[...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1920x1200 [...] CPU: 13th Gen Intel(R) Core(TM) i7-13700HX (2304.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06f2 Family=0x6 Model=0xbf Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc18c410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1488fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16256065536 (15502 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 8BB3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: Non-uniform topology [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 20 19 14 11 5 15 18 10 16 21 23 22 17 9 3 4 13 8 12 7 6 2 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x5691a000-0x5691a01e [...] smbios0: Version: 3.4, BCD Revision: 3.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <HPQOEM SLIC-MPC> [...] acpi_ec_ecdt_probe: can't get handle [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 350 [...] Event timer "HPET1" frequency 19200000 Hz quality 340 [...] Event timer "HPET2" frequency 19200000 Hz quality 340 [...] Event timer "HPET3" frequency 19200000 Hz quality 340 [...] Event timer "HPET4" frequency 19200000 Hz quality 340 [...] Event timer "HPET5" frequency 19200000 Hz quality 340 [...] Event timer "HPET6" frequency 19200000 Hz quality 340 [...] Event timer "HPET7" frequency 19200000 Hz quality 340 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0x85000000-0x85ffffff,0x6000000000-0x61ffffffff,0x6200000000-0x6201ffffff at device 0.0 on pci1 [...] hdac0: <NVIDIA (0x22bd) HDA Controller> mem 0x86000000-0x86003fff at device 0.1 on pci1 [...] vgapci1: <VGA-compatible display> port 0x5000-0x503f mem 0x6202000000-0x6202ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci1: Boot video device [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x84480000-0x8448ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] ig4iic0: <Intel Raptor Lake-M I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] ig4iic0: controller error during attach-1 [...] device_attach: ig4iic0 attach returned 6 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] pci0: <serial bus> at device 25.0 (no driver attached) [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pcib2: failed to allocate initial memory window: 0x6c000000-0x841fffff [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pcib3: failed to allocate initial memory window: 0x6c000000-0x840fffff [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] pci4: <serial bus, USB> at device 0.0 (no driver attached) [...] pcib5: <PCI-PCI bridge> at device 1.0 on pci3 [...] pcib5: failed to allocate initial memory window: 0x78100000-0x840fffff [...] pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib6 [...] xhci1: <Intel Maple Ridge Thunderbolt 4 USB controller> mem 0x78000000-0x7800ffff at device 0.0 on pci5 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <PCI-PCI bridge> at device 3.0 on pci3 [...] pcib8: <ACPI PCI-PCI bridge> at device 27.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x84304000-0x84304fff,0x84300000-0x84303fff at device 0.0 on pci6 [...] re0: Using 1 MSI-X message [...] re0: turning off MSI enable bit. [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib9: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib9 [...] nvme0: <Generic NVMe Device> mem 0x84200000-0x84203fff at device 0.0 on pci7 [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] pci0: <simple comms> at device 30.1 (no driver attached) [...] pci0: <serial bus> at device 30.3 (no driver attached) [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <multimedia, audio> at device 31.3 (no driver attached) [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] hwpstate_intel16: <Intel Speed Shift> on cpu16 [...] hwpstate_intel17: <Intel Speed Shift> on cpu17 [...] hwpstate_intel18: <Intel Speed Shift> on cpu18 [...] hwpstate_intel19: <Intel Speed Shift> on cpu19 [...] hwpstate_intel20: <Intel Speed Shift> on cpu20 [...] hwpstate_intel21: <Intel Speed Shift> on cpu21 [...] hwpstate_intel22: <Intel Speed Shift> on cpu22 [...] hwpstate_intel23: <Intel Speed Shift> on cpu23 [...] Timecounter "TSC-low" frequency 1152000628 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] hdacc0: <NVIDIA (0x00a6) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x00a6) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x00a6) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x00a6) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <NVIDIA (0x00a6) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] uhub0 on usbus1 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <KXG80ZNV1T02 KIOXIA HP01AP40 533FC3JUFWHK> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] ig4iic0: <Intel Raptor Lake-M I2C Controller-0> mem 0x80000000-0x80000fff irq 27 at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus> on ig4iic0 [...] uhub0: 4 ports with 4 removable, self powered [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] uhub1: 26 ports with 26 removable, self powered [...] ugen0.2: <PixArt USB Optical Mouse> at usbus0 [...] usbhid0 on uhub1 [...] usbhid0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] hidbus0: <HID bus> on usbhid0 [...] Root mount waiting for: usbus0 [...] ugen0.3: <Logitech Gaming Keyboard G213> at usbus0 [...] usbhid1 on uhub1 [...] usbhid1: <Logitech Gaming Keyboard G213, class 0/0, rev 2.00/9.00, addr 2> on usbus0 [...] hidbus1: <HID bus> on usbhid1 [...] hkbd0: <Logitech Gaming Keyboard G213> on hidbus1 [...] kbd2 at hkbd0 [...] usbhid2 on uhub1 [...] usbhid2: <Logitech Gaming Keyboard G213, class 0/0, rev 2.00/9.00, addr 2> on usbus0 [...] hidbus2: <HID bus> on usbhid2 [...] hkbd1: <Logitech Gaming Keyboard G213> on hidbus2 [...] kbd3 at hkbd1 [...] ugen0.4: <DRFCB0ABIHW6RC HP True Vision FHD Camera> at usbus0 [...] ugen0.5: <PRiMAX HP FY23 OMEN 16 KBM> at usbus0 [...] usbhid3 on uhub1 [...] usbhid3: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus3: <HID bus> on usbhid3 [...] hkbd2: <PRiMAX HP FY23 OMEN 16 KBM Keyboard> on hidbus3 [...] kbd4 at hkbd2 [...] usbhid4 on uhub1 [...] usbhid4: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus4: <HID bus> on usbhid4 [...] usbhid5 on uhub1 [...] usbhid5: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus5: <HID bus> on usbhid5 [...] Root mount waiting for: usbus0 [...] ugen0.6: <HP, Inc HyperX Wireless Audio> at usbus0 [...] usbhid6 on uhub1 [...] usbhid6: <HP, Inc HyperX Wireless Audio, class 0/0, rev 2.00/41.00, addr 5> on usbus0 [...] hidbus6: <HID bus> on usbhid6 [...] ugen0.7: <vendor 0x8087 product 0x0033> at usbus0 [...] nvidia0: <NVIDIA GeForce RTX 4070 Laptop GPU> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 550.142 Wed Dec 11 04:40:21 UTC 2024 [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] iwlwifi0: <iwlwifi> mem 0x6203144000-0x6203147fff at device 20.3 on pci0 [...] iwlwifi0: Detected crf-id 0x400410, cnv-id 0x80401 wfpm id 0x80000020 [...] iwlwifi0: PCI dev 7a70/0094, rev=0x430, rfid=0x2010d000 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0-83.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either [...] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either [...] iwl-debug-yoyo_bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo_bin either [...] iwl_debug_yoyo_bin: could not load binary firmware /boot/firmware/iwl_debug_yoyo_bin either [...] iwlwifi0: loaded firmware version 83.e8f84e98.0 so-a0-gf-a0-83.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x430 [...] iwlwifi0: WRT: Invalid buffer destination: 0 [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] iwlwifi0: RFIm is deactivated, reason = 5 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0.pnvm' [...] iwlwifi0: loaded PNVM version 181407b3 [...] iwlwifi0: Detected RF GF, rfid=0x2010d000 [...] iwlwifi0: base HW address: XXX [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.CPWM.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] hms0: <PixArt USB Optical Mouse> on hidbus0 [...] hms0: 8 buttons and [XYW] coordinates ID=0 [...] hcons0: <Logitech Gaming Keyboard G213 Consumer Control> on hidbus2 [...] hms1: <PRiMAX HP FY23 OMEN 16 KBM Mouse> on hidbus3 [...] hms1: 5 buttons and [XYW] coordinates ID=2 [...] hcons1: <PRiMAX HP FY23 OMEN 16 KBM Consumer Control> on hidbus4 [...] hcons2: <HP, Inc HyperX Wireless Audio Consumer Control> on hidbus6 [...] iwlwifi0: WRT: Invalid buffer destination: 0 [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] iwlwifi0: RFIm is deactivated, reason = 5 [...] wlan0: Ethernet address: ... [...] re0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] Cuse v0.1.37 @ /dev/cuse [...] Security policy loaded: MAC/ntpd (mac_ntpd) [...] ACPI Warning: \134_SB.PC00.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20221020/nsarguments-212) [...] pid 2491 (gnome-shell), jid 0, uid 92: exited on signal 11 (core dumped) [...] usbhid0: at uhub1, port 1, addr 1 (disconnected) [...] hms0: detached [...] hidbus0: detached [...] usbhid0: detached [...] usbhid0 on uhub1 [...] usbhid0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] hidbus0: <HID bus> on usbhid0 [...] hms0: <PixArt USB Optical Mouse> on hidbus0 [...] hms0: 8 buttons and [XYW] coordinates ID=0 [...] pid 2769 (gnome-shell), jid 0, uid 92: exited on signal 11 (core dumped) [...] pid 2983 (gnome-calendar), jid 0, uid 1002: exited on signal 5 (no core dump - other error) [...] pid 3014 (tracker3), jid 0, uid 1002: exited on signal 10 (no core dump - other error) [...] pid 3019 (gnome-calendar), jid 0, uid 1002: exited on signal 5 (no core dump - other error) [...] pid 3039 (gnome-calendar), jid 0, uid 1002: exited on signal 5 (no core dump - other error) [...] pid 3059 (gnome-calendar), jid 0, uid 1002: exited on signal 5 (no core dump - other error) [...] pid 2993 (gnome-photos), jid 0, uid 1002: exited on signal 5 (no core dump - other error) [...] pid 3079 (gnome-calendar), jid 0, uid 1002: exited on signal 5 (no core dump - other error) [...] pid 2955 (epiphany), jid 0, uid 1002: exited on signal 11 (core dumped) [...] iicbus0: detached [...] ig4iic0: detached [...] pci0: <serial bus> at device 21.0 (no driver attached) [...] ig4iic0: <Intel Raptor Lake-M I2C Controller-0> mem 0x80000000-0x80000fff irq 27 at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus> on ig4iic0 [...] ig4iic1: <Intel Raptor Lake Additional Serial IO I2C Controller (0x7a7c)> at device 25.0 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus> on ig4iic1 [...] ig4iic2: <Intel Raptor Lake Additional Serial IO I2C Controller (0x7a2b)> at device 30.3 on pci0 [...] ig4iic2: Using MSI [...] ig4iic2: controller error during attach-2 [...] device_attach: ig4iic2 attach returned 6 [...] usbhid3: at uhub1, port 7, addr 4 (disconnected) [...] hms1: detached [...] hkbd2: detached [...] hidbus3: detached [...] usbhid3: detached [...] usbhid4: at uhub1, port 7, addr 4 (disconnected) [...] hcons1: detached [...] hidbus4: detached [...] usbhid4: detached [...] usbhid5: at uhub1, port 7, addr 4 (disconnected) [...] hidbus5: detached [...] usbhid5: detached [...] usbhid3 on uhub1 [...] usbhid3: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus3: <HID bus> on usbhid3 [...] hkbd2: <PRiMAX HP FY23 OMEN 16 KBM Keyboard> on hidbus3 [...] kbd4 at hkbd2 [...] hms1: <PRiMAX HP FY23 OMEN 16 KBM Mouse> on hidbus3 [...] hms1: 5 buttons and [XYW] coordinates ID=2 [...] usbhid4 on uhub1 [...] usbhid4: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus4: <HID bus> on usbhid4 [...] hcons1: <PRiMAX HP FY23 OMEN 16 KBM Consumer Control> on hidbus4 [...] usbhid5 on uhub1 [...] usbhid5: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus5: <HID bus> on usbhid5 [...] wlan0: link state changed to DOWN [...] Waiting (max 60 seconds) for system process `vnlru' to stop... done [...] Waiting (max 60 seconds) for system process `syncer' to stop... [...] Syncing disks, vnodes remaining... 0 0 0 0 0 0 done [...] All buffers synced. [...] Uptime: 1h8m10s [...] ---<<BOOT>>--- [...] Copyright (c) 9FFD-C07A The FreeBSD Project. [...] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [...] The Regents of the University of California. All rights reserved. [...] FreeBSD is a registered trademark of The FreeBSD Foundation. [...] FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64 [...] FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) [...] VT(efifb): resolution 1920x1200 [...] CPU: 13th Gen Intel(R) Core(TM) i7-13700HX (2304.00-MHz K8-class CPU) [...] Origin="GenuineIntel" Id=0xb06f2 Family=0x6 Model=0xbf Stepping=2 [...] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> [...] Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> [...] AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> [...] AMD Features2=0x121<LAHF,ABM,Prefetch> [...] Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> [...] Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> [...] Structured Extended Features3=0xfc18c410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> [...] XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> [...] IA32_ARCH_CAPS=0x1488fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> [...] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr [...] TSC: P-state invariant, performance statistics [...] real memory = 17179869184 (16384 MB) [...] avail memory = 16256065536 (15502 MB) [...] Event timer "LAPIC" quality 600 [...] ACPI APIC Table: <HPQOEM 8BB3 > [...] FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs [...] FreeBSD/SMP: Non-uniform topology [...] random: registering fast source Intel Secure Key RNG [...] random: fast provider: "Intel Secure Key RNG" [...] random: unblocking device. [...] ioapic0 <Version 2.0> irqs 0-119 [...] Launching APs: 1 13 11 18 16 12 10 3 15 2 9 20 8 5 14 21 23 7 22 6 4 19 17 [...] random: entropy device external interface [...] kbd1 at kbdmux0 [...] efirtc0: <EFI Realtime Clock> [...] efirtc0: registered as a time-of-day clock, resolution 1.000000s [...] smbios0: <System Management BIOS> at iomem 0x5691a000-0x5691a01e [...] smbios0: Version: 3.4, BCD Revision: 3.4 [...] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> [...] acpi0: <HPQOEM SLIC-MPC> [...] acpi_ec_ecdt_probe: can't get handle [...] acpi0: Power Button (fixed) [...] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 [...] Timecounter "HPET" frequency 19200000 Hz quality 950 [...] Event timer "HPET" frequency 19200000 Hz quality 350 [...] Event timer "HPET1" frequency 19200000 Hz quality 340 [...] Event timer "HPET2" frequency 19200000 Hz quality 340 [...] Event timer "HPET3" frequency 19200000 Hz quality 340 [...] Event timer "HPET4" frequency 19200000 Hz quality 340 [...] Event timer "HPET5" frequency 19200000 Hz quality 340 [...] Event timer "HPET6" frequency 19200000 Hz quality 340 [...] Event timer "HPET7" frequency 19200000 Hz quality 340 [...] atrtc1: <AT realtime clock> on acpi0 [...] atrtc1: Warning: Couldn't map I/O. [...] atrtc1: registered as a time-of-day clock, resolution 1.000000s [...] Event timer "RTC" frequency 32768 Hz quality 0 [...] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [...] Timecounter "i8254" frequency 1193182 Hz quality 0 [...] Event timer "i8254" frequency 1193182 Hz quality 100 [...] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [...] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [...] acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 [...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 [...] pci0: <ACPI PCI bus> on pcib0 [...] pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 [...] pci1: <ACPI PCI bus> on pcib1 [...] vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0x85000000-0x85ffffff,0x6000000000-0x61ffffffff,0x6200000000-0x6201ffffff at device 0.0 on pci1 [...] hdac0: <NVIDIA (0x22bd) HDA Controller> mem 0x86000000-0x86003fff at device 0.1 on pci1 [...] vgapci1: <VGA-compatible display> port 0x5000-0x503f mem 0x6202000000-0x6202ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 [...] vgapci1: Boot video device [...] pci0: <simple comms, UART> at device 18.0 (no driver attached) [...] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x84480000-0x8448ffff at device 20.0 on pci0 [...] xhci0: 32 bytes context size, 64-bit DMA [...] usbus0: waiting for BIOS to give up control [...] xhci_interrupt: host controller halted [...] usbus0 on xhci0 [...] usbus0: 5.0Gbps Super Speed USB v3.0 [...] pci0: <memory, RAM> at device 20.2 (no driver attached) [...] pci0: <network> at device 20.3 (no driver attached) [...] ig4iic0: <Intel Raptor Lake-M I2C Controller-0> at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] ig4iic0: controller error during attach-1 [...] device_attach: ig4iic0 attach returned 6 [...] pci0: <simple comms> at device 22.0 (no driver attached) [...] ig4iic0: <Intel Raptor Lake Additional Serial IO I2C Controller (0x7a7c)> at device 25.0 on pci0 [...] ig4iic0: Using MSI [...] ig4iic0: controller error during attach-1 [...] device_attach: ig4iic0 attach returned 6 [...] pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 [...] pcib2: failed to allocate initial memory window: 0x6c000000-0x841fffff [...] pci2: <ACPI PCI bus> on pcib2 [...] pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 [...] pcib3: failed to allocate initial memory window: 0x6c000000-0x840fffff [...] pci3: <ACPI PCI bus> on pcib3 [...] pcib4: <PCI-PCI bridge> at device 0.0 on pci3 [...] pci4: <PCI bus> on pcib4 [...] pci4: <serial bus, USB> at device 0.0 (no driver attached) [...] pcib5: <PCI-PCI bridge> at device 1.0 on pci3 [...] pcib5: failed to allocate initial memory window: 0x78100000-0x840fffff [...] pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci3 [...] pci5: <ACPI PCI bus> on pcib6 [...] xhci1: <Intel Maple Ridge Thunderbolt 4 USB controller> mem 0x78000000-0x7800ffff at device 0.0 on pci5 [...] xhci1: 32 bytes context size, 64-bit DMA [...] usbus1 on xhci1 [...] usbus1: 5.0Gbps Super Speed USB v3.0 [...] pcib7: <PCI-PCI bridge> at device 3.0 on pci3 [...] pcib8: <ACPI PCI-PCI bridge> at device 27.4 on pci0 [...] pci6: <ACPI PCI bus> on pcib8 [...] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x84304000-0x84304fff,0x84300000-0x84303fff at device 0.0 on pci6 [...] re0: Using 1 MSI-X message [...] re0: ASPM disabled [...] re0: Chip rev. 0x54000000 [...] re0: MAC rev. 0x00100000 [...] miibus0: <MII bus> on re0 [...] rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 [...] rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow [...] re0: Using defaults for TSO: 65518/35/2048 [...] re0: Ethernet address: ... [...] re0: netmap queues/slots: TX 1/256, RX 1/256 [...] pcib9: <ACPI PCI-PCI bridge> at device 29.0 on pci0 [...] pci7: <ACPI PCI bus> on pcib9 [...] nvme0: <Generic NVMe Device> mem 0x84200000-0x84203fff at device 0.0 on pci7 [...] pci0: <simple comms> at device 30.0 (no driver attached) [...] pci0: <simple comms> at device 30.1 (no driver attached) [...] ig4iic0: <Intel Raptor Lake Additional Serial IO I2C Controller (0x7a2b)> at device 30.3 on pci0 [...] ig4iic0: Using MSI [...] ig4iic0: controller error during attach-2 [...] device_attach: ig4iic0 attach returned 6 [...] isab0: <PCI-ISA bridge> at device 31.0 on pci0 [...] isa0: <ISA bus> on isab0 [...] pci0: <multimedia, audio> at device 31.3 (no driver attached) [...] pci0: <serial bus> at device 31.5 (no driver attached) [...] cpu0: <ACPI CPU> on acpi0 [...] acpi_button0: <Power Button> on acpi0 [...] acpi_tz0: <Thermal Zone> on acpi0 [...] acpi_tz1: <Thermal Zone> on acpi0 [...] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 [...] atkbd0: <AT Keyboard> irq 1 on atkbdc0 [...] kbd0 at atkbd0 [...] atkbd0: [GIANT-LOCKED] [...] battery0: <ACPI Control Method Battery> on acpi0 [...] acpi_acad0: <AC Adapter> on acpi0 [...] acpi_lid0: <Control Method Lid Switch> on acpi0 [...] acpi_syscontainer0: <System Container> on acpi0 [...] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 [...] atrtc0: Warning: Couldn't map I/O. [...] atrtc0: registered as a time-of-day clock, resolution 1.000000s [...] atrtc0: Can't map interrupt. [...] atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. [...] hwpstate_intel0: <Intel Speed Shift> on cpu0 [...] hwpstate_intel1: <Intel Speed Shift> on cpu1 [...] hwpstate_intel2: <Intel Speed Shift> on cpu2 [...] hwpstate_intel3: <Intel Speed Shift> on cpu3 [...] hwpstate_intel4: <Intel Speed Shift> on cpu4 [...] hwpstate_intel5: <Intel Speed Shift> on cpu5 [...] hwpstate_intel6: <Intel Speed Shift> on cpu6 [...] hwpstate_intel7: <Intel Speed Shift> on cpu7 [...] hwpstate_intel8: <Intel Speed Shift> on cpu8 [...] hwpstate_intel9: <Intel Speed Shift> on cpu9 [...] hwpstate_intel10: <Intel Speed Shift> on cpu10 [...] hwpstate_intel11: <Intel Speed Shift> on cpu11 [...] hwpstate_intel12: <Intel Speed Shift> on cpu12 [...] hwpstate_intel13: <Intel Speed Shift> on cpu13 [...] hwpstate_intel14: <Intel Speed Shift> on cpu14 [...] hwpstate_intel15: <Intel Speed Shift> on cpu15 [...] hwpstate_intel16: <Intel Speed Shift> on cpu16 [...] hwpstate_intel17: <Intel Speed Shift> on cpu17 [...] hwpstate_intel18: <Intel Speed Shift> on cpu18 [...] hwpstate_intel19: <Intel Speed Shift> on cpu19 [...] hwpstate_intel20: <Intel Speed Shift> on cpu20 [...] hwpstate_intel21: <Intel Speed Shift> on cpu21 [...] hwpstate_intel22: <Intel Speed Shift> on cpu22 [...] hwpstate_intel23: <Intel Speed Shift> on cpu23 [...] Timecounter "TSC-low" frequency 1152000687 Hz quality 1000 [...] Timecounters tick every 1.000 msec [...] ugen0.1: <Intel XHCI root HUB> at usbus0 [...] ugen1.1: <Intel XHCI root HUB> at usbus1 [...] ZFS filesystem version: 5 [...] ZFS storage pool version: features support (5000) [...] uhub0 on usbus1 [...] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 [...] hdacc0: <NVIDIA (0x00a6) HDA CODEC> at cad 0 on hdac0 [...] hdaa0: <NVIDIA (0x00a6) Audio Function Group> at nid 1 on hdacc0 [...] pcm0: <NVIDIA (0x00a6) (HDMI/DP 8ch)> at nid 4 on hdaa0 [...] pcm1: <NVIDIA (0x00a6) (HDMI/DP 8ch)> at nid 6 on hdaa0 [...] pcm2: <NVIDIA (0x00a6) (HDMI/DP 8ch)> at nid 7 on hdaa0 [...] uhub1 on usbus0 [...] uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [...] nda0 at nvme0 bus 0 scbus0 target 0 lun 1 [...] nda0: <KXG80ZNV1T02 KIOXIA HP01AP40 533FC3JUFWHK> [...] nda0: Serial Number... [...] nda0: nvme version 1.4 [...] nda0: 976762MB (2000409264 512 byte sectors) [...] ig4iic0: <Intel Raptor Lake-M I2C Controller-0> mem 0x80000000-0x80000fff irq 27 at device 21.0 on pci0 [...] ig4iic0: Using MSI [...] iicbus0: <Philips I2C bus> on ig4iic0 [...] uhub0: 4 ports with 4 removable, self powered [...] ig4iic1: <Intel Raptor Lake Additional Serial IO I2C Controller (0x7a7c)> mem 0x80001000-0x80001fff irq 31 at device 25.0 on pci0 [...] ig4iic1: Using MSI [...] iicbus1: <Philips I2C bus> on ig4iic1 [...] uhub1: 26 ports with 26 removable, self powered [...] ugen0.2: <PixArt USB Optical Mouse> at usbus0 [...] usbhid0 on uhub1 [...] usbhid0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0 [...] hidbus0: <HID bus> on usbhid0 [...] ig4iic2: <Intel Raptor Lake Additional Serial IO I2C Controller (0x7a2b)> mem 0x80002000-0x80002fff irq 37 at device 30.3 on pci0 [...] ig4iic2: Using MSI [...] ig4iic2: controller error during attach-2 [...] device_attach: ig4iic2 attach returned 6 [...] Trying to mount root from zfs:zroot/ROOT/default []... [...] ugen0.3: <Logitech Gaming Keyboard G213> at usbus0 [...] usbhid1 on uhub1 [...] usbhid1: <Logitech Gaming Keyboard G213, class 0/0, rev 2.00/9.00, addr 2> on usbus0 [...] hidbus1: <HID bus> on usbhid1 [...] hkbd0: <Logitech Gaming Keyboard G213> on hidbus1 [...] kbd2 at hkbd0 [...] usbhid2 on uhub1 [...] usbhid2: <Logitech Gaming Keyboard G213, class 0/0, rev 2.00/9.00, addr 2> on usbus0 [...] hidbus2: <HID bus> on usbhid2 [...] hkbd1: <Logitech Gaming Keyboard G213> on hidbus2 [...] kbd3 at hkbd1 [...] ugen0.4: <DRFCB0ABIHW6RC HP True Vision FHD Camera> at usbus0 [...] ugen0.5: <PRiMAX HP FY23 OMEN 16 KBM> at usbus0 [...] usbhid3 on uhub1 [...] usbhid3: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus3: <HID bus> on usbhid3 [...] hkbd2: <PRiMAX HP FY23 OMEN 16 KBM Keyboard> on hidbus3 [...] kbd4 at hkbd2 [...] usbhid4 on uhub1 [...] usbhid4: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus4: <HID bus> on usbhid4 [...] usbhid5 on uhub1 [...] usbhid5: <PRiMAX HP FY23 OMEN 16 KBM, class 0/0, rev 2.00/1.18, addr 4> on usbus0 [...] hidbus5: <HID bus> on usbhid5 [...] Root mount waiting for: usbus0 [...] ugen0.6: <HP, Inc HyperX Wireless Audio> at usbus0 [...] usbhid6 on uhub1 [...] usbhid6: <HP, Inc HyperX Wireless Audio, class 0/0, rev 2.00/41.00, addr 5> on usbus0 [...] hidbus6: <HID bus> on usbhid6 [...] ugen0.7: <vendor 0x8087 product 0x0033> at usbus0 [...] nvidia0: <NVIDIA GeForce RTX 4070 Laptop GPU> on vgapci0 [...] vgapci0: child nvidia0 requested pci_enable_io [...] vgapci0: child nvidia0 requested pci_enable_io [...] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 550.142 Wed Dec 11 04:40:21 UTC 2024 [...] Intel(R) Wireless WiFi based driver for FreeBSD [...] iwlwifi0: <iwlwifi> mem 0x6203144000-0x6203147fff at device 20.3 on pci0 [...] iwlwifi0: Detected crf-id 0x400410, cnv-id 0x80401 wfpm id 0x80000020 [...] iwlwifi0: PCI dev 7a70/0094, rev=0x430, rfid=0x2010d000 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0-83.ucode' [...] iwlwifi0: api flags index 2 larger than supported by driver [...] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [...] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either [...] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either [...] iwl-debug-yoyo_bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo_bin either [...] iwl_debug_yoyo_bin: could not load binary firmware /boot/firmware/iwl_debug_yoyo_bin either [...] iwlwifi0: loaded firmware version 83.e8f84e98.0 so-a0-gf-a0-83.ucode op_mode iwlmvm [...] iwlwifi0: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x430 [...] iwlwifi0: WRT: Invalid buffer destination: 0 [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-gf-a0.pnvm' [...] iwlwifi0: RFIm is deactivated, reason = 5 [...] iwlwifi0: loaded PNVM version 181407b3 [...] iwlwifi0: Detected RF GF, rfid=0x2010d000 [...] iwlwifi0: base HW address: XXX [...] ig4iic2: <Intel Raptor Lake Additional Serial IO I2C Controller (0x7a2b)> mem 0x80002000-0x80002fff irq 37 at device 30.3 on pci0 [...] ig4iic2: Using MSI [...] ig4iic2: controller error during attach-2 [...] device_attach: ig4iic2 attach returned 6 [...] ig4iic2: <Intel Raptor Lake Additional Serial IO I2C Controller (0x7a2b)> mem 0x80002000-0x80002fff irq 37 at device 30.3 on pci0 [...] ig4iic2: Using MSI [...] ig4iic2: controller error during attach-2 [...] device_attach: ig4iic2 attach returned 6 [...] acpi_wmi0: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi0: Embedded MOF found [...] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi1: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi1: Embedded MOF found [...] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi2: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi2: Embedded MOF found [...] ACPI: \134_SB.CPWM.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi3: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi3: Embedded MOF found [...] ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) [...] acpi_wmi4: <ACPI-WMI mapping> on acpi0 [...] acpi_wmi4: Embedded MOF found [...] hms0: <PixArt USB Optical Mouse> on hidbus0 [...] hms0: 8 buttons and [XYW] coordinates ID=0 [...] hcons0: <Logitech Gaming Keyboard G213 Consumer Control> on hidbus2 [...] hms1: <PRiMAX HP FY23 OMEN 16 KBM Mouse> on hidbus3 [...] hms1: 5 buttons and [XYW] coordinates ID=2 [...] hcons1: <PRiMAX HP FY23 OMEN 16 KBM Consumer Control> on hidbus4 [...] hcons2: <HP, Inc HyperX Wireless Audio Consumer Control> on hidbus6 [...] iwlwifi0: WRT: Invalid buffer destination: 0 [...] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [...] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [...] iwlwifi0: WFPM_AUTH_KEY_0: 0x90 [...] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [...] iwlwifi0: RFIm is deactivated, reason = 5 [...] wlan0: Ethernet address: ... [...] re0: link state changed to DOWN [...] lo0: link state changed to UP [...] wlan0: link state changed to UP [...] Cuse v0.1.37 @ /dev/cuse