Probe #4f53e7ef9f of Dell 02C2CP A03 (PowerEdge R630)

Log: dmesg

[...] Copyright (c) 668B-5668 The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 13.2-RELEASE-p10 stable/24.1-n254984-f7b006edfa8 SMP amd64 [...] FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) [...] VT(vga): resolution 640x480 [...] CPU: Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz (2400.08-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> [...] Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> [...] XSAVE Features=0x1<XSAVEOPT> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 137438953472 (131072 MB) [...] avail memory = 133669756928 (127477 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <DELL PE_SC3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 28 CPUs [...] FreeBSD/SMP: 2 package(s) x 14 core(s) [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-23 [...] ioapic1 <Version 2.0> irqs 24-47 [...] ioapic2 <Version 2.0> irqs 48-71 [...] Launching APs: 22 15 6 1 3 17 21 5 12 26 8 4 23 25 14 9 2 20 11 13 24 10 19 7 18 16 27 [...] random: entropy device external interface [...] wlan: mac acl policy registered [...] kbd1 at kbdmux0 [...] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. [...] vtvga0: <VT VGA driver> [...] smbios0: <System Management BIOS> at iomem 0xfe300-0xfe31e [...] smbios0: Version: 2.8, BCD Revision: 2.8 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> [...] acpi0: <DELL PE_SC3> [...] acpi0: Power Button (fixed) [...] cpu0: <ACPI CPU> on acpi0 [...] atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 14318180 Hz quality 950 [...] Event timer "HPET" frequency 14318180 Hz quality 350 [...] Event timer "HPET1" frequency 14318180 Hz quality 340 [...] Event timer "HPET2" frequency 14318180 Hz quality 340 [...] Event timer "HPET3" frequency 14318180 Hz quality 340 [...] Event timer "HPET4" frequency 14318180 Hz quality 340 [...] Event timer "HPET5" frequency 14318180 Hz quality 340 [...] Event timer "HPET6" frequency 14318180 Hz quality 340 [...] Event timer "HPET7" frequency 14318180 Hz quality 340 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 [...] pcib0: <ACPI Host-PCI bridge> on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pci0: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci0: <dasp, performance counters> at device 18.5 (no driver attached) [...] pcib1: <ACPI Host-PCI bridge> on acpi0 [...] pci1: <ACPI PCI bus> on pcib1 [...] pci1: <dasp, performance counters> at device 8.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 9.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 11.2 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 16.6 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.1 (no driver attached) [...] pci1: <dasp, performance counters> at device 18.5 (no driver attached) [...] acpi_syscontainer0: <System Container> on acpi0 [...] acpi_syscontainer1: <System Container> on acpi0 [...] apei0: <ACPI Platform Error Interface> on acpi0 [...] pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 [...] pci2: <ACPI PCI bus> numa-domain 0 on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2 [...] pci3: <ACPI PCI bus> numa-domain 0 on pcib3 [...] AVAGO MegaRAID SAS FreeBSD mrsas driver version: XXX.XXX.XXX.XXX-fbsd [...] mfi0: <Invader> port 0x2000-0x20ff mem 0x94d00000-0x94d0ffff,0x94c00000-0x94cfffff irq 26 at device 0.0 numa-domain 0 on pci3 [...] mfi0: Using MSI [...] mfi0: Megaraid SAS driver Ver 4.23 [...] mfi0: FW MaxCmds = 928, limiting to 128 [...] mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 [...] mfi0: 5455 (764460776s/0x0020/info) - Shutdown command received from host [...] mfi0: 5456 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f47/1028) [...] mfi0: 5457 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8368 [...] mfi0: 5458 (boot + 11s/0x0008/info) - Battery Present [...] mfi0: 5459 (boot + 11s/0x0020/info) - Package version XXX.XXX.XXX.XXX [...] mfi0: 5460 (boot + 11s/0x0020/info) - Board Revision A08 [...] mfi0: 5461 (boot + 15s/0x0008/info) - Battery temperature is normal [...] mfi0: 5462 (boot + 15s/0x0008/info) - Battery started charging [...] mfi0: 5463 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold [...] mfi0: 5464 (boot + 15s/0x0008/info) - Battery relearn pending: Battery is under charge [...] mfi0: 5465 (boot + 28s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored [...] mfi0: 5466 (boot + 28s/0x0002/info) - Inserted: Encl PD 20 [...] pcib4: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci2 [...] pci4: <ACPI PCI bus> numa-domain 0 on pcib4 [...] ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.3-k> mem 0x92800000-0x92ffffff,0x93818000-0x9381ffff irq 32 at device 0.0 numa-domain 0 on pci4 [...] ixl0: fw 9.120.73026 api 1.15 nvm 9.20 etid 8000d8d1 oem 0.0.0 [...] ixl0: PF-ID[0]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl0: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl0: Using 14 RX queues 14 TX queues [...] ixl0: Using MSI-X interrupts with 15 vectors [...] ixl0: Ethernet address: ... [...] ixl0: Allocating 16 queues for PF LAN VSI; 14 queues active [...] ixl0: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl0: SR-IOV ready [...] ixl0: netmap queues/slots: TX 14/1024, RX 14/1024 [...] ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.3-k> mem 0x92000000-0x927fffff,0x93810000-0x93817fff irq 32 at device 0.1 numa-domain 0 on pci4 [...] ixl1: fw 9.120.73026 api 1.15 nvm 9.20 etid 8000d8d1 oem 0.0.0 [...] ixl1: PF-ID[1]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl1: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl1: Using 14 RX queues 14 TX queues [...] ixl1: Using MSI-X interrupts with 15 vectors [...] ixl1: Ethernet address: ... [...] ixl1: Allocating 16 queues for PF LAN VSI; 14 queues active [...] ixl1: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl1: SR-IOV ready [...] ixl1: netmap queues/slots: TX 14/1024, RX 14/1024 [...] ixl2: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.3-k> mem 0x91800000-0x91ffffff,0x93808000-0x9380ffff irq 32 at device 0.2 numa-domain 0 on pci4 [...] ixl2: fw 9.120.73026 api 1.15 nvm 9.20 etid 8000d8d1 oem 0.0.0 [...] ixl2: PF-ID[2]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl2: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl2: Using 14 RX queues 14 TX queues [...] ixl2: Using MSI-X interrupts with 15 vectors [...] ixl2: Ethernet address: ... [...] ixl2: Allocating 16 queues for PF LAN VSI; 14 queues active [...] ixl2: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl2: SR-IOV ready [...] ixl2: netmap queues/slots: TX 14/1024, RX 14/1024 [...] ixl3: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.3-k> mem 0x91000000-0x917fffff,0x93800000-0x93807fff irq 32 at device 0.3 numa-domain 0 on pci4 [...] ixl3: fw 9.120.73026 api 1.15 nvm 9.20 etid 8000d8d1 oem 0.0.0 [...] ixl3: PF-ID[3]: VFs 32, MSI-X 129, VF MSI-X 5, QPs 384, I2C [...] ixl3: Using 1024 TX descriptors and 1024 RX descriptors [...] ixl3: Using 14 RX queues 14 TX queues [...] ixl3: Using MSI-X interrupts with 15 vectors [...] ixl3: Ethernet address: ... [...] ixl3: Allocating 16 queues for PF LAN VSI; 14 queues active [...] ixl3: PCI Express Bus: Speed 8.0GT/s Width x8 [...] ixl3: SR-IOV ready [...] ixl3: netmap queues/slots: TX 14/1024, RX 14/1024 [...] pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci2 [...] pci5: <ACPI PCI bus> numa-domain 0 on pcib5 [...] pci0:2:0:0: no valid vpd ident found [...] pci0:2:0:0: failed to read VPD data. [...] bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x94a30000-0x94a3ffff,0x94a40000-0x94a4ffff,0x94a50000-0x94a5ffff irq 40 at device 0.0 numa-domain 0 on pci5 [...] bge0: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus0: <MII bus> numa-domain 0 on bge0 [...] brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 [...] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge0: Using defaults for TSO: 65518/35/2048 [...] bge0: Ethernet address: ... [...] bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x94a00000-0x94a0ffff,0x94a10000-0x94a1ffff,0x94a20000-0x94a2ffff irq 44 at device 0.1 numa-domain 0 on pci5 [...] bge1: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] miibus1: <MII bus> numa-domain 0 on bge1 [...] brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 [...] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge1: Using defaults for TSO: 65518/35/2048 [...] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] bge1: Ethernet address: ... [...] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.1 numa-domain 0 on pci2 [...] pci6: <ACPI PCI bus> numa-domain 0 on pcib6 [...] pci0:1:0:0: no valid vpd ident found [...] pci0:1:0:0: failed to read VPD data. [...] bge2: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x94b30000-0x94b3ffff,0x94b40000-0x94b4ffff,0x94b50000-0x94b5ffff irq 41 at device 0.0 numa-domain 0 on pci6 [...] bge2: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] ixl2: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] miibus2: <MII bus> numa-domain 0 on bge2 [...] brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2 [...] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge2: Using defaults for TSO: 65518/35/2048 [...] bge2: Ethernet address: ... [...] bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x94b00000-0x94b0ffff,0x94b10000-0x94b1ffff,0x94b20000-0x94b2ffff irq 45 at device 0.1 numa-domain 0 on pci6 [...] bge3: APE FW version: NCSI vXXX.XXX.XXX.XXX [...] bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E [...] ixl3: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None [...] miibus3: <MII bus> numa-domain 0 on bge3 [...] brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3 [...] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow [...] bge3: Using defaults for TSO: 65518/35/2048 [...] bge3: Ethernet address: ... [...] pcib7: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2 [...] pci7: <ACPI PCI bus> numa-domain 0 on pcib7 [...] pci2: <unknown> at device 17.0 (no driver attached) [...] xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x94e00000-0x94e0ffff at device 20.0 numa-domain 0 on pci2 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0 numa-domain 0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci2: <simple comms> at device 22.0 (no driver attached) [...] pci2: <simple comms> at device 22.1 (no driver attached) [...] ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x94e11000-0x94e113ff irq 18 at device 26.0 numa-domain 0 on pci2 [...] usbus1: EHCI version 1.0 [...] usbus1 numa-domain 0 on ehci0 [...] usbus1: 480Mbps High Speed USB v2.0 [...] pcib8: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 [...] pci8: <PCI bus> numa-domain 0 on pcib8 [...] pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2 [...] pci9: <ACPI PCI bus> numa-domain 0 on pcib9 [...] pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9 [...] pci10: <PCI bus> numa-domain 0 on pcib10 [...] pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 [...] pci11: <PCI bus> numa-domain 0 on pcib11 [...] pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11 [...] pci12: <PCI bus> numa-domain 0 on pcib12 [...] vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x94800000-0x94803fff,0x94000000-0x947fffff irq 19 at device 0.0 numa-domain 0 on pci12 [...] vgapci0: Boot video device [...] ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x94e10000-0x94e103ff irq 18 at device 29.0 numa-domain 0 on pci2 [...] usbus2: EHCI version 1.0 [...] usbus2 numa-domain 0 on ehci1 [...] usbus2: 480Mbps High Speed USB v2.0 [...] isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 [...] isa0: <ISA bus> numa-domain 0 on isab0 [...] pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 [...] pci13: <ACPI PCI bus> numa-domain 1 on pcib13 [...] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 [...] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [...] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xed800-0xf17ff pnpid ORM0000 on isa0 [...] est0: <Enhanced SpeedStep Frequency Control> on cpu0 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est0 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est1 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est2 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est3 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est4 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est5 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est6 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est7 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est8 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est9 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est10 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est11 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est12 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est13 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est14 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est15 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est16 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est17 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est18 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est19 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est20 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est21 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est22 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est23 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est24 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est25 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est26 attach returned 6 [...] est: CPU supports Enhanced Speedstep, but is not recognized. [...] est: cpu_vendor GenuineIntel, msr 1b8400001800 [...] device_attach: est27 attach returned 6 [...] Timecounter "TSC-low" frequency 1199997748 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] ugen1.1: <Intel EHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen2.1: <Intel EHCI root HUB> at usbus2 [...] mfisyspd0 numa-domain 0 on mfi0 [...] mfisyspd0: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 0) [...] mfisyspd0: SYSPD volume attached [...] uhub0 numa-domain 0 on usbus1 [...] uhub1 numa-domain 0 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] mfisyspd1 numa-domain 0 on mfi0 [...] mfisyspd1: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 1) [...] mfisyspd1: SYSPD volume attached [...] uhub2 numa-domain 0 on usbus2 [...] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [...] mfisyspd2 numa-domain 0 on mfi0 [...] mfisyspd2: 953869MB (1953525168 sectors) SYSPD volume (deviceid: 2) [...] mfisyspd2: SYSPD volume attached [...] mfi0: 5467 (boot + 28s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5e09406024da3uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 [...] 300,0000000000000000 [...] mfi0: 5468 (boot + 28s/0x0002/info) - Inserted: PD 00(e0x20/s0) [...] mfi0: 5469 (boot + 28s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221104000000,0000000000000000 [...] mfi0: 5470 (boot + 28s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive [...] mfi0: 5471 (boot + 28s/0x0002/info) - Inserted: PD 01(e0x20/s1) [...] mfi0: 5472 (boot + 28s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000 [...] mfi0: 5473 (boot + 28s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive [...] mfi0: 5474 (boot + 28s/0x0002/info) - Inserted: PD 02(e0x20/s2) [...] mfi0: 5475 (boot + 28s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=4433221106000000,0000000000000000 [...] mfi0: 5476 (boot + 28s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive [...] mfi0: 5477 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5478 (boot + 28s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 4433221106000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5479 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5480 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5481 (boot + 28s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 4433221106000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5482 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5483 (boot + 28s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 4433221106000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5484 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5485 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5486 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5487 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5488 (boot + 28s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 4433221106000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5489 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5490 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5491 (boot + 28s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 4433221106000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5492 (boot + 28s/0x0002/info) - Unexpected sense: PD 01(e0x20/s1) Path 4433221100000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5493 (boot + 28s/0x0002/info) - Unexpected sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5494 (boot + 28s/0x0002/info) - Unexpected sense: PD 02(e0x20/s2) Path 4433221106000000, CDB: b5 02 07 fe 80 00 00 00 00 01 00 00, Sense: b/00/00 [...] mfi0: 5495 (boot + 28s/0x0020/info) - Controller operating temperature within normal range, full operation restored [...] mfi0: 5496 (764463587s/0x0020/info) - Time established as 03/22/24 22:59:47; (28 seconds since power on) [...] mfi0: 5497 (764463661s/0x0020/info) - Host driver is loaded and operational [...] ixl1: link state changed to UP [...] ixl0: link state changed to UP [...] ixl2: link state changed to UP [...] ixl3: link state changed to UP [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub0: 2 ports with 2 removable, self powered [...] uhub2: 2 ports with 2 removable, self powered [...] uhub1: 21 ports with 21 removable, self powered [...] Root mount waiting for: usbus0 usbus1 usbus2 [...] ugen0.2: <no manufacturer Gadget USB HUB> at usbus0 [...] uhub3 numa-domain 0 on uhub1 [...] uhub3: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 1> on usbus0 [...] ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 [...] uhub4 numa-domain 0 on uhub2 [...] uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 [...] ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 [...] uhub5 numa-domain 0 on uhub0 [...] uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 [...] uhub5: 6 ports with 6 removable, self powered [...] uhub4: 8 ports with 8 removable, self powered [...] uhub3: 6 ports with 6 removable, self powered


Hardware for Linux and BSD

GitHub