Root mount waiting for: CAM usbus7 [...] ugen4.2: <Logitech USB Optical Mouse> at usbus4 [...] usb_alloc_device: set address 3 failed (USB_ERR_IOERROR, ignored) [...] Root mount waiting for: CAM [...] ugen6.2: <vendor 0x04d9 USB Keyboard> at usbus6 [...] ukbd0 on uhub2 [...] ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on usbus6 [...] kbd2 at ukbd0 [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] Root mount waiting for: CAM [...] Root mount waiting for: CAM [...] cam_periph_alloc: attempt to re-allocate valid device pass0 rejected flags 0 refcount 1 [...] passasync: Unable to attach new device due to status 0x6: CCB request was invalid [...] ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 [...] ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device [...] ses0: SEMB SES Device [...] ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 [...] ada0: <KINGSTON SV300S37A120G 521ABBF0> ATA8-ACS SATA 3.x device [...] ada0: Serial Number... [...] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) [...] ada0: Command Queueing enabled [...] ada0: 114473MB (234441648 512 byte sectors) [...] ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus1 target 0 [...] da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 [...] da0: <USB DISK 2.0 1029> Removable Direct Access SCSI device [...] da0: Serial Number... [...] da0: 40.000MB/s transfers [...] da0: 7776MB (15925248 512 byte sectors) [...] da0: quirks=0x2<NO_6_BYTE> [...] GEOM_LABEL[1]: MSDOSFS: ada0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider ada0 is diskid/XXXXXXXXXXXXXXXXXXXXXX [...] GEOM_PART: integrity check failed (ada0s4, BSD) [...] UFS2 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (16384) [...] UFS2 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (16384) [...] GEOM_LABEL[1]: MSDOSFS: ada0s4: FAT32 volume not valid. [...] GEOM: da0: the secondary GPT table is corrupt or invalid. [...] GEOM: da0: using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: ISO9660 file system detected on da0. [...] GEOM_LABEL[1]: Label for provider da0 is iso9660/LIVE. [...] GEOM_LABEL[1]: MSDOSFS: da0: FAT12/16 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0 is diskid/XXXXXXXXXXXXXXXXXXXXXX [...] GEOM_PART: integrity check failed (diskid/XXXXXXXXXXXXXXXXXXXXXXXX BSD) [...] UFS2 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (16384) [...] UFS2 superblock failed: fs->fs_maxbsize (0) < fs->fs_bsize (16384) [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXX FAT32 volume not valid. [...] GEOM_LABEL[1]: Label for provider da0p1 is gptid/HASH_FD3-267F-ADD6-36AE-9963176073AF. [...] GEOM_LABEL[1]: MSDOSFS: da0p1: no FAT signature found. [...] GEOM_LABEL[1]: Label for provider da0p2 is gptid/HASH_5CD-5352-CC54-EFFB-E71A463BC462. [...] GEOM_LABEL[1]: MSDOSFS: da0p2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label for provider da0p2 is msdosfs/EFISYS. [...] GEOM: iso9660/LIVE: the secondary GPT table is corrupt or invalid. [...] GEOM: iso9660/LIVE: using the primary only -- recovery suggested. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXX the secondary GPT table is corrupt or invalid. [...] GEOM: diskid/XXXXXXXXXXXXXXXXXXXXXX using the primary only -- recovery suggested. [...] GEOM_LABEL[1]: Label HASH_FD3-267F-ADD6-36AE-9963176073AF(gptid/HASH_FD3-267F-ADD6-36AE-9963176073AF) already exists (iso9660/LIVEp1). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp1: no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_5CD-5352-CC54-EFFB-E71A463BC462(gptid/HASH_5CD-5352-CC54-EFFB-E71A463BC462) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: MSDOSFS: iso9660/LIVEp2: FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (iso9660/LIVEp2). [...] GEOM_LABEL[1]: Label HASH_FD3-267F-ADD6-36AE-9963176073AF(gptid/HASH_FD3-267F-ADD6-36AE-9963176073AF) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXX no FAT signature found. [...] GEOM_LABEL[1]: Label HASH_5CD-5352-CC54-EFFB-E71A463BC462(gptid/HASH_5CD-5352-CC54-EFFB-E71A463BC462) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXX). [...] GEOM_LABEL[1]: MSDOSFS: diskid/XXXXXXXXXXXXXXXXXXXXXXXX FAT12/FAT16 volume detected. [...] GEOM_LABEL[1]: Label EFISYS(msdosfs/EFISYS) already exists (diskid/XXXXXXXXXXXXXXXXXXXXXXX). [...] random: unblocking device. [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] GEOM_LABEL[1]: MSDOSFS: md0: no FAT signature found. [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: Label for provider md0.uzip is ufsid/XXXXXXXXXXXXXXXXX [...] GEOM_LABEL[1]: UFS1 file system detected on md0.uzip. [...] GEOM_LABEL[1]: MSDOSFS: md0.uzip: no FAT signature found. [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] lock order reversal: [...] 1st 0xfffff80008688770 ufs (ufs, lockmgr) @ /usr/src/sys/fs/unionfs/union_vnops.c:2010 [...] 2nd 0xfffff800086883f0 tmpfs (tmpfs, lockmgr) @ /usr/src/sys/fs/unionfs/union_vnops.c:2041 [...] 3rd 0xfffff800088c7e70 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_vnops.c:3715 [...] lock order ufs -> tmpfs established at: [...] #0 0xffffffff80c5a22d at witness_checkorder+0x32d [...] #1 0xffffffff80bb6ba2 at lockmgr_lock_flags+0x182 [...] #2 0xffffffff82af0aba at unionfs_lock+0x37a [...] #3 0xffffffff80cf3f14 at _vn_lock+0x54 [...] #4 0xffffffff82aed403 at unionfs_root+0x43 [...] #5 0xffffffff80cd4c92 at vfs_domount_first+0x282 [...] #6 0xffffffff80cd124f at vfs_domount+0x2cf [...] #7 0xffffffff80ccfc28 at vfs_donmount+0x878 [...] #8 0xffffffff80ccf379 at sys_nmount+0x69 [...] #9 0xffffffff810c533e at amd64_syscall+0x12e [...] #10 0xffffffff8109829b at fast_syscall_common+0xf8 [...] lock order tmpfs -> ufs attempted at: [...] #0 0xffffffff80c5aafd at witness_checkorder+0xbfd [...] #1 0xffffffff80bb6ba2 at lockmgr_lock_flags+0x182 [...] #2 0xffffffff80f356fc at ffs_lock+0x6c [...] #3 0xffffffff80cf3f14 at _vn_lock+0x54 [...] #4 0xffffffff80cf87b8 at vn_lock_pair+0x1e8 [...] #5 0xffffffff82aea4ce at unionfs_nodeget+0x35e [...] #6 0xffffffff82aede81 at unionfs_lookup+0x741 [...] #7 0xffffffff80cbc576 at vfs_cache_lookup+0xa6 [...] #8 0xffffffff80ccd17a at vfs_lookup+0x48a [...] #9 0xffffffff80ccc2d9 at namei+0x329 [...] #10 0xffffffff80cf36b5 at vn_open_cred+0x4d5 [...] #11 0xffffffff80cea2ea at kern_openat+0x29a [...] #12 0xffffffff810c533e at amd64_syscall+0x12e [...] #13 0xffffffff8109829b at fast_syscall_common+0xf8 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] Cuse v0.1.36 @ /dev/cuse [...] ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x400-0x41f mem 0xfcff6000-0xfcff60ff irq 18 at device 31.3 on pci0 [...] smbus0: <System Management Bus> on ichsmb0 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored) [...] NVRM: The NVIDIA GeForce GTX 760 GPU installed in this system is [...] NVRM: supported through the NVIDIA 470.xx Legacy drivers. Please [...] NVRM: visit http://www.nvidia.com/object/unix.html for more [...] NVRM: information. The 510.60.02 NVIDIA driver will ignore [...] NVRM: this GPU. Continuing probe... [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.60.02 Wed Mar 16 11:03:12 UTC 2022 [...] usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR [...] ugen4.3: <Unknown > at usbus4 (disconnected) [...] uhub_reattach_port: could not allocate new device [...] lock order reversal: [...] 1st 0xfffff80008e95af0 unionfs (unionfs, lockmgr) @ /usr/src/sys/fs/unionfs/union_subr.c:456 [...] 2nd 0xfffff800089d85b0 tmpfs (tmpfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:3265 [...] lock order tmpfs -> unionfs established at: [...] #0 0xffffffff80c5a22d at witness_checkorder+0x32d [...] #1 0xffffffff80bb6ba2 at lockmgr_lock_flags+0x182 [...] #2 0xffffffff82af0b5d at unionfs_lock+0x41d [...] #3 0xffffffff80cf3f14 at _vn_lock+0x54 [...] #4 0xffffffff80cdc29f at vget_finish+0x4f [...] #5 0xffffffff80cb7ac4 at cache_lookup+0x314 [...] #6 0xffffffff80cbc54b at vfs_cache_lookup+0x7b [...] #7 0xffffffff80ccd17a at vfs_lookup+0x48a [...] #8 0xffffffff80ccc2d9 at namei+0x329 [...] #9 0xffffffff80cf36b5 at vn_open_cred+0x4d5 [...] #10 0xffffffff80cea2ea at kern_openat+0x29a [...] #11 0xffffffff810c533e at amd64_syscall+0x12e [...] #12 0xffffffff8109829b at fast_syscall_common+0xf8 [...] lock order unionfs -> tmpfs attempted at: [...] #0 0xffffffff80c5aafd at witness_checkorder+0xbfd [...] #1 0xffffffff80bb6ba2 at lockmgr_lock_flags+0x182 [...] #2 0xffffffff80cf3f14 at _vn_lock+0x54 [...] #3 0xffffffff80cdc8da at vput_final+0x16a [...] #4 0xffffffff82aeabb9 at unionfs_noderem+0x2f9 [...] #5 0xffffffff82af072d at unionfs_reclaim+0xd [...] #6 0xffffffff81196a54 at VOP_RECLAIM_APV+0x34 [...] #7 0xffffffff80cde0d4 at vgonel+0x3c4 [...] #8 0xffffffff80cde7be at vrecycle+0x3e [...] #9 0xffffffff82af071c at unionfs_inactive+0x1c [...] #10 0xffffffff80cdd1ef at vinactivef+0xbf [...] #11 0xffffffff80cdca17 at vput_final+0x2a7 [...] #12 0xffffffff80cebb85 at kern_funlinkat+0x265 [...] #13 0xffffffff80ceb918 at sys_unlink+0x28 [...] #14 0xffffffff810c533e at amd64_syscall+0x12e [...] #15 0xffffffff8109829b at fast_syscall_common+0xf8 [...] NVRM: The NVIDIA GeForce GTX 760 GPU installed in this system is [...] NVRM: supported through the NVIDIA 470.xx Legacy drivers. Please [...] NVRM: visit http://www.nvidia.com/object/unix.html for more [...] NVRM: information. The 510.60.02 NVIDIA driver will ignore [...] NVRM: this GPU. Continuing probe... [...] lo0: link state changed to UP [...] re0: link state changed to DOWN [...] ums0 on uhub7 [...] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 2> on usbus4 [...] ums0: 3 buttons and [XYZ] coordinates ID=0 [...] uhid0 on uhub2 [...] uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 2> on usbus6